Abstract
By using the spark plasma sintering process, Ti2AlC/TiAl composite with the addition of Niobium (Nb) was prepared in-situ and the microstructure of Ti2AlC/TiAl (Nb) composite was investigated by means of transmission electron microscopy (TEM) and high-resolution electron microscopy (HREM). The results indicate that new-formed Ti2AlC particles disperse with a high degree of uniformity and well combine with the matrix. In the area of phase interface the d-spaces of Ti2AlC (100) and TiAl (110) were measured as 0.2648 nm and 0.2991 nm, respectively. The atom arrangement beside the interface was only partly corresponding, existing in semicoherent state. On the contrary, in the area of grain interface the d-spaces of TiAl (100) and TiAl (110) were measured as 0.2462 nm and 0.2631 nm, respectively and the atom arrangement beside the interface was almost corresponding, existing in coherent state
Similar content being viewed by others
References
Guoding Zhang. Interfaces in Metal Matrix Composites [J]. Chinese Journal of Materials Research, 1997(6): 649–657
Y W Kim. Ordered Intermetallic Alloys, part III: Gamma Titanium Aluminides [J]. JOM, 1994, 41(7): 30–39
H E Deve, A G Evans, D S Shih. A High-toughness γ-Titanium Aluminides[J]. Acta Metall. Mater., 1992, 40(6): 1 259–1 264
Warier S G, Chen S D, Wu S K, et al. The Deformation and Fracture of TiAl at Elevated Temperatures[J]. Met. Trans., 1996 (27): 1 379–1 384
Mei zhi, Gu Ming Yuan, Wu renjie. Characterization of Metal Matrix Composite Interface and Its Advances [J]. Materials Science and Engineering, 1996,14(3): 1–5
Ibrahim I A, Mohamed F A, Lavernia E J. Particulate Reinforced Metal Matrix Composites, A Review [J]. Mater. Sci., 1991 (26): 1 137–1 156
Jiuxing Zhang, Kegao Liu, Meiling Zhou. Development and Application of Spark Plasma Sintering [J]. Power Metallurgy Technology, 2002,20(3): 129–135
Yue Yun-long, Wu Hai-tao, Wang Chuan-bin, et al. Development of Studies of TiAl Intermetallic [J]. Journal of Jinan University, 2004, 18(1): 32–34
Hu Shiping, He guiyu. New Ti-Toughened TiAl Composites [J]. Journal of Northwestern Polytechnical University, 1996,14(1): 149–152
He Guiyu, Li liefeng, Chu shuangjie. TiAl Matrix Composites Reinforced by Ti-Fiber Coated with Al2O3 [J]. Ordnance Materials Science and Engineering, 1996,19(2): 3–8
Zhang Chengquan, He guiyu, Wu jiansheng. Fundamental Investigation of TiNb Fiber Continuously Reinforced Ti-48Al-2Cr-2Nb Matrix Composites [J]. Materials Science and Technology, 2000,8(4): 77–79
K T Venkateswara. On the Contrasting Role of Ductilephase Reinforcements in the Fracture Toughness and Fatiguecrack Propagation Behavior of TiNb/γ-TiAl Intermetallic Matrix Composites [J]. Acta.Metall. Mater., 1992, 40(2): 353–361
Yue Yun-long, Gong Yan-sheng, Wu Hai-tao, et al. Fabrication and Mechanical Properties of TiC Particles Reinforced TiAl Composite [J]. Journal of Wuhan University of Technology-Materials Science Edition, 2003,19(1):1–4
Schuster J C, Nowotny H, Vaccaro C. The Ternary System: Cr-Al-C, V-Al-C and the Behavior of H-Phases (M2AlC) [J]. Solid State Chemistry, 1980(32): 213–219
Bi Gang, Wang Haowei, Wu Renjie. Characterization and Measurement of Interfacial Reaction in Metal Matrix Composites [J]. Materials for Mechanical Engineering, 1999,23(5): 1–4
Author information
Authors and Affiliations
Additional information
Funded by the Shandong Provincial Natural Science Foundation (No.22003F02)
Rights and permissions
About this article
Cite this article
Yue, Y., Wu, H., Zhang, L. et al. Preparation and microstructural analysis of Ti2AlC/TiAl(Nb) composite. J. Wuhan Univ. Technol. 22, 7–11 (2007). https://doi.org/10.1007/s11595-005-1007-4
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/s11595-005-1007-4