Skip to main content
SpringerLink
Log in

Smart manufacturing: Past research, present findings, and future directions

  • Published:
International Journal of Precision Engineering and Manufacturing-Green Technology Aims and scope Submit manuscript

Abstract

Today, the manufacturing industry is aiming to improve competitiveness through the convergence with cutting-edge ICT technologies in order to secure a new growth engine. Smart Manufacturing, which is the fourth revolution in the manufacturing industry and is also considered as a new paradigm, is the collection of cutting-edge technologies that support effective and accurate engineering decision-making in real time through the introduction of various ICT technologies and the convergence with the existing manufacturing technologies. This paper surveyed and analyzed various articles related to Smart Manufacturing, identified the past and present levels, and predicted the future. For these purposes, 1) the major key technologies related to Smart Manufacturing were identified through the analysis of the policies and technology roadmaps of Germany, the U.S., and Korea that have government-driven leading movements for Smart Manufacturing, 2) the related articles on the overall Smart Manufacturing concept, the key system structure, or each key technology were investigated, and, finally, 3) the Smart Manufacturing-related trends were identified and the future was predicted by conducting various analyses on the application areas and technology development levels that have been addressed in each article.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Similar content being viewed by others

References

  1. National Institute of Standard and Technology, “Smart Manufacturing Operations Planning and Control,” http://www.nist.gov/el/msid/ syseng/upload/FY2014_SMOPAC_ProgramPlan.pdf (Accessed 20 December 2015)

    Google Scholar 

  2. Kagermann, H., Helbig, J., Hellinger, A., and Wahlster, W., “Recommendations for Implementing the Strategic Initiative Industrie 4.0: Securing the Future of German Manufacturing Industry; Final Report of the Industrie 4.0 Working Group,” Forschungsunion, 2013.

    Google Scholar 

  3. Smart Manufacturing Leadership Coalition, “Implementing 21st century smart manufacturing,” https://smartmanufacturingcoalition. org/sites/default/files/implementing_21st_century_smart_manufact uring_report_2011_0pdf (Accessed 20 December 2015)

    Google Scholar 

  4. Smart Process Manufacturing Engineering Virtual Organization Steering Committee, “Smart Process Manufacturing: An Operations and Technology Roadmap,” https://smartmanufacturingcoalitionorg/ sites/default/files/spm_-_an_operations_and_technology_roadmappdf (Accessed 20 December 2015)

    Google Scholar 

  5. Korea Institute for the Advancement of Technology, “Research Trend of Smart Manufacturing in the U.S.,” June, 2014.

    Google Scholar 

  6. Roland Berger Strategy Consultants GMBH, “Industry 4.0: The New Industrial Revolution-How Europe will Succeed,” http:// wwwrolandbergercom/media/pdf/Roland_Berger_TAB_Industry_4 _0_20140403pdf (Accessed 20 December 2015)

    Google Scholar 

  7. Wang, S., Wan, J., Li, D., and Zhang, C., “Implementing Smart Factory of Industrie 4.0: An Outlook,” International Journal of Distributed Sensor Networks, Article ID: 681806, 2015.

    Google Scholar 

  8. Anderl, I. R., “Industrie 4.0-Advanced Engineering of Smart Products and Smart Production,” Proc. of 19th International Seminar on High Technology, 2014.

    Google Scholar 

  9. Brettel, M., Friederichsen, N., Keller, M., and Rosenberg, M., “How Virtualization, Decentralization and Network Building Change the Manufacturing Landscape: An Industry 4.0 Perspective,” International Journal of Science, Engineering and Technology, Vol. 8, No. 1, pp. 37–44, 2014.

    Google Scholar 

  10. Choi, S., Jun, C., Zhao, W. B., and Noh, S. D., “Digital Manufacturing in Smart Manufacturing Systems: Contribution, Barriers, and Future Directions,” Advances in production Management Systems: Innovative Production Management towards Sustainable Growth, pp. 21–29, 2015.

    Chapter  Google Scholar 

  11. Radziwon, A., Bilberg, A., Bogers, M., and Madsen, E. S., “The Smart Factory: Exploring Adaptive and Flexible Manufacturing Solutions,” Procedia Engineering, Vol. 69, pp. 1184–1190, 2014.

    Article  Google Scholar 

  12. Lucke, D., Constantinescu, C., and Westkämper, E., “Smart Factory: A Step towards the Next Generation of Manufacturing,” Manufacturing Systems and Technologies for the New Frontier, pp. 115–118, 2008.

    Chapter  Google Scholar 

  13. Zuehlke, D., “Smartfactory-towards a Factory-of-Things,” Annual Reviews in Control, Vol. 34, No. 1, pp. 129–138, 2010.

    Article  Google Scholar 

  14. Ivanov, D., Dolgui, A., Sokolov, B., Werner, F., and Ivanova, M., “A Dynamic Model and an Algorithm for Short-Term Supply Chain Scheduling in the Smart Factory Industry 4.0,” International Journal of Production Research, DOI No. 10.1080/00207543.2014.999958, 2015.

    Google Scholar 

  15. Choi, S., Kim, B. H., and Noh, S. D., “A Diagnosis and Evaluation Method for Strategic Planning and Systematic Design of a Virtual Factory in Smart Manufacturing Systems,” Int. J. Precis. Eng. Manuf., Vol. 16, No. 6, pp. 1107–1115, 2015.

    Article  Google Scholar 

  16. Hellinger, A. and Seeger, H., “Cyber-Physical Systems. Driving Force for Innovation in Mobility, Health, Energy and Production,” Acatech Position Paper, National Academy of Science and Engineering, 2011.

    Google Scholar 

  17. Geisberger, E. and Broy, M., “Integrierte Forschungsagenda Cyber-Physical Systems,” Acatech Position Paper, National Academy of Science and Engineering, 2012.

    Google Scholar 

  18. Sztipanovits, J., Ying, S., Cohen, I., Corman, D., Davis, J., et al., “Strategic R&D Opportunities for 21st Century Cyber-Physical Systems,” Technical Report for Steering Committee for Foundation in Innovation for Cyber-Physical Systems: Chicago, 2013.

    Google Scholar 

  19. Lee, J., Bagheri, B., and Kao, H.-A., “A Cyber-Physical Systems Architecture for Industry 4.0-Based Manufacturing Systems,” Manufacturing Letters, Vol. 3, pp. 18–23, 2015.

    Article  Google Scholar 

  20. Dworschak, B. and Zaiser, H., “Competences for Cyber-Physical Systems in Manufacturing-First Findings and Scenarios,” Procedia CIRP, Vol. 25, pp. 345–350, 2014.

    Article  Google Scholar 

  21. Seiger, R., Keller, C., Niebling, F., and Schlegel, T., “Modelling Complex and Flexible Processes for Smart Cyber-Physical Environments,” Journal of Computational Science, Vol. 10, pp. 137–148, 2014.

    Article  Google Scholar 

  22. Monostori, L., “Cyber-Physical Production Systems: Roots, Expectations and R&D Challenges,” Procedia CIRP, Vol. 17, pp. 9–13, 2014.

    Article  Google Scholar 

  23. Genge, B., Fovino, I. N., Siaterlis, C., and Masera, M., “Analyzing Cyber-Physical Attacks on Networked Industrial Control Systems,” Critical Infrastructure Protection V, pp. 167–183, 2011.

    Chapter  Google Scholar 

  24. Wang, Y., Vuran, M. C., and Goddard, S., “Cyber-Physical Systems in Industrial Process Control,” ACM Sigbed Review, Vol. 5, No. 1, Article No. 12, 2008.

    Google Scholar 

  25. Niggemann, O., Biswas, G., Kinnebrew, J. S., Khorasgani, H., Volgmann, S., et al., “Data-Driven Monitoring of Cyber-Physical Systems Leveraging on Big Data and the Internet-of-Things for Diagnosis and Control,” http://ceur-wsorg/Vol-1507/dx15paper24pdf (Accessed 30 December 2015)

    Google Scholar 

  26. Lee, J., Bagheri, B., and Kao, H.-A., “Recent Advances and Trends of Cyber-Physical Systems and Big Data Analytics in Industrial Informatics,” Proc. of International Conference on Industrial Informatics, 2014.

    Google Scholar 

  27. Wan, J., Chen, M., Xia, F., Di, L., and Zhou, K., “From Machine-to-Machine Communications towards Cyber-Physical Systems,” Computer Science and Information Systems, Vol. 10, No. 3, pp. 1105–1128, 2013.

    Article  Google Scholar 

  28. Lu, T., Zhao, J., Zhao, L., Li, Y., and Zhang, X., “Towards a Framework for Assuring Cyber Physical System Security,” International Journal of Security&Its Applications, Vol. 9, No. 3, pp. 25–40, 2015.

    Article  Google Scholar 

  29. Colombo, A. W., Karnouskos, S., and Bangemann, T., “Towards the Next Generation of Industrial Cyber-Physical Systems,” Industrial Cloud-Based Cyber-Physical Systems, pp. 1–22, 2014.

    Chapter  Google Scholar 

  30. Colombo, A. W., Bangemann, T., Karnouskos, S., Delsing, J., Stluka, P., et al., “Industrial Cloud-Based Cyber-Physical Systems,” The IMC-AESOP Approach, 2014.

    Google Scholar 

  31. Wu, D., Greer, M. J., Rosen, D. W., and Schaefer, D., “Cloud Manufacturing: Drivers, Current Status, and Future Trends,” Proc. of ASME 2013 International Manufacturing Science and Engineering Conference Collocated with the 41st North American Manufacturing Research Conference, Paper No. V002T002A003, 2013.

    Google Scholar 

  32. Wu, D., Greer, M. J., Rosen, D. W., and Schaefer, D., “Cloud Manufacturing: Strategic Vision and State-of-the-Art,” Journal of Manufacturing Systems, Vol. 32, No. 4, pp. 564–579, 2013.

    Article  Google Scholar 

  33. Wu, D., Rosen, D. W., Wang, L., and Schaefer, D., “Cloud-Based Design and Manufacturing: A New Paradigm in Digital Manufacturing and Design Innovation,” Computer-Aided Design, Vol. 59, pp. 1–14, 2015.

    Article  Google Scholar 

  34. Ren, L., Zhang, L., Wang, L., Tao, F., and Chai, X., “Cloud Manufacturing: Key Characteristics and Applications,” International Journal of Computer Integrated Manufacturing, DOI No. 10.1080/0951192X.2014.902105, 2014.

    Google Scholar 

  35. Ren, L., Zhang, L., Tao, F., Zhao, C., Chai, X., et al., “Cloud Manufacturing: From Concept to Practice,” Enterprise Information Systems, Vol. 9, No. 2, pp. 186–209, 2015.

    Article  Google Scholar 

  36. Wu, D., Rosen, D. W., and Schaefer, D., “Cloud-Based Design and Manufacturing: Status and Promise,” Cloud-Based Design and Manufacturing (CBDM), pp. 1–24, 2014.

    Google Scholar 

  37. Wu, D., Rosen, D. W., Wang, L., and Schaefer, D., “Cloud-Based Manufacturing: Old Wine in New Bottles?” Procedia CIRP, Vol. 17, pp. 94–99, 2014.

    Article  Google Scholar 

  38. Zhang, L., Luo, Y., Tao, F., Li, B. H., Ren, L., et al., “Cloud Manufacturing: A New Manufacturing Paradigm,” Enterprise Information Systems, Vol. 8, No. 2, pp. 167–187, 2014.

    Article  Google Scholar 

  39. Tao, F., Cheng, Y., Da Xu, L., Zhang, L., and Li, B. H., “CCIoTCMfg: Cloud Computing and Internet of Things-Based Cloud Manufacturing Service System,” IEEE Transactions on Industrial Informatics, Vol. 10, No. 2, pp. 1435–1442, 2014.

    Article  Google Scholar 

  40. Karnouskos, S., Colombo, A. W., Bangemann, T., Manninen, K., Camp, R., et al., “A SOA-Based Architecture for Empowering Future Collaborative Cloud-Based Industrial Automation,” Proc. of IECON 2012–38th Annual Conference on IEEE Industrial Electronics Society, pp. 5766–5772, 2012.

    Chapter  Google Scholar 

  41. He, W. and Xu, L., “A State-of-the-Art Survey of Cloud Manufacturing,” International Journal of Computer Integrated Manufacturing, Vol. 28, No. 3, pp. 239–250, 2015.

    Article  Google Scholar 

  42. Luo, Y., Zhang, L., Tao, F., Ren, L., Liu, Y., et al., “A Modeling and Description Method of Multidimensional Information for Manufacturing Capability in Cloud Manufacturing System,” The International Journal of Advanced Manufacturing Technology, Vol. 69, No. 5–8, pp. 961–975, 2013.

    Article  Google Scholar 

  43. Laili, Y., Tao, F., Zhang, L., and Sarker, B. R., “A Study of Optimal Allocation of Computing Resources in Cloud Manufacturing Systems,” The International Journal of Advanced Manufacturing Technology, Vol. 63, No. 5–8, pp. 671–690, 2012.

    Article  Google Scholar 

  44. Wang, L., “Machine Availability Monitoring and Machining Process Planning towards Cloud Manufacturing,” CIRP Journal of Manufacturing Science and Technology, Vol. 6, No. 4, pp. 263–273, 2013.

    Article  Google Scholar 

  45. Wang, T., Guo, S., and Lee, C.-G., “Manufacturing Task Semantic Modeling and Description in Cloud Manufacturing System,” The International Journal of Advanced Manufacturing Technology, Vol. 71, No. 9–12, pp. 2017–2031, 2014.

    Article  Google Scholar 

  46. Pisching, M. A., Junqueira, F., Santos Filho, D. J., and Miyagi, P. E., “Service Composition in the Cloud-Based Manufacturing Focused on the Industry 4.0,” Technological Innovation for Cloud-Based Engineering Systems, pp. 65–72, 2015.

    Google Scholar 

  47. Lee, J., Kao, H.-A., and Yang, S., “Service Innovation and Smart Analytics for Industry 4.0 and Big Data Environment,” Procedia CIRP, Vol. 16, pp. 3–8, 2014.

    Article  Google Scholar 

  48. Lee, J., Lapira, E., Bagheri, B., and Kao, H.-A., “Recent Advances and Trends in Predictive Manufacturing Systems in Big Data Environment,” Manufacturing Letters, Vol. 1, No. 1, pp. 38–41, 2013.

    Article  Google Scholar 

  49. Shahbaz, M., Masood, S. A., Shaheen, M., and Khan, A., “Data Mining Methodology in Perspective of Manufacturing Databases,” Life Science Journal, Vol. 9, No. 3, pp. 13–22, 2012.

    Google Scholar 

  50. Shao, G., Brodsky, A., Shin, S.-J., and Kim, D. B., “Decision Guidance Methodology for Sustainable Manufacturing Using Process Analytics Formalism,” Journal of Intelligent Manufacturing, pp. 1–18, 2014.

    Google Scholar 

  51. Ündey, C., Ertunç, S., Mistretta, T., and Looze, B., “Applied Advanced Process Analytics in Biopharmaceutical Manufacturing: Challenges and Prospects in Real-Time Monitoring and Control,” Journal of Process Control, Vol. 20, No. 9, pp. 1009–1018, 2010.

    Article  Google Scholar 

  52. Meidan, Y., Lerner, B., Rabinowitz, G., and Hassoun, M., “Cycle-Time Key Factor Identification and Prediction in Semiconductor Manufacturing Using Machine Learning and Data Mining,” IEEE Transactions on Semiconductor Manufacturing, Vol. 24, No. 2, pp. 237–248, 2011.

    Article  Google Scholar 

  53. Bagchi, S., Baseman, R. J., Davenport, A., Natarajan, R., Slonim, N., et al., “Data Analytics and Stochastic Modeling in a Semiconductor Fab,” Applied Stochastic Models in Business and Industry, Vol. 26, No. 1, pp. 1–27, 2010.

    Article  MathSciNet  MATH  Google Scholar 

  54. Gröger, C., Niedermann, F., and Mitschang, B., “Data Mining-Driven Manufacturing Process Optimization,” Proc. of the World Congress on Engineering, Vol. 3, pp. 4–6, 2012.

    Google Scholar 

  55. Çiflikli, C. and Kahya-Özyirmidokuz, E., “Implementing a Data Mining Solution for Enhancing Carpet Manufacturing Productivity,” Knowledge-Based Systems, Vol. 23, No. 8, pp. 783–788, 2010.

    Article  Google Scholar 

  56. Shin, S.-J., Woo, J., and Rachuri, S., “Predictive Analytics Model for Power Consumption in Manufacturing,” Procedia CIRP, Vol. 15, pp. 153–158, 2014.

    Article  Google Scholar 

  57. Zhong, R. Y., Lan, S., Xu, C., Dai, Q., and Huang, G. Q., “Visualization of RFID-Enabled Shopfloor Logistics Big Data in Cloud Manufacturing,” The International Journal of Advanced Manufacturing Technology, pp. 1–12, 2015.

    Google Scholar 

  58. ITU, “Internet of Things Global Standards Initiative,” http:// wwwituint/en/ITU-T/gsi/iot/Pages/defaultaspx (Accessed 20 December 2015)

    Google Scholar 

  59. Williams, J., “Harvard Business Review Internet of Things: Science Fiction or Business Fact (Report and Resources),” Verizon, 2014.

    Google Scholar 

  60. Vermesan, O. and Friess, P., “Internet of Things: Converging Technologies for Smart Environments and Integrated Ecosystems,” River Publishers, 2013.

    Google Scholar 

  61. Lopez Research LLC, “An Introduction to the Internet of Things(IoT),” https://wwwciscocom/web/solutions/trends/iot/ introduction_to_IoT_novemberpdf (Accessed 20 December 2015)

    Google Scholar 

  62. Gérald, S., “The Internet of Things: Between the Revolution of the Internet and the Metamorphosis of Objects,” http://cordiseuropaeu/ fp7/ict/enet/documents/publications/iot-between-the-internetrevolution. pdf (Accessed 20 December 2015)

    Google Scholar 

  63. Mattern, F. and Floerkemeier, C., “From the Internet of Computers to the Internet of Things,” From Active Data Management to Event-Based Systems and More, pp. 242–259, 2010.

    Chapter  Google Scholar 

  64. Cognizant, “Reaping the Benefits of the Internet of Things,” http:// wwwcognizantcom/InsightsWhitepapers/Reaping-the-Benefits-ofthe-Internet-of-Thingspdf (Accessed 20 December 2015)

    Google Scholar 

  65. Löffler, M. and Tschiesner, A., “The Internet of Things and the Future of Manufacturing,” http://wwwfuturenauticscom/wpcontent/ uploads/2013/10/Internet-of-Things-and-future-ofmanufacturing. pdf (Accessed 20 December 2015)

    Google Scholar 

  66. Da Xu, L., He, W., and Li, S., “Internet of Things in Industries: A Survey,” IEEE Transactions on Industrial Informatics, Vol. 10, No. 4, pp. 2233–2243, 2014.

    Article  Google Scholar 

  67. Bi, Z., Da Xu, L., and Wang, C., “Internet of Things for Enterprise Systems of Modern Manufacturing,” IEEE Transactions on Industrial Informatics, Vol. 10, No. 2, pp. 1537–1546, 2014.

    Article  Google Scholar 

  68. Dias, R. A., Mendonça, I. T., and Regis, A., “Integrated Manufacturing Management Using Internet of Things,” International Journal of Computer Applications, Vol. 51, No. 11, pp. 20–25, 2012.

    Article  Google Scholar 

  69. Guinard, D., Trifa, V., Karnouskos, S., Spiess, P., and Savio, D., “Interacting with the Soa-Based Internet of Things: Discovery, Query, Selection, and On-Demand Provisioning of Web Services,” IEEE Transactions on Services Computing, Vol. 3, No. 3, pp. 223–235, 2010.

    Article  Google Scholar 

  70. Tao, F., Zuo, Y., Da Xu, L., and Zhang, L., “IoT-Based Intelligent Perception and Access of Manufacturing Resource toward Cloud Manufacturing,” IEEE Transactions on Industrial Informatics, Vol. 10, No. 2, pp. 1547–1557, 2014.

    Article  Google Scholar 

  71. Zhang, Y., Zhang, G., Wang, J., Sun, S., Si, S., et al., “Real-Time Information Capturing and Integration Framework of the Internet of Manufacturing Things,” International Journal of Computer Integrated Manufacturing, DOI No. 10.1080/0951192X.2014. 900874, 2014.

    Google Scholar 

  72. Butala, P., Vrabiè, R., and Oosthuizen, G., “Distributed Manufacturing Systems and the Internet of Things: A Case Study,” https://ujdigispaceujacza/bitstream/handle/10210/13015/565–2012-1-PBpdf?sequence=1&isAllowed=y (Accessed 20 December 2015)

    Google Scholar 

  73. Chris, T. and Steven, A., “Wireless Sensor Networks: Principles and Applications,” Retrieved, 2011.

    Google Scholar 

  74. Zhuang, L., Goh, K. M., and Zhang, J.-B., “The Wireless Sensor Networks for Factory Automation: Issues and Challenges,” Proc. of IEEE Conference on Emerging Technologies and Factory Automation, pp. 141–148, 2007.

    Google Scholar 

  75. Flammini, A., Ferrari, P., Marioli, D., Sisinni, E., and Taroni, A., “Wired and Wireless Sensor Networks for Industrial Applications,” Microelectronics Journal, Vol. 40, No. 9, pp. 1322–1336, 2009.

    Article  Google Scholar 

  76. Chi, Q., Yan, H., Zhang, C., Pang, Z., and Da Xu, L., “A Reconfigurable Smart Sensor Interface for Industrial WSN in IoT Environment,” IEEE Transactions on Industrial Informatics, Vol. 10, No. 2, pp. 1417–1425, 2014.

    Article  Google Scholar 

  77. Zhang, Y., Qu, T., Ho, O. K., and Huang, G. Q., “Agent-Based Smart Gateway for RFID-Enabled Real-Time Wireless Manufacturing,” International Journal of Production Research, Vol. 49, No. 5, pp. 1337–1352, 2011.

    Article  Google Scholar 

  78. Zhang, Y., Huang, G. Q., Qu, T., Ho, O., and Sun, S., “Agent-Based Smart Objects Management System for Real-Time Ubiquitous Manufacturing,” Robotics and Computer-Integrated Manufacturing, Vol. 27, No. 3, pp. 538–549, 2011.

    Article  Google Scholar 

  79. Lee, S. C., Jeon, T. G., Hwang, H.-S., and Kim, C.-S., “Design and Implementation of Wireless Sensor Based-Monitoring System for Smart Factory,” Computational Science and Its Applications-ICCSA 2007, pp. 584–592, 2007.

    Chapter  Google Scholar 

  80. Wright, P., Dornfeld, D., and Ota, N., “Condition Monitoring in End-Milling Using Wireless Sensor Networks (WSNS),” Transactions of NAMRI/SME, Vol. 36, pp. 177–183, 2008.

    Google Scholar 

  81. Kortuem, G., Alford, D., Ball, L., Busby, J., Davies, N., et al., “Sensor Networks or Smart Artifacts? An Exploration of Organizational Issues of an Industrial Health and Safety Monitoring System,” Springer, pp. 465–482, 2007.

    Google Scholar 

  82. Pal, D., Patil, N., Nikoukar, M., Zeng, K., Kutty, K. H., et al., “An Integrated Approach to Cyber-Enabled Additive Manufacturing using Physics Based, Coupled Multi-Scale Process Modeling,” Proc. of SFF Symposium, pp. 12–14, 2013.

    Google Scholar 

  83. Campbell, I., Bourell, D., and Gibson, I., “Additive Manufacturing: Rapid Prototyping Comes of Age,” Rapid Prototyping Journal, Vol. 18, No. 4, pp. 255–258, 2012.

    Article  Google Scholar 

  84. Huang, Y. and Leu, M. C., “Frontiers of Additive Manufacturing Research and Education,” http://plazaufledu/yongh/2013NSFAM WorkshopReportpdf (Accessed 20 December 2015)

    Google Scholar 

  85. Wong, K. V. and Hernandez, A., “A Review of Additive Manufacturing,” ISRN Mechanical Engineering, Vol. 2012, Article ID: 208760, 2012.

  86. Huang, S. H., Liu, P., Mokasdar, A., and Hou, L., “Additive Manufacturing and Its Societal Impact: A Literature Review,” The International Journal of Advanced Manufacturing Technology, Vol. 67, No. 5–8, pp. 1191–1203, 2013.

    Article  Google Scholar 

  87. Berman, B., “3-D Printing: The New Industrial Revolution,” Business Horizons, Vol. 55, No. 2, pp. 155–162, 2012.

    Article  Google Scholar 

  88. Espalin, D., Muse, D. W., MacDonald, E., and Wicker, R. B., “3D Printing Multifunctionality: Structures with Electronics,” The International Journal of Advanced Manufacturing Technology, Vol. 72, No. 5–8, pp. 963–978, 2014.

    Article  Google Scholar 

  89. Kerbrat, O., Mognol, P., and Hascoët, J.-Y., “A New DFM Approach to Combine Machining and Additive Manufacturing,” Computers in Industry, Vol. 62, No. 7, pp. 684–692, 2011.

    Article  Google Scholar 

  90. Witherell, P., Feng, S., Simpson, T. W., Saint John, D. B., Michaleris, P., et al., “Toward Metamodels for Composable and Reusable Additive Manufacturing Process Models,” Journal of Manufacturing Science and Engineering, Vol. 136, Paper No. MANU-14–1275, 2014.

    Article  Google Scholar 

  91. Lu, Y., Choi, S., and Witherell, P., “Towards an Integrated Data Schema Design for Additive Manufacturing: Conceptual Modeling,” Proc. of the ASME International Design Engineering Technical Conferences&Computers and Information in Engineering Conference, 2015.

    Google Scholar 

  92. Seow, Y. and Rahimifard, S., “A Framework for Modelling Energy Consumption within Manufacturing Systems,” CIRP Journal of Manufacturing Science and Technology, Vol. 4, No. 3, pp. 258–264, 2011.

    Article  Google Scholar 

  93. Vijayaraghavan, A. and Dornfeld, D., “Automated Energy Monitoring of Machine Tools,” CIRP Annals-Manufacturing Technology, Vol. 59, No. 1, pp. 21–24, 2010.

    Article  Google Scholar 

  94. Duflou, J. R., Sutherland, J. W., Dornfeld, D., Herrmann, C., Jeswiet, J., et al., “Towards Energy and Resource Efficient Manufacturing: A Processes and Systems Approach,” CIRP Annals-Manufacturing Technology, Vol. 61, No. 2, pp. 587–609, 2012.

    Article  Google Scholar 

  95. Herrmann, C., Thiede, S., Kara, S., and Hesselbach, J., “Energy Oriented Simulation of Manufacturing Systems-Concept and Application,” CIRP Annals-Manufacturing Technology, Vol. 60, No. 1, pp. 45–48, 2011.

    Article  Google Scholar 

  96. Rahimifard, S., Seow, Y., and Childs, T., “Minimising Embodied Product Energy to Support Energy Efficient Manufacturing,” CIRP Annals-Manufacturing Technology, Vol. 59, No. 1, pp. 25–28, 2010.

    Article  Google Scholar 

  97. Herrmann, C. and Thiede, S., “Process Chain Simulation to Foster Energy Efficiency in Manufacturing,” CIRP Journal of Manufacturing Science and Technology, Vol. 1, No. 4, pp. 221–229, 2009.

    Article  Google Scholar 

  98. Weinert, N., Chiotellis, S., and Seliger, G., “Methodology for Planning and Operating Energy-Efficient Production Systems,” CIRP Annals-Manufacturing Technology, Vol. 60, No. 1, pp. 41–44, 2011.

    Article  Google Scholar 

  99. Mouzon, G., Yildirim, M. B., and Twomey, J., “Operational Methods for Minimization of Energy Consumption of Manufacturing Equipment,” International Journal of Production Research, Vol. 45, No. 18–19, pp. 4247–4271, 2007.

    Article  MATH  Google Scholar 

  100. Katsutomo, T., Hiroshi, W., and Akira, E., “Enerize E3 Factory Energy Management System,” Yokogawa Technical Report English Edition, Vol. 53, No. 1, pp. 23–26, 2010.

    Google Scholar 

  101. Endo, M., Nakajima, H., and Hata, Y., “Simplified Factory Energy Management System Based on Operational Condition Estimation by Sensor Data,” Proc. of IEEE International Conference on Automation Science and Engineering (CASE), pp. 14–19, 2012.

    Google Scholar 

  102. Hetzler, J., Beder, S., and Feldmann, H., “Hologram and Method of Manufacturing an Optical Element Using a Hologram,” US Patent, No. 7848031 B2, 2010.

    Google Scholar 

  103. Schillke, F., Beder, S., and Hetzler, J., “Method of Manufacturing an Optical Element using a Hologram,” US Patent, No. 7061626 B1, 2006.

    Google Scholar 

  104. Nee, A. Y. C., Ong, S. K., Chryssolouris, G., and Mourtzis, D., “Augmented Reality Applications in Design and Manufacturing,” CIRP Annals-Manufacturing Technology, Vol. 61, No. 2, pp. 657–679, 2012.

    Article  Google Scholar 

  105. Smart Manufacturing Leadership Coalition, “SMLC Forum: Priorities, Infrastructure, and Collaboration for Implementation of Smart Manufacturing,” https://smartmanufacturingcoalitionorg/sites/ default/files/smlc_forum_report_vf_0pdf (Accessed 20 December 2015)

    Google Scholar 

Download references

Author information

Authors and Affiliations

  1. Department of Systems Management Engineering, Sungkyunkwan University, 2066, Seobu-ro, Jangan-gu, Suwon-si, Gyeonggi-do, 16419, South Korea

    Hyoung Seok Kang, SangSu Choi & Sang Do Noh

  2. IT Converged Process R&D Group, Korea Institute of Industrial Technology, 55, Hanyangdaehak-ro, Sangnok-gu, Ansan-si, Gyeonggi-do, 15588, South Korea

    Ju Yeon Lee & Bo Hyun Kim

  3. Smart Green Life Research Department, Electronics and Telecommunications Research Institute, 218 Gajeong-ro, Yuseong-gu, Daejeon, 34129, South Korea

    Hyun Kim, Jun Hee Park & Ji Yeon Son

Authors
  1. Hyoung Seok Kang
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Ju Yeon Lee
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. SangSu Choi
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Hyun Kim
    View author publications

    You can also search for this author in PubMed Google Scholar

  5. Jun Hee Park
    View author publications

    You can also search for this author in PubMed Google Scholar

  6. Ji Yeon Son
    View author publications

    You can also search for this author in PubMed Google Scholar

  7. Bo Hyun Kim
    View author publications

    You can also search for this author in PubMed Google Scholar

  8. Sang Do Noh
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Sang Do Noh.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Kang, H.S., Lee, J.Y., Choi, S. et al. Smart manufacturing: Past research, present findings, and future directions. Int. J. of Precis. Eng. and Manuf.-Green Tech. 3, 111–128 (2016). https://doi.org/10.1007/s40684-016-0015-5

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s40684-016-0015-5

Keywords

Search

Navigation