Abstract
A combined control method based on computed torque control and an implicit Lyapunov function method for trajectory tracking controlling of a 2-DOF manipulator was investigated. The manipulator works under condition of random base vibration and payload uncertainty. Base vibration acts on the manipulator in two directions: in vertical direction and in pitching direction. The computed torque control employed here aims to linearize the strongly nonlinear coupling manipulator system, and also to decouple it. Implicit Lyapunov function control method is one type of continuous feedback control. Its control gains are differentiable function of system error variables, and as the system error variables tend to zero, control gains will turn to infinite. Even so, this method can guarantee the control forces bounded in norm through the control process. The combined method is analyzed based on analytical models of manipulator system, which are established via second kind Lagrange equation. Specially, the analytical models are established according to base vibration in two directions. Numerical simulation results show that the combined control method has strong robustness against random base vibration in both direction and payload uncertainty. Besides, under all conditions considered in this paper, the method can always have fast convergence and high tracking accuracy.
Similar content being viewed by others
References
K. Nanos and E. G. Papadopoulos, On the dynamics and control of flexible joint space manipulators, Control Engineering Practice, 45 (2015) 230–243.
M. Santhakumar, Investigation into the dynamics and control of an underwater vehicle-manipulator system, Modelling and Simulation in Engineering, 2–3 (2013) 1–13.
E. Akdogan and M. A. Adli, The design and control of a therapeutic exercise robot for lower limb rehabilitation: Physiotherabot, Mechatronics, 21 (3) (2011) 509–522.
S. Domeij, Arrangement for transferring large-calibre ammunition from an ammunition magazine to loading position in a large-calibre weapon, U.S. Patent, USA (2007) No. 7231863.
X. Wu, Y. Wang and X. Dang, Robust adaptive slidingmode control of condenser-cleaning mobile manipulator using fuzzy wavelet neural network, Fuzzy Sets and Systems, 235 (2014) 62–82.
F. A. Lara-Molina, E. H. Koroishi and V. Steffen, Uncertainty analysis of a two-Link robot manipulator under fuzzy parameters, Robotics: SBR-LARS Robotics Symposium and Robocontrol (SBR LARS Robocontrol), Joint Conference on IEEE (2014) 1–6.
J. Li, H. Ma, C. Yang and M. Fu, Discrete-time adaptive control of robot manipulator with payload uncertainties, IEEE International Conference on Cyber Technology in Automation, Control, and Intelligent Systems (2015) 1971–1976.
R. Sharma, P. Gaur and A. P. Mittal, Design of two-layered fractional order fuzzy logic controllers applied to robotic manipulator with variable payload, Applied Soft Computing, 47 (2016) 565–576.
W. P. Li, B. Luo and H. Huang, Active vibration control of flexible joint manipulator using input shaping and adaptive parameter auto disturbance rejection controller, J. of Sound and Vibration, 363 (2016) 97–125.
A. Abe, Minimum energy trajectory planning method for robot manipulator mounted on flexible base, Control Conference (ASCC) (2013) 1–7.
X. Duan, Y. Qiu, H. Bao and J. Du, Real-time motion planning based vibration control of a macro-micro parallel manipulator system for super antenna, J. of Vibroengineering, 16 (2) (2014) 694–703.
G. Zhong, Y. Kobayashi, T. Emaru and Y. Hoshino, Approaches based on particle swarm optimization for problems of vibration reduction of suspended mobile robot with a manipulator, J. of Vibration and Control, 20 (1) (2014) 3–23.
M. Y. Cui, X. J. Xie and Z. J. Wu, Dynamics modeling and tracking control of robot manipulators in random vibration environment, IEEE Transactions on Automatic Control, 58 (6) (2013) 1540–1545.
J. Lin and Z. Z. Huang, A hierarchical fuzzy approach to supervisory control of robot manipulators with oscillatory bases, Mechatronics, 17 (10) (2007) 589–600.
M. Toda, Robust control for mechanical systems with oscillating bases, IEEE International Conference on Systems, Man, and Cybernetics, 2 (1999) 878–883.
M. Toda, An H8 control-based approach to robust control of mechanical systems with oscillatory bases, IEEE Transactions on Robotics and Automation, 20 (2) (2004) 283–296.
M. Sato and M. Toda, Motion control of an oscillatory-base manipulator in the global coordinates, International Conference on Control and Automation (2009) 349–354.
T. Iwamura and M. Toda, Motion control of an oscillatorybase manipulator using sliding mode control via rotating sliding surface with variable-gain integral control, American Control Conference (ACC) (2013) 5742–5747.
M. Sato and M. Toda, Estimation of ship oscillation subject to ship speed variation using an algorithm combining H8 and Kalman Filters, 11th IEEE International Conference on Control & Automation (ICCA) (2014) 929–934.
M. Sato and M. Toda, Robust motion control of an oscillatory-base manipulator in a global coordinate system, IEEE Transactions on Industrial Electronics, 62 (2) (2015) 1163–1174.
J. Shah, S. S. Rattan and B. C. Nakra, Dynamic analysis Of two link robot manipulator for control design using computed torque control, International J. of Research in Computer Applications and Robotics, 3 (1) (2015) 52–59.
M. I. Ullah, S. A. Ajwad, R. U. Islam, U. Iqbal and J. Iqbal, Modeling and computed torque control of a 6 degree of freedom robotic arm, International Conference on Robotics and Emerging Allied Technologies in Engineering (2014) 133–138.
M. Rahmani and A. Ghanbari, Computed torque control of a caterpillar robot manipulator using neural network, Advanced Engineering Forum. Trans Tech Publications, 15 (2016) 106–118.
I. M. Ananievski, Continuous feedback control for scleronomous mechanical systems, International Conference on Physics and Control, 4 (2003) 1226–1230.
I. M. Anan’evskii, Synthesis of continuous control of a mechanical system with an unknown inertia matrix, J. of Computer and Systems Sciences International, 45 (3) (2006) 356–367.
Y. F. Guo and B. L. Hou, Dynamics analysis of structure and positioning control of an ammunition coordinator, Acta Armamentarii, 34 (4) (2013) 392–397.
Y. F. Guo, B. L. Hou, X. Wang, Q. Q. Zhao and L. P. Yao, Nonlinear control of manipulator with base vibration and uncertain payload based on an implicit Lyapunov function method, IFToMM World Congress (2015) 256–260.
Y. F. Guo and B. L. Hou, Implicit Lyapunov functionbased tracking control of a novel ammunition autoloader with base oscillation and payload uncertainty, Nonlinear Dynamics, 87 (2) (2017) 741–753.
A. Jahed, F. Piltan, H. Rezaie and B. Boroomand, Design computed torque controller with parallel fuzzy inference system compensator to control of robot manipulator, International J. of Information Engineering & Electronic Business, 5 (3) (2013) 66–77.
I. M. Anan’Yevskii, Continuous feedback control of perturbed mechanical systems, J. of Applied Mathematics and Mechanics, 67 (2) (2003) 143–156.
Author information
Authors and Affiliations
Corresponding author
Additional information
Xi Wang received her B.S. in Mechanical Engineering and Automation from Nanjing University of Science and Technology, Nanjing, Jiangsu, China, in 2014. Now she is a doctoral student there, and does research on dynamics and nonlinear control of uncertain robotic systems.
Baolin Hou is a Professor in Mechanical Engineering and Automation of the School of Mechanical Engineering, Nanjing University of Science and Technology, Nanjing, Jiangsu, China. His research focus is on dynamics, control and integrated design of complex electromechanical system.
Rights and permissions
About this article
Cite this article
Wang, X., Hou, B. Trajectory tracking control of a 2-DOF manipulator using computed torque control combined with an implicit lyapunov function method. J Mech Sci Technol 32, 2803–2816 (2018). https://doi.org/10.1007/s12206-018-0537-6
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12206-018-0537-6