Abstract
The influence of surface topography on microbial adhesion is an important regulatory issue. In this study, we use the potential adhesion of conidia from Penicillium expansum to cedar wood as a theoretical model to understand the effect of a roughness on physico-chemical attributes of spores, and their potential adhesive properties. The effect of roughness level ranging from 1.83 to 0.45 μm was investigated. Hydrophobicity, electron donor and acceptor character of the substrates was determined using contact angle measurements. Spore behavior switched from hydrophobic (99.2°), at an Ra value of 1.83 μm, to hydrophilic (60.02°), at an Ra value of 0.45 μm. It was difficult to find a relationship between the acid–base component of wood substrate and surface roughness over the range of Ra values tested. Prediction of the attachment tendencies of Penicillium expansum, was modeled using wood surfaces with different degrees of roughness according to the XDLVO approach. Maximum adhesion was predicted to occur at an Ra value of 1.83 μm. However, for Ra values less than 0.75 μm, the value of total interaction energy ranged from +4.17 mJ/m2 (Ra = 0.6 μm) to +6.58 mJ/m2 (Ra = 0.45 μm).
Similar content being viewed by others
References
Abdelsalam ME, Bartlett PN, Kelf T, Baumberg J (2005) Wetting of regularly structured gold surfaces. Langmuir 21:1753–1757
Absolom DR, Lamberti FV, Policova Z, Zingg W, Van Oss CJ, Neumann AW (1983) Surface thermodynamics of bacterial adhesion. Appl Environ Microbiol 46:90–97
Bengourram J, Hamadi F, Mabrouki M, Kouider N, Zekraoui M, Ellouali M, Latrache H (2009) Relationship between roughness and physico-chemical properties of glass surface and theoretical adhesion of bacterial cells. Phys Chem News 47:138–144
Blanco MT, Blanco J, Sanchez-Benito R, Perez-Giraldo C, Moran FJ, Hurtado C, Gomez-Garcia AC (1997) Incubation temperatures affect adherence to plastic of Candida albicans by changing the cellular surface hydrophobicity. Microbios 89:23–28
Bollen CML, Papaioannou W, Van Eldere J, Schepers E, Quirynen M, van Steenberghe D (1996) The influence of abutment surface roughness on plaque accumulation and peri-implant mucositis. Clin Oral Implants Res 7:201–211
El abed S, Hamadi F, Latrache H, Haggoud A, Ibnsouda KS (2010a) Quantification of Bacillus subtilis and Bacillus sp. adhesion on cedar wood. J Adhesion Sci Technol (in press)
El abed S, Hamadi F, Latrache H, Iraqui MH, Ibnsouda KS (2010b) Adhesion of Aspergillus niger and Penicillium expansum spores on Fez cedar wood substrata. Ann Microbiol 60:377–382
El abed S, Mostakim M, Berguadi F, Latrache H, Houari A, Hamadi F, Ibnsouda KS (2011) Study of microbial adhesion on some wood species: theoretical prediction. Microbiology 80:43–49
Flint SH, Scholtz W, Kells NJ, Wiles PJ (1996) Evaluation of the development of biofilms on different welded surfaces. In: Scholz W (ed) Proceedings of the Asia Pacific welding conference, Auckland, New Zealand
Flint SH, Brooks JD, Bremer PJJ (1997) Biofilms in dairy manufacturing plant-description, current concerns and methods of control. Biofouling 11:81–97
Flint SH, Brooks JD, Bremer PJ (2000) Properties of the stainless steel substrate, influencing the adhesion of thermo-resistant streptococci. J Food Eng 43:235–242
Gallardo-Moreno AM, Gonzalez-Martin ML, Perez-Giraldo C, Bruque JM, Gomez-Garcia AC (2003) The measurement temperature: an important factor relating physico-chemical and adhesive properties of yeast cells to biomaterials. J Colloid Interface Sci 272:351–358
Hoffman W (1983) CIP of straight pipes as a function of surface roughness and other factors. Dissertation Doktorgrades, Christian-Albrechts-Universitat, Keil
Kouider N, Hamadi F, Mallouki B, Bengourram J, Mabrouki M, Zekraoui M, Ellouali M, Latrache H (2010) Effect of stainless steel surface roughness on Staphylococcus aureus adhesion. Int Jor P App Scs 4:1–7
Langeveld LPM, Bolle AC, Vegter JE (1972) The cleanability of stainless steel with different degrees of surface roughness. Neth Milk Dairy J 26:149–154
Leclercq-Perlat MN, Lalande M (1994) Cleanability in relation to surface chemical composition and surface fnishing of some materials commonly used in food industries. J Food Eng 23:501–517
Mafu AA, Roy D, Goulet J, Magny P (1990) Attachment of Listeria monocytogenes to stainless steel, glass, polypropylene and rubber surfaces after short contact times. J Food Protect 53:742–746
Masurovsky EB, Jordan WK (1958) Studies on the relative bacterial cleanability of milk contact surfaces. J Dairy Sci 41:1342–1358
Pedersen K (1990) Biofilm development of stainless steel and PVC surfaces in drinking water. Water Res 24:239–243
Quirynen M, Marechal M, Busscher HJ, Weerkamp AH, Darius PL, van Steenberghe D (1990) The influence of surface free-energy and surface roughness on early plaque formation. An in vivo study in man. J Clin Periodontol 17:138–144
Quirynen M, Papaioannou W, van Steenbergh D (1996) Intra-oral transmission and the colonization of oral hard surfaces. J Periodontol 67:986–993
Riijinart HHM, Norde W, Lyklema J, Zehnder AJB (1999) DLVO and steric contributions to bacterial deposition in media of different ionic strengths. Colloids Surf B 14:179–195
Scheuerman TR, Camper AK, Hamilton MA (1998) Effects of substratum topography on bacterial adhesion. J Colloid Interf Sci 208:23–33
Swaffield CH, Scott JA, Jarvis B (1997) Observations on the microbial ecology of traditional alcoholic cider storage vats. Food Microbiol 14:353–361
Van Oss CJ (1996) Interfacial forces in aqueous media. Dekker, New York
Vanhaecke E, Remon J-P, Moors M, Raes F, de Rudder D, van Peteghem A (1990) Kinetics of Pseudomonas aeruginosa adhesion to 304 and 316-L stainless steel: role of cell surface hydrophobicity. Appl Environ Microb 56:788–795
Vogler EA (1998) Structure and reactivity of water at biomaterial surfaces. Adv Colloid Interface Sci 74:69–117
Whitehead KA, Rogers D, Colligon J, Wright C, Verran J (2006) Use of the atomic force microscope to determine the effect of substratum surface topography on the ease of bacterial removal. Colloid Surface B 51:44–53
Wirtanen G, Ahola H, Mattila-Sandholm T (1995) Evaluation of cleaning procedures in elimination of bioflm from stainless steel surfaces in open process equipment. Trans Int Chem Eng 73:1–9
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
El abed, S., Ibnsouda, K.S., Latrache, H. et al. Theoretical effect of cedar wood surface roughness on the adhesion of conidia from Penicillium expansum . Ann Microbiol 62, 1361–1366 (2012). https://doi.org/10.1007/s13213-011-0384-5
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s13213-011-0384-5