Effect of interstitial solutes on the strength and ductility of titanium
References (453)
Acta Met.
(1959)- et al.
The Science Technology and Application of Titanium
- et al.
J. Less Com. Met.
(1964) Acta Met.
(1955)- et al.
Scripta Met.
(1969) - et al.
Scripta Met.
(1971) - et al.
Acta Met.
(1954) - et al.
Scripta Met.
(1972) The Science, Technology and Application of Titanium
Acta Met.
(1967)
Mat. Sci. Eng.
(1970)
Metallog.
(1975)
Acta Met.
(1955)
Acta Met.
(1962)
The Science, Technology and Application of Titanium
Z. f. Metallk.
(1968)
Phil. Mag.
(1972)
Phys. Stat. Sol.
(1970)
Defects in Refractory Metals
(1971)
Prog. Met. Phys.
(1968)
Titanium Science and Technology
Physics of Solid Solution Strengthening
Physics of Solid Solution Strengthening
Introduction to Solid State Physics
(1968)
Titanium
(1956)
Constitution of Binary Alloys
(1958)
The Science Technology and Application of Titanium
Trans. AIME
(1950)
Trans. AIME
(1964)
Effect of Hydrogen on the Mechanical Properties of Titanium and Its Alloys
Z. Anorg. Chem.
(1941)
J. Phys. Soc. Japan
(1966)
Trans AIME
(1949)
Trans. AIME
(1950)
Acta Chem. Scand.
(1962)
Trans AIME
(1959)
Acta Chem. Scand.
(1957)
Trans AIME
(1953)
Acta Chem. Scand.
(1961)
Trans AIME
(1963)
Titanium Science and Technology
Trans AIME
(1964)
Phys. Rev.
(1964)
Trans. TMS-AIME
(1968)
Trans AIME
(1953)
Trans. ASM
(1957)
Deformation Kinetics in Titanium and Titanium Alloys at Low Temperatures
Cited by (684)
Advances in additively manufactured titanium alloys by powder bed fusion and directed energy deposition: Microstructure, defects, and mechanical behavior
2024, Journal of Materials Science and TechnologyImpact of plastic strain amplitude on the cyclic behavior of commercially pure titanium grade 2
2024, International Journal of FatigueEffects of oxygen on microstructure and mechanical properties of selective laser melted Ti–6Al–4V annealed at different temperatures
2024, Materials Science and Engineering: AResearch on the anisotropic mechanism of plastic behavior during tensile process of textured pure titanium
2024, Materials Science and Engineering: AInfluence of an oxygen-enriched layer on the tensile properties of an alpha titanium alloy
2024, Materials Today CommunicationsHigh wear resistance of uniform nitriding titanium composites fabricated by in-situ laser powder bed fusion
2024, Composites Part A: Applied Science and Manufacturing
- ∗
Presently with Materials Engineering Department, North Carolina State University, Raleigh, N.C. 27650
Copyright © 1981 Published by Elsevier Ltd.