Abstract
ZrO2 nanotube arrays were prepared by the anodization method in a mixture of formamide and glycerol (volume ratio = 1:1) containing 1 wt% NH4F and 1 wt% H2O. The catalysts were obtained through the impregnation of zirconia nanotubes with zirconium sulfate aqueous solution followed by calcinating in air at high temperature. The morphology and structure of the nanotubes and catalysts were characterized through scanning electron microscopy, X-ray diffraction, and infrared spectra analysis. Various factors that affect the catalytic activity were investigated in detail. An esterification conversion percentage of 97.6% was achieved for the catalyst prepared with zirconia supports which were pretreated at 500 °C, followed by loading 65% Zr(SO4)2 and calcinating at 400 °C.
Similar content being viewed by others
References
Sohn JR, Seo DH (2003) Catal Today 87:219–226
Zhang JC, Meng X, Cao W (2006) Chin J Catal 27:135–138
Juan JC, Zhang JC, Jiang Y, Meng X, Cao W, Yarmo MA (2007) Catal Lett 117:153–158
Juan JC, Zhang J, Yarmo MA (2007) Appl Catal A 332:209–215
Jiang Y, Juan JC, Meng X, Meng X, Cao W, Yarmo MA, Zhang JC (2007) Chem Res Chin Univ 23:349–354
Juan JC, Zhang J, Yarmo MA (2008) Appl Catal A Gen 347:133–141
Juan JC, Jiang Y, Meng X, Cao W, Yarmo MA, Zhang JC (2007) Mater Res Bull 42:1278–1285
Yamamoto N, Sato S, Takahashi R, Inui K (2006) J Mol Catal A Chem 243:52–59
Szizybalski A, Girgsdies F, Rabis A (2005) J Catal 233:297–307
Petchmala A, Laosiripojana N, Jongsomjit B, Goto M, Panpranot J, Mekasuwandumrong O, Shotipruk A (2010) Fuel 89:2387–2392
Takahashi N, Suda A, Hachisuka I, Sugiura M, Sobukawa H, Shinjoh H (2007) Appl Catal B 72:187–195
Lucas N, Bordoloi A, Amrute AP, Kasinathan P, Vinu A, Bohringer W, Fletcher JCQ, Halligudi SB (2009) Appl Catal A 352:74–80
Peng BX, Shu Q, Wang JF, Wang GR, Wang DZ, Han MH (2008) Process Saf Environ 86:441–447
Lo CC, Hung CH, Yuan CS, Wu JF (2007) Sol Energ MaterSol C 91:1765–1774
Liu XM, Lu GQ, Yan ZF (2005) Appl Catal A 279:241–245
Tsuchiya H, Macak JM, Taveira L, Schmuki P (2005) Cheml Phys Lett 410:188–191
Zhao J, Xu R, Wang X, Li Y (2008) Corros Sci 50:1593–1597
Zhao J, Wang X, Xu R, Meng F, Guo L, Li Y (2008) Mater Lett 62:4428–4430
Ganapati DY, Jayesh JN (1999) Micropor Mesopor Mat 33:1–48
Guo L, Zhao J, Wang X, Xu X, Liu H, Li Y (2009) Int J Appl Ceram Technol 6:636–641
Juan JC, Zhang J, Jiang Y, Caoa W, Yarmo MA (2007) J Mol Catal A 272:91–95
Acknowledgments
This work was supported by National Natural Science Foundation of China (No. 50972036) and Support Program for Hundred Excellent Innovation Talents from the Universities and Colleges of Hebei Province.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Wang, X., Zhao, J., Hou, X. et al. Preparation and properties of zirconia nanotube-supported zirconium sulfate catalyst. Reac Kinet Mech Cat 104, 227–234 (2011). https://doi.org/10.1007/s11144-011-0344-x
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11144-011-0344-x