Abstract
Wavelike slug-flow is a representative flow type in horizontal pneumatic conveying. Kinetic theory was introduced to establish a 3D kinetic numerical model for wavelike slug gas-solid flow in this paper. Wavelike motion of particulate slugs in horizontal pipes was numerically investigated. The formation and motion process of slugs and settled layer were simulated. The characteristics of the flow, such as pressure drop, air velocity distribution, slug length and settled layer thickness, and the detailed changing characteristics of slug length and settled layer thickness with air velocity were obtained. The results indicate that kinetic theory can represent the physical characteristics of the non-suspension dense phase flow of wavelike slug pneumatic conveying. The experiment in this paper introduced a new idea for the numerical calculation of slug-flow pneumatic conveying.
Similar content being viewed by others
References
Wen C Y, Simons H P. Flow characteristics in horizontal fluidized solids transport. AICHE Journal, 1959, 5: 263–267
Tomita Y, Jotaki T, Hayashi H. Wavelike motion of particulate slugs in a horizontal pneumatic pipeline. Int J Multiphase Flow, 1981, 7: 151–166
Dhodapar S V, Plasynski S I, Klinzing G E. Plug flow movement of solid. Powder Technology, 1994, 81: 1–7
Laouar S, Molodtsof Y. Experimental characterization of the pressure drop in dense phase pneumatic transport at very low velocity. Powder Technology, 1998, 95: 165–170
Herbreteau C, Bouard R. Experimental study of parameters which in fluence the energy minimum in horizontal gas-solid conveying. Powder Technology, 2000, 112: 213–220
Pan R. Material properties and flow modes in pneumatic conveying. Powder Technology, 1999, 104: 157–163
Tsuji Y, Tanaka T, Ishida T. Lagrangian numerical simulation of plug flow of cohesionless particles in a horizongtal pipe. Powder Technology, 1992, 71: 239–250
Wilson K C. A Unified physically based analysis of solid-liquid pipeline flow. Proc Hydrotansp, 1976, 4: 1–16
Hong J, Tomita Y. Analysis of high density gas-solids stratified pipe flow. Int J Multiphase Flow, 1993, 21(4): 649–665
Tomita Y, Tateishi K. Pneumatics slug conveying in a horizontal pipeline. Powder Technology, 1997, 94: 229–233
Levy A. A comparison of analytical and numerical models with experimental data for gas-sold flow through a straight pipe at different inclinations. Powder Technology, 1997, 93: 253–260
Chen D M, Klausner J F, Mei R W. A fluid mechanics approach to describing the behavior of pneumatically conveyed powder plugs. Powder Technology, 2002, 124: 127–137
Doron P, Barnea B D. A three layer model for solid-liquid flow in horizontal pipe. Int J Multiphase Flow, 1993, 19: 1 029–1 043
Masona D J, Levy A. A model for non-suspension gas-solids flow of fine powders in pipes. International Journal of Multiphase Flow, 2001, 27(3): 415–435
Levy A. Tow-fliud approach for plug flow simulations in horizontal pneumatic convying. Powder Technology, 2000, 112: 263–272
Ding Jianmin, Gidspow D. A bubbling fluidization model using kinetic theory of granular flow. AIChE Journal, 1990, 36(4): 523–528
Zhang Y H, Resse J M. Particle-gas turbulence interactions in a kinetic theory approach to granular flows. Int J Multiphase Flow, 2001, 27: 1 945–1 964
Gidaspow D. Hydrodynamics of circulating fluidized beds, kinetic theory approach, fluidization VII. In: Proceedings of the 7th Engineering Foundation Conference on Fluidization Brisbane: AIChE, 1992, 75–82
Wen C Y, Yu Y H. Mechanics of fluidization. Chem Eng Prog Symp, 1966, 62: 100–111
Ergun S. Fluid flow through packed columns. Chem Eng Prog, 1952, 48(2): 89–94
Chapman S, Cowling T G. The Mathematical Theory of Non-Uniform Gases. Cambridge: Cambridge Universuty Press, 1970
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Journal of Engineering Thermophysics, 2006, 27(1): 75–78 [译自: 工程热物理学报]
Rights and permissions
About this article
Cite this article
Gu, Z., Guo, L. Simulation of horizontal slug-flow pneumatic conveying with kinetic theory. Front. Energy Power Eng. China 1, 336–340 (2007). https://doi.org/10.1007/s11708-007-0050-6
Issue Date:
DOI: https://doi.org/10.1007/s11708-007-0050-6