Abstract
In order to lucubrate the rolling characteristic of the two stands reversible cold rolling mill and establish the tension and thickness control strategy, the steady-state characteristic simulating program was established using the steady-state continuous rolling theory. The influences of each factor on exit thickness under different tension control methods were analyzed. The results show that, the influence of the entry stand gap on exit thickness is significant and it changes little with different tension control methods. As a result, the entry stand gap can be used as the main control method of exit thickness, whereas rolling speed of any stand and roll gap of the exit stand can be used to adjust the inter-stand tension. The results are beneficial for thickness and tension control of the two stands reversible cold rolling mill.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
ZHANG Jin-zhi, ZHENG Xuefeng. Steady State Mathematical Model and Transfer Coefficient of Tandem Cold Reduction Mills [J]. Iron and Steel, 1979, 14(3): 59 (in Chinese).
HUANG Ke-qin, CHEN He-tie. Improvement of the Misaka Yashisuke s Influence Coefficient Method [J], Metallurgical Industry Automation, 1983, 1: 37 (in Chinese).
YANG Jie. The Mathematical Models of Rolling Process [M]. Beijing: Metallurgical Industry Press, 1992 (in Chinese).
SUN Yi-kang. The Computer Control of the Strip Cold Rolling [M]. Beijing: Metallurgical Industry Press, 2001 (in Chinese).
Bryant G F. Automation of Tandem Mills [M]. London: Iron and Steel Institute, 1973.
LIU Jiang, LI Hong-cui. Brief Introduction of Jigang Two Stand Four High Reversing Cold Mill Unit [J]. Shandong Metallurgy, 2006, 28(6): 20 (in Chinese).
GUO Remn-min. Analysis of Dynamic Behaviors of Tandem Cold Mills Using Generalized Dynamic and Control Equations [J]. IEEE Transactions on Industry Applications, 2000, 36(3): 842.
LIU Guang-ming, HOU Ze-yue, HAO Liang, et al. Analysis on the Static Characteristic of the Two Stands Reversible Cold Rolling Mill [J]. Shanghai Metals, 2008, 30(S): 109 (in Chinese).
Author information
Authors and Affiliations
Corresponding author
Additional information
Foundation Item: Item Sponsored by National Basic Research Program of China (2011CB612204); Doctoral Scientific Research Fund of Taiyuan University of Science and Technology of China (20112007)
Rights and permissions
About this article
Cite this article
Liu, Gm., Di, Hs., Zhou, Cl. et al. Tension and Thickness Control Strategy Analysis of Two Stands Reversible Cold Rolling Mill. J. Iron Steel Res. Int. 19, 20–25 (2012). https://doi.org/10.1016/S1006-706X(12)60146-0
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1016/S1006-706X(12)60146-0