Abstract
The structural, electrical and optical properties of chalcogenide thin films deposited by chemical bath deposition are studied as a function of the pH value of the chemical bath. The orthorhombic polycrystalline structures thin films with preferred orientation along (201) are determined by the x-ray diffraction technique (XRD). The surface morphology of the thin films is determined using a scanning electron microscope (SEM). Measurements of electrical were carried out using a Hall Effect measurement. According to this measurement data, the mobility increases from 98.4 to 670.9 (cm2/V·s). To determine optical properties of the thin films, UV-vis spectrometer was used. We determined that the optical band gap (Eg) of the film gradually decreases from 2.22 to 1.95 eV with increase in the pH value of the chemical bath. Additionally, the refractive index and extinction coefficient of the thin films were calculated using these data.
Similar content being viewed by others
References
P. Liu, V. Singh, C. Jarro, and S. Rajaputra, Nanotechnology 22, 145304 (2011).
D. Lu, B. Sang, Y. Deng, B. J. Stanbery, and L. Eldada, Proc. IEEE International Electron Devices Meeting, p. 175, IEEE Inst. Elec. Electron. Eng. Inc., San Francisco, USA (2010).
Y. Lim, J. Choi, and T. Hanrath, J. Nanomaterials 393160, 1 (2012).
S. V. Novikov, C. R. Staddon, C. T. Foxon, K. M. Yu, R. Broesler, M. Hawkridge, Z. Liliental-Weber, J. Denlinger, I. Demchenko, F. Luckert, P. R. Edwards, R. W. Martin, and W. Walukiewicz, J. Cryst. Growth 323, 60 (2011).
H. M. Abdelmoneim, Physica B 405, 1551 (2010).
F. Charpentier, M. Dussauze, M. Cathelinaud, G. Delaizir, E. I. Kamitsos, J. L. Adam, B. Bureau, and V. Nazabal, J. Alloys Compd. 509, 7330 (2011).
A. A. Al-Ghamdi, Shamshad A. Khan, S. Al-Heniti, F. A. Al-Agel, and M. Zulfequar, Curr. Appl. Phys. 11, 315 (2011).
T. Petkova, C. Popov, T. Hineva, P. Petkov, G. Socol, E. Axente, C. N. Mihailescu, I. N. Mihailescud, and J. P. Reithmaier, Appl. Surf. Sci. 255, 5318 (2009).
P. L. Musetha, N. Revaprasadu, G. A. Kolawole, Rajasekhar V. S. R. Pullabhotla, K. Ramasamy, and P. O’Brien, Thin Solid Films 519, 197 (2010).
T. Kohoutek, T. Wagner, J. Orava, M. Krbal, A. Fejfar, T. Mates, S. O. Kasap, and M. Frumar, J. Non-Cryst. Solids 353, 1437 (2007).
M. Alvi, A. Khan, and A. Al-Ghamdi, Mater. Lett. 66, 273 (2012).
S. K. Mukherjee and P. K. Barhai, J. Alloys Compd. 511, 14 (2012).
S. A. Mahmoud, S. Alshomeri, and M. A. Tarawnh, Journal of Modern Phys. 2, 1178 (2011).
C. Tsaya, K. Fana, and C. Lei, J. Alloys Compd. 512, 216 (2012).
H. Ye, H. S. Park, V. A. Akhavan, B. W. Goodfellow, M. G. Panthani, B. A. Korgel, and A. J. Bard, J. Phys. Chem. C 115, 234 (2011).
G. Bakiyaraj, N. Gopalakrishnan, and R. Dhanasekaran, Chalcogenide Lett. 8, 419 (2011).
T. Shyju, S. Anandhi, R. Indirajith, and R. Gopalakrishnan, J. Alloys Compd. 506, 892 (2010).
D. K. Dwivedi, Dayashankar, B. B. Singh, and Maheshwar Dubey, J. Non-Cryst. Solids 356, 1563 (2010).
A. H. Ammar, N. M. Abdel-Moniem, A. A. M. Farag, and El-Sayed M. Farag, Phys. B 407, 356 (2012).
F. Gode, Phys. B 406, 1653 (2011).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Güneri, E., Kariper, A. Characterization of high quality chalcogenide thin film fabricated by chemical bath deposition. Electron. Mater. Lett. 9, 13–17 (2013). https://doi.org/10.1007/s13391-012-2099-6
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s13391-012-2099-6