Abstract
In order to show the effects of different diameter combinations on crude oil temperature when a crude oil pipeline and a products pipeline are laid in one trench, four typical diameter combinations are selected to conduct numerical simulation. After a series of calculations, the minimum mean temperature difference and the maximum temperature difference of the crude oil along the pipelines are obtained. In real pipeline constructions, the effects of other diameter combinations on crude oil temperature can be predicted by the method of linear interpolation to calculate results of the four diameter combinations obtained in this study.
Similar content being viewed by others
References
Yu Bo, Wang Yi, Liu Xin, Zhang Jinjun, Zheng Zhangwei, Wang Kai. Model studies thermal effects of liquid pipeline collocation. Oil & Gas Journal, 2007, 105(18): 54–58
Yu Bo, Wang Yi, Zhang Jinjun, Liu Xin, Zheng Zhangwei, Wang Kai. Thermal impact of the products pipeline on the crude oil pipeline laid in one ditch-The effect of pipeline interval. International Journal of Heat and Mass Transfer, 2008, 51(3,4): 597–609
Yu Bo, Ling Xiao, Zhang Jinjun, Wang Yi. Study on laying technology of products pipeline along with hot crude pipeline in one ditch. Acta Petrolei Sinica, 2007, 28(5): 149–152
Yu Bo, Lin M J, Tao Wenquan. Automatic generation of unstructured grids with Delaunay triangulation and its application. Heat and Mass Transfer, 1999, 35(5): 361–370
Tao Wenquan. Recent Advances of Numerical Heat Transfer. Beijing: Science Press, 2005, 432–463 (in Chinese)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Yu, B., Shi, Y., Liu, X. et al. Impacts of different diameter combinations on the temperature of a crude oil pipeline when colocating with a products pipeline. Front. Energy Power Eng. China 4, 192–197 (2010). https://doi.org/10.1007/s11708-009-0074-1
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11708-009-0074-1