References
B. W. Mott, “Micro-Indentation Hardness Testing” (Butterworths Scientific Publication, London, 1956).
H. Buckle, in “The Science of Hardness Testing and Its Research Applications, American Society for Metals,” edited by J.W. Westbrook and H. Conrad (American Society for Metals, Ohio) p. 453.
C. A. Brookes, in “Science of Hard Materials, Jackson, Wyoming, 1981,” edited by R. K. Viswanadham, D. J. Rowcliffe and J. Gurland (Plenum Press, New York, 1983) p. 181.
I. J. Mccolm, in “Ceramic Hardness” (Plenum, New York, 1990) p. 119.
P. M. Sargent, in “Microindentation Techniques in Material Science and Engineering,” edited by P. J. Blau and B. R. Lawn (ASTM, Philadelphia, 1986) p. 129.
S. J. Bull, T. F. Page and E. H. Yoffe, Phil. Mag. A 59(6) (1989) 281.
M. Atkinson, Int J. Mech. Sci. 33(10) (1991) 843.
H. Li and R. C. Bradt, J. Hard Mater. 3 (1992) 403.
H. Li and R. C. Bradt, J. Mater. Sci. 28 (1993) 917.
J. H. Gong and Z. D. Guan, Mater. Let. 47 (2001) 140.
D. B. Marshall and B. R. Lawn, in “Microindentation Techniques in Material Science and Engineering,” edited by P. J. Blau and B. R. Lawn (ASTM, Philadelphia, 1986) p. 26.
S. Luyckx, C. M. Demanet and S. Shrivastava, J. Mater. Sci. Let. 18 (1999) 705.
W. D. Nix and H. J. Gao, J. Mech. Phys. Solids 46(3) (1998) 411.
Q. Ma and D. R. Clarke, J. Mat. Res. 10 (1995) 853.
N. Gane and J. M. Cox, Phil. Mag. 22 (1970) 881.
J. C. Pethica, R. Hutchings and W. C. Oliver, Phil. Mag. A 48 (1983) 593.
C. Hays and E. G. Kendall, Metall. 6 (1973) 275.
H. Li, A. Ghosh, Y. H. Han and R. C. Bradt, J. Mater. Res. 8 (1993) 1028.
M. Atkinson, J. Mater. Sci. 33 (1998) 2937.
X. J. Ren, R. M. Hooper, C. Griffiths and L. J. Henshall, Phil. Mag. A 48(10) (2002) 1087.
X. J. Ren, R. M. Hooper, C. Griffiths and L. J. Henshall, J. Mater. Sci. Let. 20 (2001) 1819.
J. D. J. Ross, Ph.D. thesis, University of Exeter, 1985.
D. J. Green, “An Introduction to the Mechanical Properties of Ceramics” (Cambridge University Press, Cambridge, 1998).
C. A. Brookes, “2nd Int. Conf. on the Sci. of Hard Mater” (Rhodes, Greece, 1985) (Phys Conference Ser. No. 75) p. 207.
M. G. S. Naylor and T. F. Page, in Proc. 5th Int. Conf. on Erosion by Solid and Liquid Impact (Cambridge, 1979).
D. J. Clinton and R. Morrell, Mater. Chem. Phys. 17 (1973) 461.
M. G. Mendiratta and J. J. Petrovic, J. Mater. Sci. Let. 11 (1976) 972.
R. C. Devries, G E C Report No. 72CRD178, Schenectady, New York, 1972.
D. W. Richerson, “Modern Ceramic Engineering-Properties, Processing and Use in Design” (Marcell Dekker Inc., New York, 1992).
X. J. Ren, R. M. Hooper, C. Griffiths and L. J. Henshall (unpublished data).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Ren, X.J., Hooper, R.M., Griffiths, C. et al. Indentation size effect in ceramics: Correlation with H/E. Journal of Materials Science Letters 22, 1105–1106 (2003). https://doi.org/10.1023/A:1024947210604
Issue Date:
DOI: https://doi.org/10.1023/A:1024947210604