Abstract
Fatigue failure of bone has been implicated in a number of clinical failure scenarios. At the material level, the fatigue behaviour of cancellous bone is poorly understood. At the continuum level, the fatigue behaviour of cortical and cancellous bone are similar, exhibiting material degradation during a fatigue test. Using a combined continuum damage mechanics and finite element approach, two key questions were addressed: (i) What purpose does material degradation serve in vivo? (ii) Can the fatigue behaviour of cancellous bone be predicted by applying cortical bone data at the trabecular tissue level?
Material degradation significantly increases the life of a sample, by reducing the peak stresses and redistributing the load to the surrounding tissue. The application of cortical bone data to trabecular tissue appears to give reasonable estimates of the fatigue life of cancellous bone. Modulus degradation appears to be a result of trabecular fracture rather than as a result of tissue level material degradation. At present, the models only predict permanent strains of approximately 10% of the initial applied strains, as compared to the 100–200% reported in experimental studies.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Taylor, M. and Tanner, K.E., ‘Fatigue failure of cancellous bone: a possible cause of implant migration and loosening’, J. Bone. Joint. Surg. Br. 79(2) (1997) 181-182.
Zioupos, P., Wang, X.T. and Currey, J.D., ‘The accumulation of fatigue microdamage in human cortical bone of two different ages in vitro’, Clin. Biomech. 11(7) (1996) 365-375.
Zioupos, P., Wang, X.T. and Currey, J.D., ‘Experimental and theoretical quantification of the development of damage in fatigue tests of bone and antler’, J. Biomech. 29(8) (1996) 989-1002.
Pattin, C.A., Caler, W.E. and Carter, D.R., ‘Cyclic mechanical property degradation during fatigue loading of cortical bone’, J. Biomech. 29(1) (1996) 69-79.
Choi, K. and Goldstein, S.A., ‘A comparison of the fatigue behavior of human trabecular and cortical bone tissue’, J. Biomech. 25(12) (1992) 1371-1381.
Taylor, M., ‘A combined finite element method and continuum damage mechanics approach to simulate the in vitro fatigue behavior of human cortical bone’, J. Mater. Sci.: Mater. Med. 10(12) (1999) 841-846.
Bowman, S.M., et al., ‘Creep contributes to the fatigue behavior of bovine trabecular bone’, J. Biomech. Eng. 120 (1998) 647-654.
Michel, M.C., et al., ‘Compressive fatigue behavior of bovine trabecular bone’, J. Biomech. 26(4-5) (1993) 453-463.
Rho, J.-Y., Kuhn-Spearing, L. and Zioupos, P., ‘Mechanical properties and the hierarchical structure of bone’, Med. Eng. Phys. 20 (1998) 92-102.
Griffin, L., et al., ‘Model of flexural fatigue damage accumulation for cortical bone’, J. Orthopedic Res. 15 (1997) 607-614.
Guo, X.-D.E., et al., ‘Finite element modeling of damage accumulation in trabecular bone under cyclic loading’, J. Biomech. 27(2) (1993) 145-155.
Gibson, L.J. and Ashby, M.F., Cellular Solids: Structure and Properties, 2nd edn, Cambridge University Press, Cambridge, 1997.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Taylor, M., Cotton, J. & Zioupos, P. Finite Element Simulation of the Fatigue Behaviour of Cancellous Bone* . Meccanica 37, 419–429 (2002). https://doi.org/10.1023/A:1020848007201
Issue Date:
DOI: https://doi.org/10.1023/A:1020848007201