Abstract
There has been growing concern in recent years about contamination of foods by engineered nanoparticles (NPs) due to their increasing applications in food packaging materials, pesticides, and other products. In this study, we report a systematic approach to detect, characterize, and quantify engineered NPs (i.e., zinc oxide (ZnO) and titanium dioxide (TiO2) NPs) in food products. A series of concentrations of ZnO and TiO2 NPs from 0.05 to 1 wt% were spiked into corn starch, yam starch, and wheat flour. The presence of engineered NPs in foods was detected and measured by scanning electron microscopy coupled with energy-dispersive X-ray spectroscopy and transmission electron microscopy. The average sizes of ZnO and TiO2 NPs were around 38 and 40 nm in diameter, respectively. Most ZnO NPs were in either spherical or rod-like shape, while most TiO2 NPs were in a spherical shape. The concentrations of engineered NPs in food samples were measured by inductively coupled plasma optical emission spectrometry. Calibration curves were plotted for quantification of NPs in foods (R 2 = 0.984 and 0.995 for ZnO NPs in corn starch and wheat flour, respectively; R 2 = 0.992 and 0.998 for TiO2 NPs in yam starch and wheat flour, respectively). The results of this study could help develop systematic methodologies for detection, characterization, and quantification of NPs in food matrices.
Similar content being viewed by others
References
Adams, L. K., Lyon, D. Y., & Alvarez, P. J. J. (2006). Comparative eco-toxicity of nanoscale TiO2, SiO2, and ZnO water suspensions. Water Research, 40(19), 3527–3532.
Albrecht, M. A., Evans, C. W., & Raston, C. L. (2006). Green chemistry and the health implications of nanoparticles. Green Chemistry, 8(5), 417–432.
Anon (2009). The project on emerging nanotechnologies. On-line inventory of nanotechnology-based consumer products. Available at: http://www.nanotechproject.org/inventories/consumer/analysis_draft/. Accessed 22 Nov 2011
Baun, A., Hartmann, N., Grieger, K., & Kusk, K. (2008). Ecotoxicity of engineered nanoparticles to aquatic invertebrates: a brief review and recommendations for future toxicity testing. Ecotoxicology, 17(5), 387–395.
Carter, S., Fisher, A. S., Goodall, P. S., Hinds, M. W., Lancaster, S., & Shore, S. (2011). Atomic spectrometry update. Industrial analysis: metals, chemicals and advanced materials. Journal of Analytical Atomic Spectrometry, 26(12), 2319–2372.
Chapman, H. D., & Pratt, P. F. (1961). Methods of analysis for soils, plants, and waters. Riverside: University of California.
Chaudhry, Q., Scotter, M., Blackburn, J., Ross, B., Boxall, A., & Castle, L. (2008). Applications and implications of nanotechnologies for the food sector. Food Additives and Contaminants, 25(3), 241–258.
Chawengkijwanich, C., & Hayata, Y. (2008). Development of TiO2 powder-coated food packaging film and its ability to inactivate Escherichia coli in vitro and in actual tests. International Journal of Food Microbiology, 123(3), 288–292.
Choi, O., Clevenger, T. E., Deng, B., Surampalli, R. Y., Ross, L., Jr., & Hu, Z. (2009). Role of sulfide and ligand strength in controlling nanosilver toxicity. Water Research, 43(7), 1879–1886.
Cross, S. E., Innes, B., Roberts, M. S., Tsuzuki, T., Robertson, T. A., & McCormick, P. (2007). Human skin penetration of sunscreen nanoparticles: in-vitro assessment of a novel micronized zinc oxide formulation. Skin Pharmacology and Physiology, 20(3), 148–154.
Highbeam Research (2004). Taiyo kagaku offers zinc oxide nanopowder as food additive (metals and alloys). Available at: http://www.highbeam.com/doc/1G1-111360288.html. Accessed 22 Nov 2011
Irwin, K. D., Hilton, G. C., Wollman, D. A., & Martinis, J. M. (1996). X-ray detection using a superconducting transition-edge sensor microcalorimeter with electrothermal feedback. Applied Physics Letters, 69(13), 1945–1947.
Johnston, H. J., Hutchison, G., Christensen, F. M., Peters, S., Hankin, S., & Stone, V. (2010). A review of the in vivo and in vitro toxicity of silver and gold particulates: particle attributes and biological mechanisms responsible for the observed toxicity. Critical Reviews in Toxicology, 40(4), 328–346.
Kim, K. H., Park, K. C., & Ma, D. Y. (1997). Structural, electrical and optical properties of aluminum doped zinc oxide films prepared by radio frequency magnetron sputtering. Journal of Applied Physics, 81(12), 7764–7772.
Liu, Y., He, L., Mustapha, A., Li, H., Hu, Z. Q., & Lin, M. (2009). Antibacterial activities of zinc oxide nanoparticles against Escherichia coli o157:H7. Journal of Applied Microbiology, 107(4), 1193–1201.
Liu, X., Chen, G., & Su, C. (2011). Effects of material properties on sedimentation and aggregation of titanium dioxide nanoparticles of anatase and rutile in the aqueous phase. Journal of Colloid and Interface Science, 363(1), 84–91.
Magnuson, B. A., Jonaitis, T. S., & Card, J. W. (2011). A brief review of the occurrence, use, and safety of food-related nanomaterials. Journal of Food Science, 76(6), R126–R133.
Maneerat, C., & Hayata, Y. (2006). Antifungal activity of tio2 photocatalysis against Penicillium expansum in vitro and in fruit tests. International Journal of Food Microbiology, 107(2), 99–103.
O’Brien, N., & Cummins, E. (2008). Recent developments in nanotechnology and risk assessment strategies for addressing public and environmental health concerns. Human and Ecological Risk Assessment: An International Journal, 14(3), 568–592.
Pung, S.-Y., Choy, K.-L., & Hou, X. (2010). Tip-growth mode and base-growth mode of Au-catalyzed zinc oxide nanowires using chemical vapor deposition technique. Journal of Crystal Growth, 312(14), 2049–2055.
Qu, J., Luo, C., & Hou, J. (2011). Synthesis of ZnO nanoparticles from Zn-hyperaccumulator (Sedum alfredii hance) plants. Micro & Nano Letters, 6(3), 174–176.
Rao, M. A. (2009). Nanoscale particles in food and food packaging. Journal of Food Science, 74(9), viii–viii.
Reilly, C. (2002). Metal contamination of food. Oxford: Blackwell Science, Ltd.
Sozer, N., & Kokini, J. L. (2009). Nanotechnology and its applications in the food sector. Trends in Biotechnology, 27(2), 82–89.
Šramkováa, Z., Gregováb, E., & Šturdíka, E. (2009). Chemical composition and nutritional quality of wheat grain. Acta Chimica Slovaca, 2(1), 115–138.
Tiede, K., Boxall, A. B. A., Tear, S. P., Lewis, J., David, H., & Hassellov, M. (2008). Detection and characterization of engineered nanoparticles in food and the environment. Food Additives and Contaminants, 25(7), 795–821.
Zhang, Y., Chen, Y., Westerhoff, P., Hristovski, K., & Crittenden, J. C. (2008). Stability of commercial metal oxide nanoparticles in water. Water Research, 42(8–9), 2204–2212.
Zhou, J. J., Wang, S. Y., & Gunasekaran, S. (2009). Preparation and characterization of whey protein film incorporated with TiO2 nanoparticles. Journal of Food Science, 74(7), N50–N56.
Acknowledgments
This study was supported by USDA NIFA Nanotechnology Program project #2011-67021-30391. We acknowledge the assistance from Xin Sun and Liang Chen of the Department of Mechanical Engineering and the Electron Microscopy Core facility at the University of Missouri in electron microscopy analysis.
Author information
Authors and Affiliations
Corresponding author
Additional information
Xuesong Song and Ruoyu Li have equal contribution to this work.
Rights and permissions
About this article
Cite this article
Song, X., Li, R., Li, H. et al. Characterization and Quantification of Zinc Oxide and Titanium Dioxide Nanoparticles in Foods. Food Bioprocess Technol 7, 456–462 (2014). https://doi.org/10.1007/s11947-013-1071-2
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11947-013-1071-2