The effect of high-temperature treatment of melt (HTTM) and born and zirconium inoculation on the structure and properties of castings from nickel refractory alloys ZhS3LS-VI and ZMI3U-VI is studied. Chemical and gas analyses of the alloys are performed, the macro- and microstructures are investigated, the thermal conductivity, microhardness, mechanical properties at room temperature and the long-term strength are determined. Variants of processes improving the structure and mechanical properties of castings are suggested.
Similar content being viewed by others
References
R. E. Shalin, B. A. Baum, G. V. Tyagunov, et al., “Time-temperature treatment of melt: fundamentals – possibilities – ways of implementation in the aircraft industry,” Prilozh. k Zh. “Aviats. Promysh-st’,” No. 2, 2 – 3 (1989).
V. V. Klochikhin, P. D. Zhemanyuk, E. I. Tsivirko, et al., “Properties of refractory nickel alloys after HTTM,” Nov. Mater. Tekhnol. Metallurg. Masinostr., No. 1, 41 – 46 (2000).
S. N. Zherebtsov, “Determination of parameters of temperaturetime treatment of refractory nickel alloys,” Tekhnol. Mashinostr., No. 12, 5 – 6 (2005).
V. A. Boguslaev, F. M. Muravchenko, P. D. Zhemanyuk, et al., Technological Provision of Operating Characteristics of Parts of GTE. Turbine Blades, Part II [in Russian], Izd. OAO “Motor Sich,” Zaporozhe (2003), 420 p.
E. N. Kablov, Cast Blades of Gas Turbine Engines (Alloys, Production Processes, Coatings) [in Russia], Izd. Dom. MISiS, Moscow (2001), 632 p.
N. A. Lysenko, V. A. Dusheyko, V. V. Klyuchikhin, and E. I. Tsivirko, “Structure and properties of cast alloy ÉI868 with boron,” Nov. Mater. Tekhnol. Metallurg. Masinostr., No. 2, 35 – 38 (1999).
N. A. Lysenko, V. V. Kudrin, B V. Dolgov, and E. I. Tsivirko, “Zirconium inoculation of castable refractory nickel alloys,” Metalloved. Term. Obrab. Met., No. 3, 13 – 14 (1998).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 4, pp. 7 – 12, April, 2014.
Rights and permissions
About this article
Cite this article
Lysenko, N.A., Pedash, A.A., Kolomoitsev, A.G. et al. Structure and Properties of Boron- and Zirconium-Inoculated Refractory Nickel Alloys Subjected to HTTM. Met Sci Heat Treat 56, 175–180 (2014). https://doi.org/10.1007/s11041-014-9726-9
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11041-014-9726-9