Spherical indentation of porous ceramics: Cracking and toughness

https://doi.org/10.1016/j.jeurceramsoc.2016.05.010Get rights and content
Under a Creative Commons license
open access

Abstract

A combined experimental-numerical approach is used to characterise the fracture of a porous bulk ceramic material (La0.6Sr0.4Co0.2Fe0.8O3) with porosities of 5–45%, undergoing spherical indentation. The Gurson model was used in FEM to describe the porosity densification. Indentation-induced radial cracks were observed, when the applied contact pressure exceeded threshold values, with no Hertzian ring-cone cracks found. FEM analysis indicated that the cracks propagated mainly during unloading, driven by the tensile hoop stress generated near the contact circle. The stress intensity at the crack tip was estimated using an approximate analysis of the FEM stress field to derive toughness values that were consistent with values determined by conventional methods, provided that the crack length is sufficiently large compared with the contact radius and can be measured accurately. The absence of ring-cone cracks during loading is due to the material’s high modulus-to-hardness ratio and the small indenter radius as predicted by established theory.

Keywords

Porous ceramics
Spherical indentation
Finite element modelling
Cracking behaviour
Fracture toughness

Cited by (0)