Abstract
The mechanical compatibility between the dentin and any restorative dental material plays is an important factor in selecting dental restorative materials. In this work we characterize the elastic constants of dentin by developing effective composite moduli estimates, based on either the assumption of a periodic distribution or the assumption of a dilute distribution. The estimated dentin elastic constants obtained are close to the experimentally measured dentin elastic constants determined by ultrasonic speed of sound (SOS) measurements and resonant ultrasound spectroscopy (RUS). The estimated dentin elastic constants obtained provide a database to be used in evaluating potential dental restorative materials and for computational models evaluation other situations involving dentin.
Similar content being viewed by others
References
Kinney, J. H., Marshall, S. J., and Marshall, G. W., “The mechanical properties of human dentin: a critical review and re-evaluation of the dental literature,” Crit. Rev. Oral. Biol. Med., Vol. 14, pp. 13–29, 2003.
Anusavice, K. J. and Phillips, R. W., “Phillip’s Science of Dental Materials,” Elsevier Health Science, 2003.
Kinney, J. H., Balooch, M., Marshall, G. W., and Marshall, S. J., “A micromechanics model of the elastic properties of human dentine,” Archives of Oral Biology, Vol. 44, pp. 813–822, 1999.
Qin, Q. H. and Swain, M. V., “A micro-mechanics of dentin mechanical properties,” Biomaterials, Vol. 25, pp. 5081–5090, 2004.
Bowen, R. L. and Rodriguez, M. M., “Tensile strength and modulus of elasticity of tooth structure and several restorative materials,” J. Am. Dent. Assoc., Vol. 64, pp. 378–387, 1962.
Lehman, M. L., “Tensile strength of human dentin,” J. Dent. Res., Vol. 46, pp. 197–201, 1967.
Kinney, J. H., Balooch, M., Marshall, S. J., Marshall, G. W. Jr., and Weihs, T. P., “Hardness and Young’s modulus of human peritubular and intertubular dentine,” Arch. Oral Biol., Vol. 38, pp. 1003–1007, 1996.
Van Meekbeek, B., Willems, G., Celis, J. P., Roos, J. R., Braem, M., Lambrechts, P., and Vanherle, G., “Assessment by nano-indentation of the hardness and elasticity of the resin-dentin bonding area,” J. Dent. Res., Vol. 72, pp. 1434–1442, 1993.
Peyton, F. A., Mahler, D. B., and Hershenov, B., “Physical properties of dentin,” J. Dent. Res., Vol. 31, pp. 336–370, 1952.
Stanford, J. W., Wiegel, K. V., Paffenbarger, G. C., and Sweeney, W. T., “Compressive properties of hard tooth tissues and some restorative materials,” J. Am. Dent. Assoc., Vol. 60, pp. 746–756, 1960.
Gilmore, R. S., Pollack, R. P., and Katz, J. L., “Elastic properties of bovine dentine and enamel,” Arch. Oral Biol., Vol. 15, pp. 787–796, 1969.
Kinney, J. H., Gladden, J., Marshall, G. W., Marshall, S. J., So, J. H., and Maynard, J. D., “Resonant ultrasound spectroscopy measurements of the second order elastic constants in human dentin,” J. Biomech., Vol. 37, No. 4, pp. 437–441, 2004.
Yoon, Y. J. and Cowin, S. C., “The estimated elastic constants for a single bone osteonal lamella,” Biomechan Model Mechanobiol., Vol. 7, pp. 1–11, 2008.
Yoon, Y. J. and Cowin, S. C., “An estimate of anisotropic poroelastic constants of an osteon,” Biomechan. Model Mechanobiol., Vol. 7, pp. 13–26, 2008.
Cowin, S. C., “Bone poroelasticity,” Journal of Biomechanics, Vol. 32, pp. 217–238, 1999.
Gage, J. P., Francis, M. J. O., and Triffitt, J. T., “Collagen and dental matrices,” Wright, 1989.
Garant, P. R., “Oral Cells and Tissues,” Quintessence Publishing Co., Inc., 2003.
Zijp, J. R. and ten Bosch, J. J., “Theoretical model for the scatting of light by dentin and comparison with measurements,” Applied Optics, Vol. 32, pp. 411–415, 1993.
Symons, N. B. B., “Dentine and pulp, in: Cohen, B. and Kramer, I. R. H., (eds.), Scientific Foundations of Dentistry,” Heinemann Medical Books Publication, 1976.
Jones, S. J. and Boyde, A., “Ultrastructure of dentin and dentinogenesis. In: Dentin and dentinogenesis,” CRC Press, 1984.
Kinney, J. H., Pople, J. A., Marshall, G. W., and Marshall, S. J., “Collagen orientation and crystallite size in human dentin: A small angle x-ray scattering study,” Calcif Tissue Int., Vol. 69, pp. 31–37, 2001.
Boonstra, W. D., “Protein-apatite interactions in dentine,” Ph.D. Dissertation, Mathematics and Natural Sciences, State University of Groningen, Groningen, The Netherlands, 1991.
Fernandez-Seara, M. A., Wehrli, S. L., and Wehrli, F. W., “Diffusion of exchangeable water in cortical bone studied by nuclear magnetic resonance,” Biophysical Journal, Vol. 82, pp. 522–529, 2002.
Fernandez-Seara, M. A., Wehrli, S. L., Takahashi, M., and Wehrli, W., “Water content measured by proton-deuteron exchange NMR predicts bone mineral density and mechanical properties,” Journal of Bone and Mineral Research, Vol. 19, pp. 289–296, 2004.
Sukhodub, L. F., Moseke, C., Sukhodub, L. B., Sulkio-Cleff, B., Maleev, V. Y., Semenov, M. A., Bereznyak, E. G., and Bolbukh, T. V., “Collagen-hydroxyapatite-water interactions investigated by XRD, piezogravimetry, infrared and Raman spectroscopy,” Journal of Molecular Structure, Vol. 704, pp. 53–58, 2004.
Yoon, Y. J. and Cowin, S. C., “The elastic moduli estimation of the solid-water mixture,” International Journal of Solids and Structures, Vol. 46, pp. 527–533, 2009.
Garberoglio, R. and Brannstrom, M., “Scanning electron microscopy investigation of human dentinal tubules,” Archives of Oral Biology, Vol. 21, pp. 355–362, 1976.
Pashley, D. A., “Dentin: A dynamic substrate — a review,” Scanning Microscopy, Vol. 3, pp. 161–176, 1989.
Cowin, S. C. and Mehrabadi, M. M., “Anisotropic symmetries of linear elasticity,” Applied Mechanics Review, Vol. 48, pp. 247–285, 1995.
Cowin, D., “Tissue Mechanics,” Springer, 2007.
Katz, J. L., “Hard tissue as a composite material. I. Bounds on elastic behavior,” J. Biomech., Vol. 4, pp. 455–473, 1971.
Nemat-Nasser, S., Iwakuma, T., and Hejazi, M., “On composites with periodic structure,” Mechanics of Materials, Vol. 1, pp. 239–267, 1982.
Nemat-Nasser, S., Yu, N., and Hori, M., “Bounds and estimates of overall moduli of composites with periodic microstructure,” Mechanics of Materials, Vol. 15, pp. 163–181, 1993.
Nemat-Nasser, S. and Hori, M., “Micromechanics: Overall properties of heterogeneous materials, 2nd edition,” North-Holland, 1999.
Rho, J. Y., Kuhn-Spearing, L., and Zioupos, P., “Mechanical properties and the hierarchical structure of bone,” Medical Engineering and Physics, Vol. 20, pp. 92–102, 1998.
Torquato, S., “Random Hetrogeneous Materials: Microstructure and Macroscopic Properties,” Springer, 2002.
Gong, J. K., Arnold, J. S., and Cohn, S. H., “Composition of trabecular and cortical bone,” Anat. Rec., Vol. 149, pp. 325–332, 1964.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Yoon, Y.J. Estimation of the elastic constants of dentin. Int. J. Precis. Eng. Manuf. 14, 317–322 (2013). https://doi.org/10.1007/s12541-013-0043-9
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12541-013-0043-9