The microstructure of self-fluxing Ni – Cr – Si – B coatings formed on steel plates with the use of non-vacuum electron-beam cladding is studied. The effect of the structure and phase composition of the coatings on the level of their hardness is determined.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
O. I. Shevchenko, Control of Structure, composition and Properties of Coatings under Plasma Cladding Due to Technological Impacts, Author’s Abstract of Doctoral’s Thesis [in Russian], Nizhny Tagil (2006).
I. Hemmati, V. Ocelik, and J. T. M. De Hosson, “Advances in laser surface engineering: tackling the cracking problem in laser-deposited Ni – Cr – B – Si – C alloys,” JOM, 65(6), 741 – 748 (2103).
D. Chaliampalias, G. Vourlias, E. Pavlidou, et al., “Comparative examination of the microstructure and high temperature oxidation performance of NiCrBSi flame sprayed and pack cementation coatings,” Appl. Surf. Sci., 255(6), 3605 – 3612 (2009).
L. G. Voroshnin, F. I. Panteleenko, and V. M. Konstantinov, Theory and Practice of Deposition of Protective Coatings with the Help of TCT [in Russian], FTI, Minsk (2001), 148 p.
I. Hemmati, V. Ocelik, and J. T. M. De Hosson, “Evolution of microstructure and properties in laser cladding of a Ni – Cr – B – Si hardfacing alloy,” Contact Mech. Surf. Treat., 10, 287 – 296 (2011).
E. E. Kornienko, A. A. Nikulina, N. S. Belousova, et al., “Structural features of Ni – Cr – Si – B materials obtained by different technologies,” IOP Conf. Ser.: Mater. Sci. Eng, IOP Publishing, 156(1), 012020 (2016).
E. E. Kornienko, E. J. Lapushkina, V. I. Kuzmin, et al., “Air plasma sprayed coatings of self-fluxing powder materials,” J. Phys., Conf. Series, IOP Publishing, 567(1), 012010 (2014).
N. Serres, F. Hlawka, S. Costil, et al., “Microstructures of metallic NiCrBSi coatings manufactured via hybrid plasma spray and in situ laser remelting process,” J. Therm. Spray Technol., 20(1 – 2), 336 – 343 (2011).
M. G. Golkovskii, Hardening and Non-Vacuum Cladding with Relativistic Electron Beam. Technological Possibilities of the Method, LAPLAMBERT Academic Publishing, Saarbrücken (2013), 318 p.
D. V. Lazurenko, I. A. Bataev, I. S. Laptev, et al., “Formation of Ti – Al intermetallics on a surface of titanium by non-vacuum electron beam treatment,” Mater. Charact., 134, 202 – 212 (2017).
M. G. Golkovski, I. A. Bataev, A. A. Bataev, et al., “Atmospheric electron-beam surface alloying of titanium with tantalum,” Mater. Sci. Eng. A, 578, 310 – 317 (2013).
A. A. Ruktuev, V. V. Samoylenko, and M. G. Golkovski, “Structure and corrosion resistance of Ti – Ta – Nb coatings obtained by electron beam cladding in the air-atmosphere,” Appl. Mech. Mater., Trans. Tech. Publ., 682, 100 – 103 (2014).
I. A. Bataev, D. O. Mul, A. A. Bataev, et al., “Structure and tribological properties of steel after non-vacuum electron beam cladding of Ti, Mo and graphite powders,” Mater. Charact., 112, 60 – 67 (2016).
A. A. Losinskaya, A. A. Drobyaz, E. A. Bataev, et al., “Structure and properties of surface layers of low-carbon steel obtained by cladding carbon-containing powder mixtures and subsequent hardening,” Obrab. Met. (Tekhnol., Oborud. , Instr.), No. 4, 5 – 11 (2013).
D. O. Mul, E. A. Drobyaz, I. K. Chakin, et al., “Structure and properties of steel after non-vacuum electron-beam cladding of titanium, tantalum molybdenum and graphite powders,” Obrab. Met. (Tekhnol., Oborud. , Instr.), No. 3, 115 – 120 (2013).
I. M. Poletika, M. G. Golkovskii, M. V. Perovskaya, et al., “Formation of corrosion-resistant coatings by cladding in a beam of relativistic electrons,” Perspekt. Mater., No. 2, 80 – 86 (2006).
S. H. Choo, S. Lee, and M. G. Golkovski, “Effects of accelerated electron beam irradiation on surface hardening and fatigue properties in an AISI 4140 steel used for automotive crankshaft,” Mater. Sci. Eng. A, 293(1 – 2), 56 – 70 (2000).
I. Hemmati, V. Ocelik, and J. T. M. De Hosson, “Dilution effects in laser cladding of Ni – Cr – B – Si – C hardfacing alloys,” Mater. Lett., 84, 69 – 72 (2012).
J. Morimoto, N. Abe, F. Kuriyama, et al., “Formation of a Cr3C2 /Ni – Cr alloy layer by an electron beam cladding method and evaluation of the layer properties,” Vacuum, 62(2 – 3), 203 – 210 (2001).
R. Ki, Z. Li, J. Huang, et al., “Dilution effect on the formation of amorphous phase in the laser cladded Ni – Fe – B – Si – Nb coatings after laser remelting process,” Appl. Surf. Sci., 258(20), 7956 – 7961 (2012).
L. Tushinskii, A. V. Plokhov, A. O. Tokarev, et al., Methods of Materials Research: Structure, Properties and Processes of Deposition of Inorganic Coatings [in Russian] (2004), 384 p.
A. Hasiu and O. Morigaki, Cladding and Spraying [Russian translation], Mashinostroenie, Moscow (1985), 240 p.
L. Kh. Baldaev, V. N. Borisov, V. A. Vakhalin, et al., Thermal Gas Spraying [in Russian], Market DC, Moscow (2007), 344 p.
The work has been performed with financial support of the Russian Federation via the Ministry of Education and Science of the Russian Federation (Agreement No. 14.610.21.0013, Project Identifier RFMEF161017X0013).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 10, pp. 18 – 25, October, 2018.
Rights and permissions
About this article
Cite this article
Zimoglyadova, T.A., Saage, H., Pasichnik, V.A. et al. Structure and Properties of Functional Self-Fluxing Nickel-Containing Coatings Obtained by Non-Vacuum Electron-Beam Cladding. Met Sci Heat Treat 60, 633–640 (2019). https://doi.org/10.1007/s11041-019-00330-4
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11041-019-00330-4