Some potential applications for conductive polymers
References (18)
Solid State Ionics
(1983)Polymer
(1981)- et al.
J. Power Sources
(1987) - et al.
Synth. Met.
(1987) Synth. Met.
(1987)- et al.
J. Electrochem. Soc.
(1985) - et al.
J. Am. Chem. Soc.
(1984) - et al.
J. Chem. Soc., Chem. Commun.
(1986) - et al.
J. Electrochem. Soc.
(June 1987)
There are more references available in the full text version of this article.
Cited by (10)
Polyaniline nanocomposites via in situ emulsion polymerization based on montmorillonite: Preparation and characterization
2015, Arabian Journal of ChemistryCitation Excerpt :However, PAn prepared in the inorganic acid media by chemical oxidation polymerization has some drawbacks, that it is inherently brittle and poor in process ability due to its insolubility in common organic solvents. The limited industrial applications of polyaniline (PAn) are due to its poor solubility (Inganäs and Lundström, 1987). The oxidation of aniline in acidic aqueous media using ammonium peroxydisulfate as oxidant has become the most widely used synthetic route to conducting PAn and is obtained as the protonated emeraldine salt, (green color).
Electrochemical properties of polythiophene depending on preparation conditions
1999, Applied Surface ScienceConducting blends of soluble polyurethane and poly(o-methoxyaniline)
1995, Synthetic MetalsElectrochemistry of conducting polymers
1991, Synthetic MetalsModelling of polymer batteries
1989, Solid State Ionics
Copyright © 1987 Published by Elsevier B.V.