Skip to main content
SpringerLink
Log in

Design and analysis of partially decoupled translational parallel mechanisms with single-loop structures

  • Research Article
  • Published:
Frontiers of Mechanical Engineering Aims and scope Submit manuscript

Abstract

This study presents a family of novel translational parallel mechanisms (TPMs) with single-loop topological structures. The proposed mechanism consists of only revolute and prismatic joints. The novel TPMs are simpler in structure and have fewer joints and components than the well-known Delta Robot. Four types of 2-degree of freedom driving systems are applied to different limb structures to avoid the moving actuator that causes the problem of increased moving mass. Four sample TPMs are constructed using the synthesized limbs, and one of them is investigated in terms of kinematic performance. First, a position analysis is performed and validated through numerical simulation to reveal the characteristics of partially decoupled motion, which improves the controllability of TPM. Second, singular configurations are identified, and the resulting singularity curve is obtained. Lastly, the workspace of TPM is analyzed, and the relationship between the singular configurations and the reachable workspace is explored. The workspace of the 3-CRR (C denotes the cylindrical joint and R denotes the revolute joint) translational mechanism is also presented to prove that the proposed TPM has a fairly large workspace.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Similar content being viewed by others

Abbreviations

a 1, a 2, a 3 :

Lengths of links OA1, OA2, and A1A3, respectively

b i :

Length of link AiBi (i = 1, 2, 3)

c i :

Length of link BiCi (i = 1, 2, 3)

\({{\dot d}_{ij}}\) :

Intensity associated with the jth prismatic joint in the ith limb (i = 1, 2, and j = 1, 2)

{D}:

6-dimensional rigid motion

{G(u)}, {G(v)}:

Planar motion determined by the normal vectors u and v, respectively

{G 2(v)}:

A subset of {G(v)}

h :

Distance between point o and the center point of the end effector

k :

Nonzero coefficient

l i :

Length of different links

m :

Component of distance between points o and Ci in the y-direction (i = 1, 2, 3)

{M}:

Displacement submanifold of the terminal body relative to the base body

{M Si}:

Motion subgroup of the ith serial kinematic chain (i = 1, 2)

{M(u i)}:

Displacement subgroup associated with the ith joint (i = 1, 2, …, n)

n :

Component of distance between points o and Ci in the x-direction (i = 1, 2, 3)

{Pa(u)}, {Pa(v)}, {Pa(w)}:

Translations along the direction perpendicular to the long side of the parallelogram with the axes of revolute joints in the composite joint parallel to the u, v, and w direction, respectively

{R(N, u)}, {R(N, v)}:

Rotations about the axis determined by the point N and the unit vectors u and v, respectively

{R(N i, u)}, {R(N i, v)}, {R(N i, w)}:

Rotations about the axis determined by the point Ni and the unit vectors u, v, and w, respectively (i = 1, 2, …, 6)

S i :

ith serial kinematic chain (i = 1, 2)

s ij :

Unit vector associated with the jth joint of the ith limb (i = 1, 2, and j = 1, 2, …, 4)

s rij :

Unit vector associated with the jth reciprocal wrench in the ith limb (i = 1, 2, and j = 1, 2)

{T}:

3-dimensional translation in space

{T(u)}, {T(v)}, {T(w)}:

Translations along the unit vectors u, v, and w, respectively

v P :

Linear velocity of the center of mass of the mobile platform

w P :

Angular velocity of the center of mass of the mobile platform

x A1 :

Motion parameter of actuated prismatic pair in the first limb

{X(u)}, {X(v)}, {X(w)}:

3-dimensional translation and one rotation about the unit vectors u, v, and w, respectively

y A2 :

Motion parameter of actuated prismatic pair in the second limb

α :

Output rotational angle around one axis in the 2-DOF driving system

α 1 :

Angle between the Y axis and the long rod of the parallelogram joint in the first limb

α 2 :

Angle between the X axis and the long rod of the parallelogram joint in the second limb

θ :

Output rotational angle around the other axis in the 2-DOF driving system

θ i :

Rotational angles of the first revolute pair in the ith limb (i = 1, 2)

\({{\dot \theta }_{ij}}\) :

Intensity associated with the jth revolute joint in the ith limb (i = 1, 2, and j = 1, 2)

$ P :

Instantaneous twist of the end effector

$ ij :

Unit screw of the jth joint in the ith limb (i = 1, 2, and j = 1, 2, …, 4)

$ rij :

jth reciprocal wrench in the ith limb (i = 1, 2, and j = 1, 2)

γ i :

Rotational angle of the cylindrical joint in the ith limb (i = 1, 2, 3)

φ i :

Angle between links AiBi and BiCi (i = 1, 2, 3)

References

  1. Stewart D. A platform with six degrees of freedom. Proceedings of the Institution of Mechanical Engineers, 1965, 180(1): 371–386

    Article  Google Scholar 

  2. St-Onge B M, Gosselin C M. Singularity analysis and representation of the general Gough-Stewart platform. The International Journal of Robotics Research, 2000, 19(3): 271–288

    Article  Google Scholar 

  3. Tong Z Z, Gosselin C, Jiang H Z. Dynamic decoupling analysis and experiment based on a class of modified Gough-Stewart parallel manipulators with line orthogonality. Mechanism and Machine Theory, 2020, 143: 103636

    Article  Google Scholar 

  4. You J J, Xi F F, Shen H P, Wang J Y, Yang X L. A novel Stewart-type parallel mechanism with topological reconfiguration: design, kinematics and stiffness evaluation. Mechanism and Machine Theory, 2021, 162: 104329

    Article  Google Scholar 

  5. Akçali I D, Mutlu H. A novel approach in the direct kinematics of Stewart platform mechanisms with planar platforms. Journal of Mechanical Design, 2006, 128(1): 252–263

    Article  Google Scholar 

  6. Jin X D, Fang Y F, Zhang D, Luo X L. Design and analysis of a class of redundant collaborative manipulators with 2D large rotational angles. Frontiers of Mechanical Engineering, 2020, 15(1): 66–80

    Article  Google Scholar 

  7. Wang L, Fang Y F, Li L Q. Design and analysis of the gripper mechanism based on generalized parallel mechanisms with configurable moving platform. Frontiers of Mechanical Engineering, 2021, 16(4): 765–781

    Article  Google Scholar 

  8. Tian C X, Zhang D. A new family of generalized parallel manipulators with configurable moving platforms. Mechanism and Machine Theory, 2020, 153: 103997

    Article  Google Scholar 

  9. Tian C X, Zhang D. Design and analysis of novel kinematically redundant reconfigurable generalized parallel manipulators. Mechanism and Machine Theory, 2021, 166: 104481

    Article  Google Scholar 

  10. Clavel R. DELTA, a fast robot with parallel geometry. In: Proceedings of the 18th International Symposium on Industrial Robots. New York: Springer, 1988, 91–100

    Google Scholar 

  11. Laribi M A, Romdhane L, Zeghloul S. Analysis and dimensional synthesis of the Delta Robot for a prescribed workspace. Mechanism and Machine Theory, 2007, 42(7): 859–870

    Article  MATH  Google Scholar 

  12. Dastjerdi A H, Sheikhi M M, Masouleh M T. A complete analytical solution for the dimensional synthesis of 3-DOF Delta parallel robot for a prescribed workspace. Mechanism and Machine Theory, 2020, 153: 103991

    Article  Google Scholar 

  13. Stock M, Miller K. Optimal kinematic design of spatial parallel manipulators: application to linear Delta Robot. Journal of Mechanical Design, 2003, 125(2): 292–301

    Article  Google Scholar 

  14. Liu X J, Wang J S, Oh K K, Kim J W. A new approach to the design of a Delta Robot with a desired workspace. Journal of Intelligent & Robotic Systems, 2004, 39(2): 209–225

    Article  Google Scholar 

  15. Silva V G, Tavakoli M, Marques L. Optimization of a three degrees of freedom Delta manipulator for well-conditioned workspace with a floating point genetic algorithm. International Journal of Natural Computing Research, 2014, 4(4): 1–14

    Article  Google Scholar 

  16. Di Gregorio R. Kinematics of the translational 3-URC mechanism. Journal of Mechanical Design, 2004, 126(6): 1113–1117

    Article  Google Scholar 

  17. Tsai L W, Walsh G C, Stamper R E. Kinematics of a novel three DOF translational platform. In: Proceedings of IEEE International Conference on Robotic and Automation. Minncapolis: IEEE, 1996, 3446–3451

    Chapter  Google Scholar 

  18. Tsai L W. Kinematics of a three-DOF platform with three extensible limbs. In: Lenarčič J, Parenti-Castelli V, eds. Recent Advances in Robot Kinematics. Dordrecht: Springer, 1996, 401–410

    Chapter  Google Scholar 

  19. Li Y M, Xu Q S. Kinematic analysis and design of a new 3-DOF translational parallel manipulator. Journal of Mechanical Design, 2006, 128(4): 729–737

    Article  Google Scholar 

  20. Stan S D, Balan R, Maties V, Teutan E, Vlad T. Design and control simulation of ISOGLIDE3 parallel robot. In: Proceedings of the 8th Conference on Applied Informatics and Communications. Rhodes, 2008, 272–275

  21. Ganesh S S, Koteswara Rao A B, Darvekar S. Multi-objective optimization of a 3-DOF translational parallel kinematic machine. Journal of Mechanical Science and Technology, 2013, 27(12): 3797–3804

    Article  Google Scholar 

  22. Callegari M, Tarantini M. Kinematic analysis of a novel translational platform. Journal of Mechanical Design, 2003, 125(2): 308–315

    Article  Google Scholar 

  23. Yu W D, Wang H, Chen G L. Design and kinematic analysis of a 3-translational-DOF spatial parallel mechanism based on polyhedral. Mechanism and Machine Theory, 2018, 121: 92–115

    Article  Google Scholar 

  24. Chablat D, Wenger P. Architecture optimization of a 3-DOF translational parallel mechanism for machining applications, the orthoglide. IEEE Transactions on Robotics and Automation, 2003, 19(3): 403–410

    Article  Google Scholar 

  25. Yu J J, Dai J S, Bi S S, Zong G H. Numeration and type synthesis of 3-DOF orthogonal translational parallel manipulators. Progress in Natural Science, 2008, 18(5): 563–574

    Article  MathSciNet  Google Scholar 

  26. Shen H P, Chablat D, Zeng B X, Li J, Wu G L, Yang T L. A translational three-degrees-of-freedom parallel mechanism with partial motion decoupling and analytic direct kinematics. Journal of Mechanisms and Robotics, 2020, 12(2): 021112

    Article  Google Scholar 

  27. Zou Q, Zhang D, Luo X L, Huang G Y, Li L J, Zhang H Q. Enumeration and optimum design of a class of translational parallel mechanisms with prismatic and parallellelogram joints. Mechanism and Machine Theory, 2020, 150: 103846

    Article  Google Scholar 

  28. Karimi Eskandary P, Angeles J. The virtual screw: concept, design and applications. Mechanism and Machine Theory, 2018, 128: 349–358

    Article  Google Scholar 

  29. Hervé J M. Structural analysis of mechanisms by displacement group. Mechanism and Machine Theory, 1978, 13(4): 437–450 (in French)

    Article  Google Scholar 

  30. Li Q C, Huang Z, Hervé J M. Displacement manifold method for type synthesis of lower-mobility parallel mechanisms. Science in China Series E: Technological Sciences, 2004, 47(6): 641–650

    Article  Google Scholar 

  31. Tsai L W. Robot Analysis: The Mechanics of Serial and Parallel Manipulators. New York: John Wiley & Sons, Inc., 1999

    Google Scholar 

  32. Kong X W, Gosselin C M. Kinematics and singularity analysis of a novel type of 3-CRR 3-DOF translational parallel manipulator. The International Journal of Robotics Research, 2002, 21(9): 791–798

    Article  Google Scholar 

  33. Liu Z H, Niu J C, Zhou Y Q. Kinematics and singularity analysis of 3-CRR parallel mechanism. Journal of Central South University (Science and Technology), 2017, 48(5): 1190–1197

    Google Scholar 

  34. Rodriguez-Leal E, Dai J S, Pennock G R. Screw-system-based mobility analysis of a family of fully translational parallel manipulators. Mathematical Problems in Engineering, 2013, 2013: 262801

    Article  MathSciNet  Google Scholar 

Download references

Acknowledgements

This research work was supported by the Fundamental Research Funds for the Central Universities, China (Grant No. 2020YJS153) and the National Natural Science Foundation of China (Grant No. 51975039). Then, the first author would like to acknowledge the China Scholarship Council (Grant No. 202007090138) for financial support and the use of the research facilities at Lassonde School of Engineering at York University, Canada.

Author information

Authors and Affiliations

  1. Department of Mechanical Engineering, Beijing Jiaotong University, Beijing, 100044, China

    Lin Wang, Yuefa Fang & Luquan Li

  2. Department of Mechanical Engineering, Lassonde School of Engineering, York University, Toronto, ON, M3J 1P3, Canada

    Lin Wang & Dan Zhang

Authors
  1. Lin Wang
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Yuefa Fang
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Dan Zhang
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Luquan Li
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Yuefa Fang.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Wang, L., Fang, Y., Zhang, D. et al. Design and analysis of partially decoupled translational parallel mechanisms with single-loop structures. Front. Mech. Eng. 17, 39 (2022). https://doi.org/10.1007/s11465-022-0695-1

Download citation

  • Received:

  • Accepted:

  • Published:

  • DOI: https://doi.org/10.1007/s11465-022-0695-1

Keywords

Search

Navigation