Abstract
The effects of Mo6+ doping on La0.7Ca0.3CrO3 oxide ceramics synthesized using a solid state reaction method were systematically investigated by thermogravimetric and differential thermal analysis, X-ray diffraction, 3D laser microscopy, UV–Vis spectrophotometry, and infrared diffused reflection measurement. Through these experiments, it was found that the structure, morphology, and spectral properties of the ceramic powders depend on the concentration of Mo6+ ions. Identification and quantification of crystalline phases using Rietveld refinement revealed the presence of Mo-doped calcium lanthanum chromites and calcium molybdate (CaMoO4) in doped oxides with ≤0.5 at% Mo, whereas LaCrO3, CaMoO4 and La2Mo2O9 were formed at higher concentrations. The mean surface roughness of all the samples was around 0.2 μm, and therefore had little influence on the solar absorptance and infrared emissivity. Calculated values obtained by integrating the spectra identified a low near infrared reflectivity (0.47) with 81 % solar absorptance, indicating the possibility of selectively controlling the spectral properties at a specific wavelength to create functional ceramics with variable near infrared reflectivity for use in solar applications.
Similar content being viewed by others
References
E. Ogbonnaya, A. Gunasekaran, L. Weiss, Microsyst. Technol. 19, 995 (2013)
S. Pal, D. Diso, S. Franza, A. Licciulli et al., J. Mater. Sci. 48, 8268 (2013)
E. Sani, L. Mercatelli, P. Sansoni et al., J. Renew. Sustain. Ener. 4, 033104 (2012)
B. Mahadik, S. Gujjar, G.M. Gouda et al., Appl. Surf. Sci. 299, 6 (2014)
M.F. Modest, Radiative Heat Transfer (Academic Press, San Diego, 2003)
K. Sun, W. Zhou, X. Tang et al., Appl. Surf. Sci. 257, 9639 (2011)
X. Liu, W. Su, Z. Lu, J. Phys. Chem. Solids 62, 1919 (2001)
M.S.S. Khine, L. Chen, S. Zhang et al., Int. J. Hydrogen Energ. 38, 13300 (2013)
H. Rashtchi, M.A.F. Sani, A.M. Dayaghi, Ceram. Int. 39, 8123 (2013)
Z. Han, J. Liu, X.W. Li et al., J. Am. Ceram. Soc. 97, 2705 (2014)
B.G. Tilset, H. Fjellvag, A. Kjekshus, J. Solid State Chem. 119, 271 (1995)
Y.P. Fu, H.C. Wang, S.H. Hu, K.W. Tay, Ceram. Int. 37, 2127 (2011)
P.A. Desai, P.N. Joshi, K.R. Patil, A.A. Athawale, Appl. Surf. Sci. 264, 574 (2013)
L. Chen, C.H. Lu, Z.G. Fang et al., J. Phys. D. Appl. Phys. 46, 105302 (2013)
S.P. Jiang, L. Liu, K.P. Ong et al., J. Power Sources 176, 82 (2008)
S. Mukherjee, M.R. Gonal, M.K. Patel et al., J. Am. Ceram. Soc. 95, 290 (2012)
B.H. Toby, EXPGUI, a graphical user interface for GSAS. J. Appl. Crystallogr. 34, 210 (2001)
F. Yi, S. Xiaogang, F. Righini, Int. J. Thermophys. 24, 849 (2003)
Y. Mastai, S. Polarz, M. Antonietti, Adv. Funct. Mater. 12, 197 (2002)
X.D. Xiao, L. Miao, G. Xu et al., Appl. Surf. Sci. 257, 10729 (2011)
D. Riya, K. Astha, K.S. Abhishek, Sens. Actuators B 210, 581 (2015)
R.D. Shannon, Acta. Cryst. A32, 751 (1976)
A.A. Athawale, P.A. Desai, Ceram. Int. 311, 3037 (2011)
A. Akbari, M. Omidkhah, J.T. Darian, Ultrason. Sonochem. 23, 231 (2015)
M.A. Sherief, J. Non-Cryst, Solids 358, 406 (2012)
B. Deb, A. Ghosh, J. Appl. Phys. 112, 024102 (2012)
B. Deb, A. Ghosh, J. Alloys. Compd. 509, 8251 (2011)
K. Sun, W.H. Lee, W.M. Risen, J. Non-Cryst, Solids 92, 145 (1987)
N. Pailhé, A. Wattiaux, M. Gaudon et al., J. Solid State Chem. 181, 1040 (2008)
Acknowledgments
This work was supported by the JiangSu collaborative innovation center for advanced inorganic function composites, the funding from the Priority Academic Program Development of the Jiangsu Higher Education Institutions (PAPD), the independent research topic of State Key Laboratory of Materials-Oriented Chemical Engineering (ZK201211), as well as the Key Laboratory of Inorganic Coating Materials, Chinese Academy of Sciences (KLICM-2014-10).
Author information
Authors and Affiliations
Corresponding authors
Rights and permissions
About this article
Cite this article
Lu, Y., Zhang, R., Wei, L. et al. Novel spectral properties for La0.7Ca0.3CrO3 ceramics by Mo6+ doping. J Mater Sci: Mater Electron 27, 2412–2418 (2016). https://doi.org/10.1007/s10854-015-4039-3
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10854-015-4039-3