Abstract
Purpose. The objective was to prepare polymeric microparticles by atomizing organic polymer solutions into a spray chamber containing compressed CO2 (PCA-process) and to study the influence of various process parameters on their morphological characteristics.
Methods. The swelling of various pharmaceutically acceptable polymers [ethyl cellulose, poly(methyl methacrylate), poly(ε-caprolactone), poly(dl-lactide), poly(l-lactide) and poly(dl-lactide-glycolide) copolymers] in CO2 was investigated in order to find polymers which did not agglomerate during the spraying process. Poly(l-lactide) (L-PLA) microparticles were prepared by spraying the organic polymer solution into CO2 in a specially designed spraying apparatus. The effect of various process (pressure and temperature of the CO2 phase, flow rate) and formulation (polymer concentration) variables on the morphology and particle size of L-PLA-microparticles was investigated.
Results. Polymers with low glass transition temperatures agglomerated even at low temperatures. The formation of microparticles was favored at moderate temperatures, low polymer concentrations, high pressures and high flow rates of CO2. High polymer concentrations and low flow rates resulted in the formation of polymeric fibers. Colloidal L-PLA particles could also be prepared with this technique in a surfactant-free environment. Initial studies on the microencapsulation of drugs resulted in low encapsulation efficiencies.
Conclusions. The PCA method is a promising technique for the preparation of drug-containing microparticles. Potential advantages of this method include the flexibility of preparing microparticles of different size and morphology, the elimination of surfactants, the minimization of residual organic solvents, low to moderate processing temperatures and the potential for scale-up.
Similar content being viewed by others
REFERENCES
P. B. Deasy. Microencapsulation and Related Drug Processes. Marcel Dekker, New York, 1984.
A. Kondo. Microcapsule Processing and Technology, Marcel Dekker, New York, 1979.
R. Bodmeier and J. Wang. Microencapsulation of drugs with aqueous colloidal polymer dispersions. J. Pharm. Sci. 82(2): 191–194 (1993).
M. A. McHugh and V. J. Krukonis. Supercritical fluid extraction principles and practice, Butterwirths, Stoneham, MA, (1986).
K. P. Johnston, S. Kim, and J. R. Combes. Spectroscopic determination of solvent strength and structure in supercritical fluid mixtures: A Review. In K. P. Johnston and J. M. L. Penninger (eds.), Supercritical Fluid Science and Technology, ACS Symposium series #406, American Chemical Society, Washington, DC, 1989.
E. Stahl, K. W. Quirin, and D. Gerard. Dense Gases for Extraction and Refining, Springer-Verlag, Berlin, 1987.
D. W. Matson, R. C. Petersen, and R. D. Smith. Production of powders and films by the rapid expansion of supercritical solutions. J. Mater. Sci., 22:1919–1928 (1987).
J. W. Tom and P. Debenedetti. Particle formation with supercritical fluids: A review. J. Aerosol Sci. 22:555–584 (1991).
J. W. Tom and P. Debenedetti. Formation of bioerodible micro-spheres and microparticles by rapid expansion of supercritical solutions. Biotechnol. Prog. 7:403–411 (1991).
A. K. Lele and A. D. Shine. Morphology of polymers precipitated from a supercritical solvent. AIChE J. 38:7442–752 (1992).
E. M. Phillips and V. J. Stella. Rapid expansion from supercritical solutions: application to pharmaceutical processes. Int. J. Pharm. 94:1–10 (1993).
R. Bodmeier and H. Chen. Preparation of biodegradable poly(±)lactide microparticles using a spray-drying technique. J. Pharm. Pharmacol. 40:754–757 (1988).
B. W. Müller and W. Fischer. Verfahren zur Herstellung einer mindestens einen Wirkstoff und einen Träger umfassenden Zubereitung, German Patent Appl. No. DE 3744329 AI, 1989.
D. J. Dixon and K. P. Johnston. Molecular thermodynamics of solubilities in gas anti-solvent crystallization. AICHE J. 37:1441–1449 (1991).
D. J. Dixon. Ph.D. dissertation, The University of Texas at Austin, Austin, TX, 1992.
D. J. Dixon, R. Bodmeier, and K. P. Johnston. Polymeric materials formed by precipitation with a compressed fluid antisolvent. AICHE J., 39:127–139 (1993).
D.J. Dixon and K.P. Johnston. Microporous polymer fibers and oriented fibrils by precipitation with a compressed fluid antisolvent. J. Appl. Polym. Sci., in press.
T. W., Randolph, A. D. Randolph, M. Mebes, and S. Yeung. Sub-micron sized biodegradable particles of poly(l)lactic acid in the gas anti-solvent spray precipitation process. Biotechnol. Progress 9:429–435 (1993).
J. Bleich, B. W. Müller, and W. Waßmus. Aerosol solvent extraction system — a new microparticle production technique. Int. J. Pharm. 97:111–117 (1993).
P. D. Condo, I. C. Sanchez, C. G. Panayiotou, and K. P. Johnston. Glass transition behavior including retrograde vitrification of polymers with compressed fluid diluents. Macromolecules 25:6119–6127 (1992).
P. D. Condo and K. P. Johnston. In-situ measurements of the glass transition temperature of polymers with compressed fluid diluents. J. Poly. Sci.: Part B: Polym. Phys. in press.
K.A. Larson and M. L. King. Evaluation of supercritical fluid extraction in the pharmaceutical industry. Biotech. Progress, 2:73–82 (1986).
R. Bodmeier and J. W. McGinity. The preparation and evaluation of drug-containing poly(dl-lactide) microspheres formed by the solvent evaporation method. Pharm. Res. 4(6):465–471 (1987).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Bodmeier, R., Wang, H., Dixon, D.J. et al. Polymeric Microspheres Prepared by Spraying into Compressed Carbon Dioxide. Pharm Res 12, 1211–1217 (1995). https://doi.org/10.1023/A:1016276329672
Issue Date:
DOI: https://doi.org/10.1023/A:1016276329672