Abstract
This paper introduces the design and manufacturing technology of aerospace microelectromechanical systems (MEMS) characterized by high performance, multi-variety, and small batch. Moreover, several kinds of special MEMS devices with high precision, high reliability, and environmental adaptability, as well as their typical applications in the fields of aeronautics and aerospace, are presented.
Similar content being viewed by others
References
Chang H, Yuan W. Pan-structured MEMS Integrated Design Method. Xi’an: Northwestern Polytechnical University Press, 2010 (in Chinese)
Yuan W, Chang H, Li W, et al. Application of an optimization methodology for multidisciplinary system design of microgyroscopes. Microsystem Technologies, 2006, 12(4): 315–323
Xu J, Yuan W, Chang H, et al. Angularly parameterized macromodel extraction for unconstrained microstructures. Journal of Micromechanics and Microengineering, 2008, 18(11): 115034
Qiao D, Chen X, Ren Y, et al. A micro nuclear battery based on SiC Schottky barrier diode. Journal of Microelectromechanical Systems, 2011, 20(3): 685–690
Yuan W, Chang H, Li W, et al. Application of an optimization methodology for multidisciplinary system design of microgyroscopes. Microsystem Technologies, 2006, 12(4): 315–323
Yu Y, Yuan W, Qiao D. Electromechanical characterization of a new micro programmable blazed grating by laser Doppler vibrometry. Microsystem Technologies, 2009, 15(6): 853–858
Chang H, Xie J, Fu Q, et al. Micromachined inertial measurement unit fabricated by a SOI process with selective roughening under structures. Micro & Nano Letters, 2011, 6(7): 486–489
Ma B, Ren J, Deng J, et al. Flexible thermal sensor array on PI film substrate for underwater applications. In: Proceedings of the 2010 IEEE 23rd International Conference on Micro Electro Mechanical Systems (MEMS). IEEE, 2010, 679–682
Lv H, Jiang C, Xiang Z, et al. Design of a micro floating element shear stress sensor. Flow Measurement and Instrumentation, 2013, 30: 66–74
Ren S, Yuan W, Qiao D, et al. A micromachined pressure sensor with integrated resonator operating at atmospheric pressure. Sensors, 2013, 13(12): 17006–17024
Wang S, Ma B, Deng J, et al. Fabrication and characterization of MEMS piezoelectric synthetic jet actuators with bulk-micromachined PZT thick film. Microsystem Technologies, 2015, 21(5): 1053–1059
Xia C, Qiao D, Zeng Q, et al. The squeeze-film air damping of circular and elliptical micro-torsion mirrors. Microfluidics and Nanofluidics, 2015, 19(3): 585–593
Ma B, Ma C. A MEMS surface fence for wall shear stress measurement with high sensitivity. Microsystem Technologies, 2016, 22(2): 239–246
Acknowledgements
The author sincerely thanks all the researchers and postgraduates who participated in the corresponding projects in the Micro- Nano System Laboratory of NWPU. The author is also grateful for the support given by the National Natural Science Foundation, the Ministry of Science and Technology, the Army General Armaments Department, and the State Administration for Science and Technology for National Defense.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Yuan, W. Development and application of high-end aerospace MEMS. Front. Mech. Eng. 12, 567–573 (2017). https://doi.org/10.1007/s11465-017-0424-3
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11465-017-0424-3