Abstract
The main aim of this study is to examine the effect of incorporating limestone fine (LF) on chemical shrinkage of pastes and mortars. For this purpose, five paste and five mortar mixes were prepared with 0, 5, 10, 15, and 20% (by weight) LF as a replacement of cement. The water-to-binder (w/b) ratio was 0.45 for all mixes. The sand-to-binder (s/b) ratio in the mortar mixes was 2. Testing included chemical shrinkage, compressive strength, density, and ultrasonic pulse velocity (UPV). Chemical shrinkage was tested each hour for the first 24 h, and thereafter each 2 days until a total period of 90 days. Furthermore, compressive strength and UPV tests were conducted at 1 day, 7, 28, and 90 days of curing. The results show that the long-term chemical shrinkage of pastes was found to increase with the increase in LF content up to 15%. Beyond this level of replacement, the chemical shrinkage started to decrease. However, the chemical shrinkage for mortars increased with the increase in LF content up to 10% LF and a decrease was observed beyond this level. It was also noticed that compressive strength for pastes and mortars attained the highest value for mixes containing 10 and 15% LF. The trend in the UPV results is somewhat similar to those of strength. Density for pastes and mortars increased up to 15% LF followed by a decrease at 20% replacement level. Correlations between the various properties were conducted. It was found that an increase in chemical shrinkage led to an increase in compressive strength.
Similar content being viewed by others
Data availability
The datasets generated during and/or analyzed during the current study are available from the corresponding author on reasonable request.
References
Adel Mohammed Z, Burhan Abdurrahman R, Ahmad AH (2010) Influence of limestone powder as partial replacement of cement on concrete and the effect of high temperature on it. Al-Rafidain Eng J (AREJ) 18–5:24–34. https://doi.org/10.33899/rengj.2010.32863
Al-Swaidani A (2017) Production of more durable and sustainable concretes using volcanic scoria as cement replacement. Mater Constr 67–326:e118–e118. https://doi.org/10.3989/mc.2017.00716
Al-Swaidani A, Soud A, Hammami A (2017) Improvement of the early-age compressive strength, water permeability, and sulfuric acid resistance of scoria-based mortars/concrete using limestone filler. Adv Mater Sci Eng. https://doi.org/10.1155/2017/8373518
Anusha P, Ramya K (2018) Experimental study on concrete with limestone powder and copper slag. Int J Eng Res Manag (IJERM) 5–9:2349–2058
ASTM C 1608 (2007) Standard test method for chemical shrinkage of hydraulic cement paste. American Society for Testing and Materials, West Conshohocken
ASTM C188–14 (2014) Standard test method for density of hydraulic cement. Annual Book of ASTM standards. ASTM International, West Conshohocken
ASTM C109 (2016) Standard test method for compressive strength of hydraulic cement mortars (using 2-in. or [50mm] cube specimens. ASTM International, West Conshohocken
ASTM C597 (2016) Standard method for pulse velocity through concrete. ASTM International, West Conshohocken
Baalbaki O, Elkordi A, Ghanem H, Machaka M, Khatib JM (2019) Properties of concrete made of fine aggregates partially replaced by incinerated municipal solid waste bottom ash. Acad J Civil Eng 37(2):532–538. https://doi.org/10.26168/icbbm2019.77
Beltzung F, Wittmann FH (2000) Dissolution of cement and early chemical shrinkage of cement paste. RILEM publications, Switzerland, pp 91–97
Benabed B, Soualhi H, Belaidi AS, Azzouz L, Kenai S (2016) Effect of limestone powder as a partial replacement of crushed quarry sand on properties of self-compacting repair mortars. J Build Mater Struct 3–1:5–30. https://doi.org/10.5281/ZENODO.242480
Bentz DP (2006) Modeling the influence of limestone filler on cement hydration using CEMHYD3D. Cement Concr Compos 8–2:124–129. https://doi.org/10.1016/j.cemconcomp.2005.10.006
Bentz DP, Irassar EF, Bucher BE, Weiss WJ (2009) Limestone fillers conserve cement, part 2: durability issues and the effects of limestone fineness on the mixtures. ACI Concrete Int 31–12:35–39
Bonavetti V, Donza H, Rahhal V, Irassar E (2000) Influence of initial curing on the properties of concrete containing limestone blended cement. Cem Concr Res 30:703–708. https://doi.org/10.1016/S0008-8846(00)00217-9
Bouasker M, Mounanga P, Turcry P, Loukili A, Khelidj A (2008) Chemical shrinkage of cement pastes and mortars at very early age: effect of limestone filler and granular inclusions. Cement Concr Compos 30–1:13–22. https://doi.org/10.1016/j.cemconcomp.2007.06.004
Charron JP, Marchand J, Bissonnette B (2001) Early-age deformations of hydrating cement systems: comparison of linear and volumetric shrinkage measurements. Concr Sci Eng 3:168–173
Charron JP, Marchand J, Bissonnette B, Pigeon M, Zuber B (2002) Comparative study of the effects of water/binder ratio and silica fume on the volume instability of hydrating cement pastes at early-age. In: Persson B, Fagerlund G (Eds) Proceedings of the 3rd International Research Seminar on Self Desiccation and Its Importance in Concrete Technology, Lund, Sweden. Lund University, Lund, pp 39–50
Du Kh, Dai Pang S (2020) High-performance concrete incorporating calcined kaolin clay and limestone as cement substitute. Constr Build Mater 264:120152. https://doi.org/10.1016/j.conbuildmat.2020.120152
Geiker M, Knudsen T (1982) Chemical shrinkage of Portland cement pastes. Cement Concr Compos 12–5:603–610. https://doi.org/10.1016/0008-8846(82)90021-7
Ghanem H, Khatib J, Elkordi A (2020) Effect of partial replacement of sand by MSWI-BA on the properties of mortar. BAU J Sci Technol 1(2):4
Ghanem H, Machaka M, Khatib J, Elkordi A, Baalbaki O (2019) Effect of palm fibres addition on absorption characteristics and mechanical properties of concrete. The fifth International Conference on Sustainable Construction Materials and Technologies (SCMT5), Kingston University, London, UK, 14–17 July 2019.
Güneyisi E, Gesoglu M, Özturan T, Mermerdas K, Özbay E (2011) Properties of mortars with natural pozzolana and limestone-based blended cements. ACI Mater J 108–5:493–500
Hammer TA, Heese C (1999) Early age chemical shrinkage and autogenous deformation of cement pastes. In: Proceedings of the 2nd International Seminar on Self-Desiccation and Its Importance in Concrete Technology, Lund University, Lund, Sweden, pp. 7–13.
Heikal H, El-Didamony H, Morsy MS (2000) Limestone-filled pozzolanic cement. Cem Concr Res 30:1827–1834. https://doi.org/10.1016/S0008-8846(00)00402-6
Justnes H, Sellevold EJ, Reyniers B, Van Loo D, Van Gemert A, Verboven F, Van Gemert D (2000) Chemical shrinkage of cement pastes with plasticizing admixtures. Nordic Concr Res 24:39–44
Justnes H, Reyniers B, Sellevold EJ (1994) An evaluation of methods for measuring chemical shrinkage of cementitious pastes. Nordic Concr Res 14–1:45–61
Justnes H, Van Gemert A, Verboven F, Sellevold EJ (1996) Total and external chemical shrinkage of low w/c ratio cement pastes. Adv Cem Res 8–31:121–126. https://doi.org/10.1680/adcr.1996.8.31.121
Justnes H, Ardoullie B, Hendrix E, Sellevold EJ, Van Gemert D (1998) The chemical shrinkage of pozzolanic reaction products. Special Public 178:191–206
Justnes H, Sellevold EJ, Reyniers B, Van Loo D, Van Gemert A, Verboven F, Van Gemert D (1999) The influence of cement characteristics on chemical shrinkage. Autogenous Shrinkage of Concrete. E&FN Spon, London, pp 71–80
Khatib JM (2005) Properties of concrete incorporating fine recycled aggregate. Cem Concr Res 35(4):763–769. https://doi.org/10.1016/j.cemconres.2004.06.017
Khatib JM (2008) Metakaolin concrete at a low water to binder ratio. Constr Build Mater 22(8):1691–1700. https://doi.org/10.1016/j.conbuildmat.2007.06.003
Khatib JM (2009) Low temperature curing of metakaolin concrete. ASCE, J Mater Civil Eng 21(8):362–367. https://doi.org/10.1061/(ASCE)0899-1561(2009)21:8(362)
Khatib J, Ramadan R, Ghanem H, Elkordi A (2021) Volume stability of cement paste containing limestone fines. Buildings 8:366. https://doi.org/10.3390/buildings11080366
Kovler K, Zhutovsky S (2006) Overview and future trends of shrinkage research. Mater Struct 39–9:827–847
Le Chatelier H (1900) Sur les Changements de Volume Qui Accompagnent le Durcissement des Ciments. Bull Soc De L’encourag Pour L’indust Natl 5–5:54–57
Liao Y, Wei X (2014) Relationship between chemical shrinkage and electrical resistivity for cement pastes at early age. J Mater Civ Eng 26–2:384–387. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000851
Livesey P (1991) Strength characteristics of Portland-limestone cements. Constr Build Mater 5–3:147–150. https://doi.org/10.1016/0950-0618(91)90065-S
Lothenbach B, Saout GL, Gallucci E, Scrivener K (2008) Influence of limestone on the hydration of Portland cements. Cem Concr Res 38:48–860. https://doi.org/10.1016/j.cemconres.2008.01.002
Lu T, Li Z, Huang H (2020) Effect of supplementary materials on the autogenous shrinkage of cement paste. Materials 13–15:3367. https://doi.org/10.3390/ma13153367
Lura P (2003) Autogenous deformation and internal curing of concrete. http://resolver.tudelft.nl/uuid:1a1efc2d-a638-4787-b543-5bd643a39a4b (accessed on Jun 15–2021).
Machaka M, Elkordi A, Ghanem H, Khatib J, Baalbaki O (2019) Selected properties of concrete containing palm fibers. Acad J Civ Eng 37(2):279–286. https://doi.org/10.26168/icbbm2019.40
Machaka M, Khatib J, Elkordi A, Ghanem H, Baalbaki O (2019b) Selected properties of concrete containing Municipal Solid Waste Incineration Bottom Ash (MSWI-BA). In Proceedings of the 5th International Conference on Sustainable Construction Materials and Technologies (SCMT5), London, UK :14–17.
Markandeya A, Mapa DG, Fincan M, Shanahan N, Stetsko YP, Riding KA, Zayed A (2019) Chemical shrinkage and cracking resilience of metakaolin concrete. ACI Mater J 116(4):51716714. https://doi.org/10.14359/51716714
Matschei T, Lothenbach B, Glasser FP (2007) The role of calcium carbonate in cement hydration. Cem Concr Res 37:551–558. https://doi.org/10.1016/j.cemconres.2006.10.013
Meddah MS, Lmbachiya MC, Dhir RK (2014) Potential use of binary and composite limestone cements in concrete production. Constr Build Mater 58:193–205. https://doi.org/10.1016/j.conbuildmat.2013.12.012
Menadi B, Kenai S, Khatib J.M, Ait-Mokhtar A (2009) Strength development and prediction of mortars containing limestone fines. SBEIDCO, 1st International Conference on Sustainable Built Environment Infrastructures in Developing Countries ENSET Oran (Algeria): 91–98.
Menendez G, Bonavetti V, Irassar EF (2003) Strength development of ternary blended cement with limestone filler and blast-furnace slag. Cement Concr Compos 25:61–67. https://doi.org/10.1016/S0958-9465(01)00056-7
Persson B (1997) Experimental studies of the effect of silica fume on chemical shrinkage and self-desiccation in Portland cement mortars. Self-Desiccation and its importance in Concrete Technology. Lund, Lund university:116–131.
Safiuddin M, Kaish AB, Woon CO, Raman SN (2018) Early-age cracking in concrete: causes, consequences, remedial measures, and recommendations. Appl Sci 8–10:1730. https://doi.org/10.3390/app8101730
Soroka I, Stern N (1976) Calcareous fillers and the compressive strength of Portland cement. Cem Concr Res 6–3:367–376. https://doi.org/10.1016/0008-8846(76)90099-5
Tazawa EI, Miyazawa ES, Kasai T (1995) Chemical shrinkage and autogenous shrinkage of hydrating cement paste. Cem Concr Res 25–2:288–292. https://doi.org/10.1016/0008-8846(95)00011-9
Thongsanitgarn P, Wongkeo W, Sinthupinyo S, Chaipanich A (2012) Effect of limestone powders on compressive strength and setting time of Portland-limestone cement pastes. In Advanced Materials Research 343:322–326. Trans Tech Publications Ltd. https://doi.org/10.4028/www.scientific.net/AMR.343-344.322
Tsivilis S, Batis G, Chaniotakis E, Gr G, Theodossis D (2000) Properties and behavior of limestone cement concrete and mortar. Cem Concr Res 30:1679–1683. https://doi.org/10.1016/S0008-8846(00)00372-0
Voglis N, Kakali G, Chaniotakis E, Tsivilis S (2005) Portland-limestone cements. Their properties and hydration compared to those of other composite cements. Cement Concr Compos 27–2:191–196. https://doi.org/10.1016/j.cemconcomp.2004.02.006
Wang C, Wang YW, Pu XC (2010) Autogenous shrinkage characteristics and mechanism of ultra-low water cement concrete. Journal of Building Materials 1:75–79. https://doi.org/10.3969/j.issn.1007-9629.2010.01.016
Wang D, Shi C, Farzadnia N, Shi Z, Jia H (2018a) A review on effects of limestone powder on the properties of concrete. Constr Build Mater 192:153–166. https://doi.org/10.1016/j.conbuildmat.2018.10.119
Wang D, Shi C, Farzadnia N, Shi Z, Jia H, Ou Z (2018b) A review on use of limestone powder in cement-based materials: mechanism, hydration and microstructures. Construction Building Materials 181:659–672. https://doi.org/10.1016/j.conbuildmat.2018.06.075
Wang J, Cheng Y, Yuan L, Xu D, Du P, Hou P, Zhou Z, Cheng X, Liu S, Wang Y (2020) Effect of nano-silica on chemical and volume shrinkage of cement-based composites. Constr Build Mater 247:118529. https://doi.org/10.1016/j.conbuildmat.2020.118529
Weerdt KD, Justnes H, Kjellsen KO (2010) Fly ash–limestone ternary composite cements: synergetic effect at 28 days. Nordic Concrete Research 42–2:51–70
Weerdt KD, Haha MB, Le Saout G, Kjellsen KO, Justnes H, Lothenbach B (2011) Hydration mechanisms of ternary Portland cements containing limestone powder and fly ash. Cement and Concrete research 41–3:279–291. https://doi.org/10.1016/j.cemconres.2010.11.014
Wild S, Khatib JM, Roose LJ (1998) Chemical shrinkage and autogenous shrinkage of Portland cement-metakaolin pastes. Adv Cem Res 10–3:109–119. https://doi.org/10.1680/adcr.1998.10.3.109
Zhang Z, Scherer GW (2020) Measuring chemical shrinkage of ordinary Portland cement pastes with high water-to-cement ratios by adding cellulose nanofibrils. Cement Concr Compos 111:103625. https://doi.org/10.1016/j.cemconcomp.2020.103625
Zhang J, Weissinger EA, Peethamparan S, Scherer GW (2010) Early hydration and setting of oil well cement. Cem Concr Res 40–7:1023–1033. https://doi.org/10.1016/j.cemconres.2010.03.014
Zhang T, Gao P, Luo R, Guo Y, Wei J, Yu Q (2013) Measurement of chemical shrinkage of cement paste: comparison study of ASTM C 1608 and an improved method. Constr Build Mater 48:662–669. https://doi.org/10.1016/j.conbuildmat.2013.07.086
Zhutovsky S, Kovler K (2008) Revised view on chemical shrinkage, In International Conference on Microstructure Related Durability of Cementitious Composites: 775–784.
Zhutovsky S, Kovler K (2010) Chemical shrinkage of high-strength/high-performance cementitious materials. Int Rev Civil Eng 1:110–118. https://doi.org/10.15866/ireche.v10i1.15794
Acknowledgements
The authors gratefully acknowledge the support received from the staff and technicians working at BAU Laboratories.
Author information
Authors and Affiliations
Contributions
Conceptualization, J.K.; methodology, R.R.; formal analysis, R.R.; writing-original draft preparation, R.R. and H.G.; writing-review and editing, J.K., H.G., and A.E.; supervision, J.K. and A.E.; project administration, H.G. All authors read and approved the final manuscript.
Corresponding author
Ethics declarations
Ethics approval and consent to participate
Not applicable.
Consent for publication
Not applicable.
Competing interests
The authors declare no competing interests.
Additional information
Responsible Editor: Philippe Garrigues
Publisher's note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Khatib, J., Ramadan, R., Ghanem, H. et al. Effect of using limestone fines on the chemical shrinkage of pastes and mortars. Environ Sci Pollut Res 30, 25287–25298 (2023). https://doi.org/10.1007/s11356-022-18496-5
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11356-022-18496-5