Abstract
This paper discusses a fuzzy logic control system designed to determine, regulate and maintain the amount of suction needed by a robotic gripper system to perform reliable limp material manipulation. A neuro-fuzzy approach is followed to determine the amount of desired suction (depending on experimentally derived data and plant characteristics). A knowledge-based valve controller is then designed to generate, regulate and maintain the amount of suction calculated by the neuro-fuzzy suction module. The performance of the overall suction control system is compared with actual experimental results obtained when using a prototype gripper system to handle limp material. Further, performance of the fuzzy logic based valve controller is compared to conventional PD and PID controllers. The proposed control scheme is found to enhance the overall functionality of the prototype robotic gripper system.
Similar content being viewed by others
References
Kolluru, R., Valavanis, K. P., and Hebert, T.: Modeling, analysis and performance evaluation of a robotic gripper for limp material handling, IEEE Trans. on Systems, Man and Cybernetics 20(3) (1998), 480–486.
Hebert, T., Valavanis, K. P., and Kolluru, R.: A real time hierarchical sensor-based robotic system architecture, J. Intell. Robotic Syst. 7 (1997), 1–27.
Monkman, G. J.: Robot grippers for use with fibrous materials, Internat. J. Robotics Research 1(2) (1995), 144–151.
Driankov, D., Hellendoorn, H., and Reinfrank, M.: An Introduction to Fuzzy Control, 2nd edn., Springer-Verlag, 1996.
Dubois, D. and Prade, H.: Fuzzy Sets and Systems: Theory and Applications, Academic Press, New York, 1980.
Morton, W. E. and Hearle, J.W. S.: Physical Properties of Textile Fabrics, The Textile Institute, UK, 1992.
Modi, P. N. and Seth, S. M.: Hydraulic and Fluid Mechanics, 10th edn., Standard Book House, India, 1991.
Janna, W. S.: Introduction to Fluid Mechanics, PWS Engineering, Boston, MA, 1987.
Fuzzy Logic Toolbox User's Guide, The MathWorks, Inc., 3rd printing, 1998.
Jang, J.-S. R., Sun, C.-T., and Mizutani, E.: Neuro-Fuzzy and Soft Computing: A Computational Approach to Learning and Machine Intelligence, Prentice-Hall, Upper Saddle River, NJ, 1997.
Nauck, D., Klawonn, F., and Kruse, R.: Foundations of Neuro-Fuzzy Systems, Wiley, Chichester, 1997.
Jang, J.-S. R.: ANFIS: Adaptive-network-based fuzzy inference systems, IEEE Trans. on Systems, Man, and Cybernetics 23(3) (1993), 665–685.
Tsourveloudis, N. C., Kolluru, R., and Valavanis, K. P.: Fuzzy control of suction-based robotic gripper system, in: Proc. 1998 IEEE Internat. Conf. on Control Applications, Trieste, Italy, 1998, pp. 653–657.
Mamdani, E. H. and Assilian, S.: An experiment in linguistic synthesis with a fuzzy logic controller, Internat. J. Man-Machine Studies 7 (1975), 1–13.
Takagi, T. and Sugeno, M.: Fuzzy identification of systems and its applications to modeling and control, IEEE Trans. on Systems, Man, and Cybernetics 15 (1985), 116–132.
Nauck, D. and Kruse, R.: A neuro-fuzzy approach to obtain interpretable fuzzy systems for function approximation, Proc. 1998 IEEE Internat. Conf. Fuzzy Systems, Anchorage, AK, 1998, pp. 1106–1111.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Tsourveloudis, N.C., Kolluru, R., Valavanis, K.P. et al. Suction Control of a Robotic Gripper: A Neuro-Fuzzy Approach. Journal of Intelligent and Robotic Systems 27, 215–235 (2000). https://doi.org/10.1023/A:1008182619159
Issue Date:
DOI: https://doi.org/10.1023/A:1008182619159