Abstract
The 〈100〉, 〈111〉 and 〈110〉 textures of copper electrodeposits obtained from copper sulfate baths changed to the 〈100〉, 〈100〉 and 〈\(\sqrt {\text{3}} 10\)〉 textures, respectively, after recrystallization. The textures of chromium electrodeposits obtained from the standard Sargent bath remained unchanged after recrystallization. The results are in agreement with the prediction of the strain energy release maximization model, in which the recrystallized grains orient themselves so that their minimum elastic modulus direction can be parallel to the absolute maximum internal stress direction due to dislocations in the non-recrystallized grains.
Similar content being viewed by others
References
G. I. Finch, H. Wilman and L. Yang, Disc. Faraday Soc. 1 (1947) 144.
N. A. Pangarov, Electrochim. Acta 7 (1962) 139.
Idem., ibid. 9 (1962) 721.
D. N. Lee and Y. W. Chang, J. Korean Inst. Met. 12 (1974) 243.
J-R. Park and D. N. Lee, ibid. 14 (1976) 359.
G. C. Ye and D. N. Lee, Plat. and Surf. Fin. 68 (1981) 60.
D. N. Lee Idem., in “Chemical Metallurgy-Attribute to Carl Wagner,” edited by N. A. Gokcen (TMS-AIME, 1981) p. 493.
D. N. Lee, in “Proc. 3rd Asian-Metal Finishing Forum,” edited by D. N. Lee (Korean Inst. Surface Eng., Seoul, 1989) p. 203.
Idem., in “Mat. Res. Soc. Symp. Proc. Vol. 427,” edited by K. N. Tu, J. W. Mayer, J. M. Poate and L. J. Chen (MRS, 1996) p. 167.
D. N. Lee and G. C. Ye, Plat. and Surf. Fin. 68 (1981) 46.
X. Ye, M. De Bonte, J. P. Celis and J. R. Roos, J. Electrochem Soc. 139 (1992) 1592.
S. Kang, J. Yang and D. N. Lee, Plat. and Surf. Fin. 82 (1995) 67.
D. N. Lee, S. Kang and J. Yang, ibid. 82 (1995) 76.
J. Yang and D. N. Lee, Met. Mater. 5 (1999) 465.
H.-S. Nam and D. N. Lee, J. Electrochem. Soc. 146 (1999) 33.
D. N. Lee, Scripta Metall. Mater. 32 (1995) 1689.
A. P. Sutton and R. W. Ballufi, “Interfaces in Crystalline Materials” (Clarendon Press, Oxford, 1996) p. 115.
D. N. Lee, Metals and Materials 2 (1996) 121.
Idem., Texture. Microstructure. 26/27 (1996) 361.
S.-H. Hong, H.-T. Jeong, C.-H. Choi and D. N. Lee, Mater. Sci. Eng. A229 (1997) 174.
C.-H. Choi and D. N. Lee, Metall. Mater. Trans. 28A (1997) 2217.
D. N. Lee and H.-T. Jeong, Scripta Metall. Mater. 38 (1998) 1219.
Y. B. Park, D. N. Lee and G. Gottstein, Acta Mater. 46 (1998) 3371.
S. H. Lee and D. N. Lee, Mater. Sci. Eng. A249 (1998) 84.
D. N. Lee, H.-T. Jeong and H.-J. Shin, Met. Mater. 4 (1998) 391.
D. N. Lee and H.-T. Jeong, Mater. Sci. Eng. A269 (1999) 49.
D. N. Lee and K.-H. Hur, Scripta Mater. 40 (1999) 1333.
H. J. Bunge, “Texture Analysis in Materials Science” (Butterworths, London, 1982).
C. N. Reid, “Deformation Geometry for Materials Scientists” (Pergamon Press, Oxford, 1973).
W. C. Overton Jr. and J. Gaffney, Phys. Rev. 98 (1997) 969.
D. I. Bolef and J. De Klerk, ibid. 129 (1963) 1063.
Rights and permissions
About this article
Cite this article
Choi, J.H., Kang, S.Y. & Lee, D.N. Relationship between deposition and recrystallization textures of copper and chromium electrodeposits. Journal of Materials Science 35, 4055–4066 (2000). https://doi.org/10.1023/A:1004834204320
Issue Date:
DOI: https://doi.org/10.1023/A:1004834204320