Abstract
In response to the goal of net-zero emissions proposed by Intergovernmental Panel on Climate Change, Chinese government has pledged that carbon emissions will peak by 2030, and achieve carbon neutrality by 2060. However, the high carbon energy structure of traditional industries has aggravated environmental problems, such as greenhouse effect and air pollution. The goal of carbon neutrality will be difficult to achieve without the development of disruptive theories and technologies. The electrolytic zinc industry requires high-temperature roasting at ∼1000 °C, generating large amounts of greenhouse gases and SO2. High concentrations of sulfuric acid (200 g/L) are subsequently used for electrolysis, and each ton of zinc produced generates 50 kg of anode slime with lead content of up to 16%, as well as 0.35 m3 of wastewater containing zinc and lead. To solve these problems, an optical metallurgy method is proposed in this study. The proposed method uses laser-induced photoreduction to decompose ZnS and reduce metal ions to metal. Results indicate that Zn0 and S8 can be detected on the surface of ZnS at a specific wavelength and laser fluence. The generation mechanism of Zn0 is such that laser induces an electronic transition that breaks ionic bond in ZnS, resulting in its decomposition and photoreduction to Zn0 under an inert argon gas atmosphere. This method does not reduce other metals in the mineral since it does not use high-temperature roasting, providing a new way of producing high-purity metal without greenhouse gas emissions and heavy metal pollution caused by traditional zinc electrolysis.
Article PDF
Avoid common mistakes on your manuscript.
References
Achehboune M, Khenfouch M, Boukhoubza I, Leontie L, Doroftei C, Carlescu A, Bulai G, Mothudi B, Zorkani I, Jorio A (2022). Microstructural, FTIR and Raman spectroscopic study of rare earth doped ZnO nanostructures. Materials Today: Proceedings, 53: 319–323
Ale Ebrahim H, Jamshidi E (2004). Energy Conversion and Management, 45(3): 345–363
Chuayboon S, Abanades S (2023). Solar metallurgical process for high-purity Zn and syngas production using carbon or biomass feedstock in a flexible thermochemical reactor. Chemical Engineering Science, 271: 118579
Du Q Z, Ren E Y (1995). A new attempt of laser application: laser metallurgy. Journal of Kunming Institute of Technology, 1: 96
Feng L P, Zhang L X, Chen X, Zhang C X, Mao G J, Wang H (2022). A visible light-driven photoelectrochemical sensor for mercury (II) with “turn-on” signal output through in-situ formation of double type-II heterostructure using CdS nanowires and ZnS quantum dots. Chemical Engineering Journal, 441: 136073
Feng Y, Liu Z Q, Yi X S (2000). Co-occurrence of photochemical and thermal effects during laser polymer ablation via a 248-nm excimer laser. Applied Surface Science, 156(1–4): 177–182
Griessacher T, Antrekowitsch J, Steinlechner S (2012). Charcoal from agricultural residues as alternative reducing agent in metal recycling. Biomass and Bioenergy, 39: 139–146
Jiang G F, Zhu B J, Sun J Z, Liu F, Wang Y Q, Zhao C C (2023). Enhanced activity of ZnS (111) by N/Cu co-doping: accelerated degradation of organic pollutants under visible light. Journal of Environmental Sciences (China), 125: 244–257
Jiang H Q, Jin S Y, Wang C, Ma R Q, Song Y Y, Gao M Y, Liu X T, Shen A G, Cheng G J, Deng H X (2019). Nanoscale laser metallurgy and patterning in air using MOFs. Journal of the American Chemical Society, 141(13): 5481–5489
Keshav R, Mg M (2018). Photoluminescence and Raman spectroscopic analysis of PV deposited ZnS thin films. Materials Research Bulletin, 105: 360–367
Kumar P, Rao G K (2022). Comprehensive analysis of microstructural, optical and electrical properties of ZnS thin films deposited by cost effective SILAR technique. Materials Today: Proceedings, 65(1): 380–384
Kumar V P, Pradeep C, Raj Sha M M, Radhakrishnan P, Mujeeb A (2023). Band-gap dependence of three-photon absorption in NiO nanoparticles synthesized at different calcination temperatures. Optics & Laser Technology, 158(Part A): 108809
Low J X, Dai B Z, Tong T, Jiang C J, Yu J G (2019). In situ irradiated X-ray photoelectron spectroscopy investigation on a direct Z-scheme TiO2/CdS composite film photocatalyst. Advanced Materials, 31(6): 1802981
Major K J, Florea C M, Poutous M K, Busse L E, Sanghera J S, Aggarwal I D (2014). Surface transmission enhancement of ZnS via continuous-wave laser microstructuring. Laser-Based Micro- and Nanoprocessing VIII, 8968: 896810
Meng A, Huang T Q, Li H Y, Cheng H, Lin Y S, Zhao J, Li Z J (2021). Sulfur vacancies and morphology dependent sodium storage properties of MoS2−x and its sodiation/desodiation mechanism. Journal of Colloid and Interface Science, 589: 147–156
Naik S S, Lee S J, Theerthagiri J, Yu Y, Choi M Y (2021). Rapid and highly selective electrochemical sensor based on ZnS/Au-decorated f-multi-walled carbon nanotube nanocomposites produced via pulsed laser technique for detection of toxic nitro compounds. Journal of Hazardous Materials, 418: 126269
Okano K, Hsu H Y, Li Y K, Masuhara H (2016). In situ patterning and controlling living cells by utilizing femtosecond laser. Journal of Photochemistry and Photobiology C, Photochemistry Reviews, 28: 1–28
Omran M, Fabritius T, Heikkinen E P, Chen G (2018). Dielectric properties and carbothermic reduction of zinc oxide and zinc ferrite by microwave heating. Royal Society Open Science, 1–16: 170710
Qi C C, Ye L P, Ma X T, Yang D L, Hong J L (2017). Life cycle assessment of the hydrometallurgical zinc production chain in China. Journal of Cleaner Production, 156: 451–458
Roychowdhury A, Pati S P, Kumar S, Das D (2014). Effects of magnetite nanoparticles on optical properties of zinc sulfide in fluorescent-magnetic Fe3O4/ZnS nanocomposites. Powder Technology, 254: 583–590
Scocioreanu M, Baibarac M, Baltog I, Pasuk I, Velula T (2012). Photoluminescence and Raman evidence for mechanico-chemical interaction of polyaniline-emeraldine base with ZnS in cubic and hexagonal phase. Journal of Solid State Chemistry, 186: 217–223
Shee N K, Adekunle F A O, Verma R, Kumar D, Datta D (2015). A copper(II) complex with a Cu-S-8 bond. Attenuated total reflectance, electron paramagnetic resonance, resonance Raman and atoms-in-molecule calculations. Spectrochimica Acta. Part A: Molecular and Biomolecular Spectroscopy, 151(5): 96–99
Wagner C D, Naumkin A V, Kraut-Vass A, Allison J W, Powell C J, Rumble J R Jr (2012). NIST X-ray Photoelectron Spectroscopy Database, NIST Standard Reference Database 20, Version 4.1 (Web Version), U.S. Department of Commerce
Waltrovitz R R, Qian G J, de Groot F, Quinton J S, Harmer S L (2022). Influence of Co:Fe:Ni ratio on cobalt Pentlandite’s electronic structure and surface speciation. Minerals Engineering, 190: 107935
Xiang H Q, Zhou Z C, Yang Y, Yu Z H, Liu J G (2022). Fabrication of metallic patterns on ordinary polymer substrates by laser direct activation and electroless plating. Surfaces and Interfaces, 33: 102209
Yang C, Wang J, Wang R, Zhu W, Zhang L, Du T, Sun J, Zhu M Q, Shen Y, Wang J (2023). Efficient hollow cubic Co9S8@defective ZnS/g-C3N4 for multi-pollutants removal via cascade Z-scheme heterojunction. Applied Catalysis B: Environmental, 322: 122084
Yang H, Huang X J, Hu J L, Thompson J R, Flower R J (2022). Achievements, challenges and global implications of China’s carbon neutral pledge. Frontiers of Environmental Science & Engineering, 16(8): 111
Ye G, Wang W, Fan D, He P (2021). Effects of femtosecond laser micromachining on the surface and substrate properties of polylactic acid (PLA). Applied Surface Science, 538: 148117
Young Maeng J, Hyun Yang J, Ji Jang H, Hee Joo M, Jun Kim Y, Kyun Rhee C, Sohn Y (2023). Electrocatalytic syngas and photocatalytic long-chain hydrocarbon productions by CO2 reduction over ZnO and Zn-based electrodes. Applied Surface Science, 609: 155349
Zhang H, Cui Q Q, Xu L L, Jiao A X, Tian Y, Liu X D, Li S, Li H S, Chen M, Chen F (2020). Blue laser-induced photochemical synthesis of CuAg nanoalloys on h-BN supports with enhanced SERS activity for trace-detection of residual pesticides on tomatoes. Journal of Alloys and Compounds, 825: 153996
Zhang X, Xuan Y, Wang B, Gao C, Niu S L, Zhao G J, Wang D, Li J H, Lu C M, Crittenden J C (2022b). Precise regulation of acid pretreatment for red mud SCR catalyst: targeting on optimizing the acidity and reducibility. Frontiers of Environmental Science & Engineering, 16(7): 88
Zhang Y W, Zhang Y J, Zhu H X, Zhou P X, Liu S, Lei X L, Li Y H, Li B, Ning P (2022a). Life cycle assessment of pollutants and emission reduction strategies based on the energy structure of the nonferrous metal industry in China. Energy, 261(15): 125148
Zhou T S, Wan H, Liu M K, Wu Q Y, Fan Z C, Zhu Y C (2022). Regulating uniform nucleation of ZnS enables low-polarized and high stable aqueous Zn-S batteries. Materials Today. Energy, 27: 101025
Acknowledgements
This work was supported by the National Natural Science Foundation of China (Nos. 52174385 and 41877392), and Fundamental Research Funds for the Central Universities, Tongji University (No. 22120220166).
Author information
Authors and Affiliations
Corresponding authors
Ethics declarations
Conflict of Interests The authors Ning Duan and Fuyuan Xu are Editorial Board Members of Frontiers of Environmental Science & Engineering. The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest.
Additional information
Highlights
• An optical metallurgy is proposed to directly generate Zn0 from ZnS using laser.
• Zn0 and S8 can be detected on the surface of ZnS at a high laser fluence.
• The generation mechanism of Zn0 and S8 was explored.
• Providing a new way of producing high-purity metal without carbon emissions.
• A new method is proposed to promote the environmental goal of carbon neutrality.
Electronic supplementary material
Rights and permissions
This article is published with open access at link.springer.com and journal.hep.com.cn
This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Chen, Y., Duan, N., Jiang, L. et al. Direct generation of Zn metal using laser-induced ZnS to eradicate carbon emissions from electrolysis Zn production. Front. Environ. Sci. Eng. 18, 7 (2024). https://doi.org/10.1007/s11783-024-1767-8
Received:
Revised:
Accepted:
Published:
DOI: https://doi.org/10.1007/s11783-024-1767-8