Abstract
This paper addresses the problem of the localization of contamination sources after deliberate contaminations in drinking water distribution systems (DWDS). The proposed methodology is based on the information given by successive positive readings of sensors. Thus, it is possible to estimate the localization of the contamination sources based on only the first sensor that detected a contamination, and then update the results when more information is available. From the tests performed on a real drinking water distribution system, it was possible to observe that as new sensors detect changes in contaminant concentration, other possible contaminations may be detected and the location of contamination sources may be more restricted. The results achieved for the two set of sensors considered in the study contained the correct locations and the instants of contaminations previously simulated. Two case studies were also analysed to study the effect of the occurrence of false positives. It was concluded that it is not always possible to verify the occurrence of those anomalies and when it is verified, it is not possible to distinguish between a false positive and a false negative. The occurrence of false positives did not affect also the results related with the real detections.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
De Sanctis AE, Shang F, Uber JG (2010) Real-time identification of possible contamination sources using network backtracking methods. J Water Resour Plan Manag 136(4):444–453
Di Nardo A, Di Natale M, Guida M, Musmarra D (2012) Water network protection from intentional contamination by sectorization. Water Resour Manag. doi:10.1007/s11269-012-0133-y
Guan J, Aral MM, Maslia ML, Grayman WM (2006) Identification of contaminant sources in water distribution systems using simulation-optimization method: case study. J Water Resour Plan Manag 132(4):252–262
Hill J, van Bloemen Waanders BG, Laird CD (2006) Source inversion with uncertain sensor measurements. 8th Annual Water Distribution systems Analysis Symposium, Cincinnati, Ohio
Kim M, Choi CY, Gerba CP (2008) Source tracking of microbial intrusion in water systems using artificial neural networks. Water Res 42:1308–1314
Laird CD, Biegler LT, van Bloemen Waanders BG (2006) Mixed integer approach for obtaining unique solutions in source inversion of water networks. J Water Resour Plan Manag 132(4):242–251
Laird CD, Biegler LT, van Bloemen Waanders BG, Bartlett RA (2005) Contamination source determination for water networks. J Water Resour Plan Manag 131(2):125–134
Mann AV, McKenna SA, Hart WE, Laird CD (2012) Real-time inversion in large-scale water networks using discrete measurements. Comput Chem Eng 37:143–151
Mou L, Menglin W, Jie L, Shen D (2010) Investigation on backward tracking of contamination sources in a water supply sytems – case study. 2010 2nd Conference on Environmental Science and Information Application Technology
Preis A, Ostfeld A (2006) Contamination source identification in water systems: a hybrid model trees-linear programming scheme. J Water Resour Plan Manag 132(4):263–273
Preis A, Ostfeld A (2011) Hydraulic uncertainty inclusion in water distribution systems contamination source identification. Urban Water J 8(5):267–277
Propato M, Sarrazy F, Tryby M (2010) Linear algebra and minimum relative entropy to investigate contamination events in drinking water distribution systems. J Water Resour Plan Manag 136(4):483–492
Rossman LA, Boulos PF, Altman T (1993) Discrete volume-element method for network water-quality models. J Water Resour Plan Manag 119:505–517
Rossman LA, Grayman WM (1999) Scale-model studies of mixing in drinking water storage tanks. J Environ Eng 125:755–761
Rossman LA (2000) EPANET users manual. National Risk Management Research Laboratory, Office of Research and Development, United States Environmental Protection Agency, Cincinnati
Shang F, Uber JG, Plycarpou MM (2002) Particle backtracking algorithm for water distribution system analysis. J Environ Eng 128(5):441–450
van Bloemen Waanders BG, Bartlett RA, Laird CD, Biegler LT (2003) Nonlinear strategies for source detection of municipal water networks. EWRI Conference, Philadelphia 2003
Zechman EM, Ranjithan SR (2009) Evolutionary computation-based methods for characterizing contaminant sources in a water distribution system. J Water Resour Plan Manag 135(5):334–343
Zierolf ML, Plycarpou MM, Uber JG (1998) Development and autocalibration of an input–output model of chlorine transport in drinking water distribution systems. IEEE Trans Control Syst Technol 6(4):543–552
Acknowledgments
The research leading to these results has received funding from the European Community’s Seventh Framework Programme (FP7/2007-2011) under grant agreement n° 217976 {Project “SecurEau”}.
The authors are thankful for the fruitful discussions with Dr. Talis Juhna from the Riga Technical University, Latvia.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Costa, D.M., Melo, L.F. & Martins, F.G. Localization of Contamination Sources in Drinking Water Distribution Systems: A Method Based on Successive Positive Readings of Sensors. Water Resour Manage 27, 4623–4635 (2013). https://doi.org/10.1007/s11269-013-0431-z
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11269-013-0431-z