Abstract
The effect of different amine/epoxy ratios on different properties of an epoxy resin was evaluated. Also, different amounts of carbon nanotubes (CNT) were added in order to analyse which of these two factors is more relevant. Dynamic thermomechanical analysis and flexural tests were carried out. The results obtained for the epoxy resin are in agreement with that reported by several researchers. The glass transition temperature of the resin and composites is maximal for the amine/epoxy stoichiometric ratio, while the highest glassy storage and flexural modulus correspond to the epoxy-rich systems, showing that the most crosslinked network is not the stiffest one. The effect of changing the stoichiometry is more relevant than adding CNT to the epoxy resin used in this work. However, the addition of CNT causes more remarkable changes in the epoxy-rich resin, promoting an increase of the glass transition temperature and the elastic modulus.
Similar content being viewed by others
References
Gojny FH, Wichmann MHG, Fiedler B, Schulte K. Influence of different carbon nanotubes on the mechanical properties of epoxy matrix composites—a comparative study. Compos Sci Technol. 2005;65:2300–13.
Chen X, Wang J, Lin M, Zhong W, Feng T, Chen X, Chen J, Xue F. Mechanical and thermal properties of epoxy nanocomposites reinforced with amino-functionalized multi-walled carbon nanotubes. Mater Sci Eng A. 2008;492:236–42.
Song YS, Youn JR. Influence of dispersion states of carbon nanotubes on physical properties of epoxy nanocomposites. Carbon. 2005;43:1378–85.
Xie XL, Mai YW, Zhou XP. Dispersion and alignment of carbon nanotubes in polymer matrix: a review. Mater Sci Eng R. 2005;49:89–112.
Chen W, Auad ML, Williams RJJ, Nutt SR. Improving the dispersion and flexural strength of multiwalled carbon nanotubes-stiff epoxy composites through β-hydroxyester surface functionalization coupled with the anionic homopolymerization of the epoxy matrix. Eur Polym J. 2006;42:2765–72.
Lau KT, Lu M, Lam CK, Cheung HY, Shen FL, Li HL. Thermal and mechanical properties of single-walled carbon nanotube bundle-reinforced epoxy nanocomposites: the role of solvent for nanotube dispersion. Compos Sci Technol. 2005;65:719–25.
Ci L, Bai J. The reinforcement role of carbon nanotubes in epoxy composites with different matrix stiffness. Compos Sci Technol. 2006;66:599–603.
Guzmán de Villoria R, Miravete A, Cuartero J, Chiminelli A, Tolosana N. Mechanical properties of SWNT/epoxy composites using two different curing cycles. Composites B. 2006;37:273–7.
Prolongo SG, Gude MR, Ureña A. Improving the flexural and thermomechanical properties of amino-functionalized carbon nanotube/epoxy composites by using a pre-curing treatment. Compos Sci Technol. 2011;71:765–71.
Prolongo SG, Gude MR, Ureña A. Synthesis and characterisation of epoxy resins reinforced with carbon nanotubes and nanofibers. J Nanosci Nanotechnol. 2009;9:6181–7.
Shen J, Huang L, Wu L, Hu Y, Ye M. The reinforcement role of different amino-functionalized multi-walled carbon nanotubes in epoxy nanocomposites. Compos Sci Technol. 2007;67:3041–50.
Prolongo SG, Gude MR, Ureña A. Rheological behaviour of nanoreinforced epoxy adhesives of low electrical resistivity for joining carbon fiber/epoxy laminates. J Adhes Sci Technol. 2010;24:1097–112.
Calventus Y, Montserrat S, Hutchinson JM. Enthalpy relaxation of non-stoichiometric epoxy-amine resins. Polymer. 2001;42:7081–93.
Meyer F, Sanz G, Eceiza A, Mondragon I, Mijović J. The effect of stoichiometry and thermal history during cure on structure and properties of epoxy networks. Polymer. 1995;36:1407–14.
Fernandez-Nograro F, Valea A, Llano-Ponte R, Mondragon I. Dynamic and mechanical properties of DGEBA/poly(propylene oxide) amine based epoxy resins as a function of stoichiometry. Eur Polym J. 1996;32:257–66.
Vallo CI, Frontini PM, Williams RJJ. The glass transition temperature of nonstoichiometric epoxy-amine networks. J Polym Sci B. 1991;29:1503–11.
Palmese GR, McCullough RL. Effect of epoxy-amine stoichiometry on cured resin material properties. J Appl Polym Sci. 1992;46:1863–73.
Morgan RJ, Kong FM, Walkup CN. Structure-property relations of polyethertriamine-cured bisphenol-A-diglycidyl ether epoxies. Polymer. 1984;25:375–86.
Guerrero P, De la Caba K, Valea A, Corcuera MA, Mondragon I. Influence of cure schedule and stoichiometry on the dynamic mechanical behaviour of tetrafunctional epoxy resins cured with anhydrides. Polymer. 1996;37:2195–200.
Gupta VB, Brahatheeswara C. Molecular packing and free volume in crosslinked epoxy networks. Polymer. 1991;32:1875–84.
Jeffrey K, Pethrick RA. Influence of chemical structure on free volume in epoxy resins: a positron annihilation study. Eur Polym J. 1994;30:153–8.
Prolongo SG, Gude MR, Ureña A. The curing process of epoxy/amino-functionalized MWCNTs: calorimetry, molecular modelling, and electron microscopy. J Nanotechnol 2010; ID 420432.
López J, Rico M, Montero B, Díez J, Ramírez C. Polymer blends based on an epoxy-amine thermoset and a thermoplastic. J Therm Anal Calorim. 2009;95:369–76.
Rico M, López J, Bouza R. Thermal behavior of blends based on a thermoplastic-modified epoxy resin with a crosslinking density variation. J Therm Anal Calorim. 2011;105:599–606.
Bae J, Jang J, Yoon SH. Cure behavior of the liquid-crystalline epoxy/carbon nanotube system and the effect of surface treatment of carbon fillers on cure reaction. Macromol Chem Phys. 2002;203:2196–204.
Acknowledgements
The authors would like to acknowledge the financial support from the Ministerio de Ciencia e Innovación of Spain (Project MAT2010-20724-C02-01) and the Consejería de Educación of Comunidad de Madrid (Programme S2009MAT/1585). María R Gude also thanks Consejería de Educación of Comunidad de Madrid and Fondo Social Europeo for awarding a research contract.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Gude, M.R., Prolongo, S.G. & Ureña, A. Effect of the epoxy/amine stoichiometry on the properties of carbon nanotube/epoxy composites. J Therm Anal Calorim 108, 717–723 (2012). https://doi.org/10.1007/s10973-011-2056-x
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10973-011-2056-x