Screen printing: a technology for the batch fabrication of integrated chemical-sensor arrays

https://doi.org/10.1016/0925-4005(94)01249-0Get rights and content

Abstract

The commercialization of integrated chemical sensor has been slowed by the difficulty of device encapsulation and membrane application. For reasons of both cost and reproducibility, the sensor-specific structures should be mass fabricated, as are the microelectronics. The challenge lies in merging the standard semiconductor process sequence with the non-standard steps used to form the transducers. We demonstrate that screen printing can be used to partition the fabrication into two distinct sequences, semiconductor processing and sensor-specific steps. This simplifies process development and evolution, and makes semiconductor foundry services available for manufacturing sensors. After conventional semiconductor processing, our wafers have silver epoxy contacts screen printed on the aluminum sensor pads; the silver forms a stable chemical interface to the membranes, and the epoxy makes a strong physical bond to them. Next, the polymeric membranes are applied and patterned with screen printing. Membranes of different compositions can be deposited on the various sites of a multisensor chip by simply repeating the screen print/cure cycle. We show that the electrochemical performance of mass-fabricated passive and active sensor arrays is comparable to that of conventional liquid-junction ion-selective electrodes.

References (36)

  • N. Ho et al.

    Encapsulation of polymeric membrane-based ion-selective field-effect transistors

    Sensors and Actuators

    (1983)
  • K. Potje-Kamloth et al.

    Electrochemical encapsulation for sensors

    Sensors and Actuators

    (1989)
  • K.D. Wise et al.

    The coming opportunities in microsensor systems

    Tech. Digest, 6th Int. Conf. Solid-State Sensors and Actuators (Transducers ′91), San Francisco, CA, USA

    (24281991)
  • R.B. Brown

    An integrated multiple-sensor chamical transducer

    (1985)
  • J. Kimura et al.

    An integrated SOS/FET multi-biosensor and its application to medical use

    Tech. Digest, 3rd Int. Conf. Solid-State Sensors and Actuators, Transducers ′85, Philadelphia, PA, USA

    (791985)
  • K. Bezegh et al.

    Multisensing ion-selective field-effect transistors prepared by ionophore doping technique

    Anal. Chem.

    (1987)
  • A. van den Berg et al.

    An on-wafer fabricated free-chlorine sensor

    Tech. Digest, 6th Int. Conf. Solid-State Sensors and Actuators (Transducers ′91), San Francisco, CA, USA

    (24281991)
  • S.N. Cozette et al.

    Method of manufacturing a plurality of uniform microfabricated sensing devices having an immobilized ligand receptor

    (51991)
  • Cited by (97)

    View all citing articles on Scopus
    View full text