Abstract
A form stable NaCl-Al2O3 (50–50 wt-%) composite material for high temperature thermal energy storage was fabricated by cold sintering process, a process recently applied to the densification of ceramics at low temperature 300°C under uniaxial pressure in the presence of small amount of transient liquid. The fabricated composite achieved as high as 98.65% of the theoretical density. The NaCl-Al2O3 composite also retained the chloride salt without leakage after 30 heating-cooling cycles between 750°C–850°C together with a holding period of 24 h at 850°C. X-ray diffraction measurements indicated congruent solubility of the alumina in chloride salt, excellent compatibility of NaCl with Al2O3, and chemical stability at high temperature. Structural analysis by scanning electron microscope also showed limited grain growth, high density, uniform NaCl distribution and clear faceted composite structure without inter-diffusion. The latent heat storage density of 252.5 J/g was obtained from simultaneous thermal analysis. Fracture strength test showed high sintered strength around 5 GPa after 50 min. The composite was found to have fair mass losses due to volatilization. Overall, cold sintering process has the potential to be an efficient, safe and cost-effective strategy for the fabrication of high temperature thermal energy storage materials.
Article PDF
Similar content being viewed by others
References
Xu T, Li Y, Chen J, Liu J. Preparation and thermal energy storage properties of LiNO3-KCl-NaNO3/expanded graphite composite phase change material. Solar Energy Materials and Solar Cells, 2017, 169: 215–221
Zhu J, Li R, Zhou W, Zhang H, Cheng X. Fabrication of Al2O3-NaCl composite heat storage materials by one-step synthesis method. Journal of Wuhan University of Technology-Materials Science Edition, 2016, 31(5): 950–954
Zhang H, Baeyens J, Cáceres G, Degrève J, Lv Y. Thermal energy storage: Recent developments and practical aspects. Progress in Energy and Combustion Science, 2016, 53: 1–40
Guney M S, Tepe Y. Classification and assessment of energy storage systems. Renewable & Sustainable Energy Reviews, 2017, 75: 1187–1197
Chen H, Cong T N, Yang W, Tan C, Li Y, Ding Y. Progress in electrical energy storage system: A critical review. Progress in Natural Science, 2009, 19(3): 291–312
Dinker A, Agarwal M, Agarwal G D. Heat storage materials, geometry and applications: A review. Journal of the Energy Institute, 2017, 90(1): 1–11
Alva G, Lin Y, Fang G. An overview of thermal energy storage systems. Energy, 2018, 144: 341–378
Myers P D Jr, Goswami D Y. Thermal energy storage using chloride salts and their eutectics. Applied Thermal Engineering, 2016, 109: 889–900
Arconada N, Arribas L, Lucio B, González-Aguilar J, Romero M. Macro encapsulation of sodium chloride as phase change materials for thermal energy storage. Solar Energy, 2018, 167: 1–9
Jiang Y, Sun Y, Liu M, Bruno F, Li S. Eutectic Na2CO3-NaCl salt: A new phase change material for high temperature thermal storage. Solar Energy Materials and Solar Cells, 2016, 152: 155–160
Du L, Tian H, Wang W, Ding J, Wei X, Song M. Thermal stability of the eutectic composition in NaCl-CaCl2-MgCl2 ternary system used for thermal energy storage applications. Energy Procedia, 2017, 105: 4185–4191
Cabeza L F, Nguan H, Steven T. High Temperature Thermal Storage Systems Using Phase Change Materials. Cambridge: Academic Press, 2018, 195–230
Guo H, Baker A, Guo J, Randall C A. Cold sintering process: A novel technique for low-temperature ceramic processing of ferroelectrics. Journal of the American Ceramic Society, 2016, 99(11): 3489–3507
Maria J P, Kang X, Floyd R D, Dickey E C, Guo H, Guo J, Randall C A. Cold sintering: Current status and prospects. Journal of Materials Research, 2017, 32(17): 3205–3218
Bouville F, Studart A R. Geologically-inspired strong bulk ceramics made with water at room temperature. Nature Communications, 2017, 8(1): 14655
Wei G, Wang G, Xu C, Ju X, Xing L, Du X, Yang Y. Selection principles and thermophysical properties of high temperature phase change materials for thermal energy storage: A review. Renewable & Sustainable Energy Reviews, 2018, 81: 1771–1786
Induja I J, Sebastian M T. Microwave dielectric properties of cold sintered Al2O3-NaCl composite. Materials Letters, 2018, 211: 55–57
Randall M G. Sintering: From Empirical Observations to Scientific Principles. London: Butterworth-Heinemann, 2014, 71–130
Guo J, Guo H, Baker A L, Lanagan M T, Kupp E R, Messing G L, Randall C A. Cold sintering: A paradigm shift for processing and integration of ceramics. Angewandte Chemie International Edition, 2016, 55(38): 11457–11461
Boxley C J, Watkins J J, White H S. Al2O3 film dissolution in aqueous chloride solutions. Electrochemical and Solid-State Letters, 2003, 6(10): 38–41
Dadkhah M, Saboori A, Jafari M. Investigating the physical properties of sintered alumina in the presence of MgO nanopowder. Journal of Materials, 2014, 496146, 1–7
Acknowledgements
The authors would like to acknowledge the financial support of the Engineering and Physical Sciences Research Council (EPSRC) of the United Kingdom (Grant Nos. EP/N000714/1 and EP/N021142/1). Abuja Nigeria is also highly appreciated for Ph.D. scholarship support via Petroleum Technology Development Fund.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Suleiman, B., Yu, Q., Ding, Y. et al. Fabrication of form stable NaCl-Al2O3 composite for thermal energy storage by cold sintering process. Front. Chem. Sci. Eng. 13, 727–735 (2019). https://doi.org/10.1007/s11705-019-1823-2
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11705-019-1823-2