Skip to main content
Log in

Wetting and tribological properties of superhydrophobic aluminum surfaces with different water adhesion

  • Metals & corrosion
  • Published:
Journal of Materials Science Aims and scope Submit manuscript

Abstract

In this article, a facile and efficient nanosecond laser processing method was carried out to construct a grid of microgrooves on an aluminum surface. After modification with low surface energy materials, various superhydrophobic surfaces with different water adhesion are obtained. The wetting properties of the obtained samples could be regulated by adjusting the number and line spacing (LS) of laser processing steps. The contact angle of the obtained superhydrophobic samples increased with the decrease in LS, while the sliding angle showed the opposite trend. Increasing the number of laser processing steps is beneficial to increase the contact angle and reduce the sliding angle. The wetting mechanism was analyzed to explain the cause of change in the wetting behaviors. The tribological tests showed that the surface textures of superhydrophobic samples improved their tribological properties. What is more, whether it is under dry friction or water lubrication conditions, the obtained superhydrophobic samples with large LS have good anti-friction and wear-resistant ability. The advantages of the facile preparation and excellent tribological properties will definitely expand the use of laser-machined superhydrophobic surfaces.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Figure 1
Figure 2
Figure 3
Figure 4
Figure 5
Figure 6
Figure 7
Figure 8
Figure 9
Figure 10

Similar content being viewed by others

References

  1. Liu K, Jiang L (2011) Multifunctional integration: from biological to bio-inspired materials. ACS Nano 5(9):6786–6790

    Article  CAS  Google Scholar 

  2. Koch K, Bhushan B, Jung YC, Barthlott W (2009) Fabrication of artificial Lotus leaves and significance of hierarchical structure for superhydrophobicity and low adhesion. Soft Matter 5(7):1386–1393

    Article  CAS  Google Scholar 

  3. Bhushan B, Her EK (2010) Fabrication of superhydrophobic surfaces with high and low adhesion inspired from rose petal. Langmuir 26(11):8207–8217

    Article  CAS  Google Scholar 

  4. Luo H, Yin S, Zhang G, Tang Q, Gen J, Huang S (2018) Study of superhydrophobic surface in self-cleaning of magnetorheological fluid. J Mater Sci 53:1769–1780. https://doi.org/10.1007/s10853-017-1613-5

    Article  CAS  Google Scholar 

  5. Xu S, Wang Q, Wang N, Zheng X (2019) Fabrication of superhydrophobic green surfaces with good self-cleaning, chemical stability and anti-corrosion properties. J Mater Sci 54:13006–13016. https://doi.org/10.1007/s10853-019-03789-x

    Article  CAS  Google Scholar 

  6. Cheng Y, Lu S, Xu W, Cao K, Li J, Zheng Y (2018) Controllable fabrication of superhydrophobic alloys surface on copper substrate for self-cleaning, anti-icing, anti-corrosion and anti-wear performance. Surf Coat Technol 333:61–70

    Article  CAS  Google Scholar 

  7. Zhu H, Hu W, Zhao S, Zhang X, Pei L, Zhao G, Wang Z (2020) Flexible and thermally stable superhydrophobic surface with excellent anti-corrosion behavior. J Mater Sci 55:2215–2225. https://doi.org/10.1007/s10853-019-04050-1

    Article  CAS  Google Scholar 

  8. Wang N, Tang L, Cai Y, Tong W, Xiong D (2018) Scalable superhydrophobic coating with controllable wettability and investigations of its drag reduction. Colloid Surf A 555:290–295

    Article  CAS  Google Scholar 

  9. Pan L, Wang F, Pang X, Zhang L, Hao J (2019) Superhydrophobicity and anti-icing of CF/PEEK composite surface with hierarchy structure. J Mater Sci 54:14728–14741. https://doi.org/10.1007/s10853-019-03956-0

    Article  CAS  Google Scholar 

  10. Wang Q, Cui J, Liu S, Gao J, Lang J, Li C, Yan Y (2019) Facile preparation of halloysite nanotube-modified polyvinylidene fluoride composite membranes for highly efficient oil/water emulsion separation. J Mater Sci 54:8332–8345. https://doi.org/10.1007/s10853-019-03482-z

    Article  CAS  Google Scholar 

  11. He J, Zhang Y, Wang J, Ma L, Zhao Y, Zhou Y, Yang Z, Qu M (2020) Eco-friendly, magnetic-driven, superhydrophobic sponge for oil/water separation and emulsion purification. J Mater Sci. https://doi.org/10.1007/s10853-020-04462-4

    Article  Google Scholar 

  12. He J, Wu M, Zhang R, Liu J, Deng Y, Guo Z (2018) A one-step hot-embossing process for fabricating a channel with superhydrophobic inner walls. J Manuf Process 36:351–359

    Article  Google Scholar 

  13. Feng L, Zhu Y, Wang J, Shi X (2017) One-step hydrothermal process to fabricate superhydrophobic surface on magnesium alloy with enhanced corrosion resistance and self-cleaning performance. Appl Surf Sci 422:566–573

    Article  CAS  Google Scholar 

  14. Liu Y, Xue J, Luo D, Wang H, Gong X, Han Z, Ren L (2017) One-step fabrication of biomimetic superhydrophobic surface by electrodeposition on magnesium alloy and its corrosion inhibition. J Colloid Interface Sci 491:313–320

    Article  CAS  Google Scholar 

  15. Guo D, Chen J, Wen L, Wang P, Xu S, Cheng J, Wen X, Wang S, Huang C, Pi P (2018) A superhydrophobic polyacrylate film with good durability fabricated via spray coating. J Mater Sci 53:15390–15400. https://doi.org/10.1007/s10853-009-3962-1

    Article  CAS  Google Scholar 

  16. Guo Y, Wang Q, Wang T (2011) A facile process for preparing superhydrophobic films with surface-modified SiO2/nylon 6,6 nanocomposite. J Mater Sci 46(11):4079–4084. https://doi.org/10.1007/s10853-011-5337-7

    Article  CAS  Google Scholar 

  17. He A, Liu W, Xue W, Yang H, Cao Y (2018) Nanosecond laser ablated copper superhydrophobic surface with tunable ultrahigh adhesion and its renewability with low temperature annealing. Appl Surf Sci 434:120–125

    Article  CAS  Google Scholar 

  18. Cai Y, Chang W, Luo X, Sousa AML, Lau KHA, Qin Y (2018) Superhydrophobic structures on 316L stainless steel surfaces machined by nanosecond pulsed laser. Precis Eng 52:266–275

    Article  Google Scholar 

  19. Lu J, Huang T, Liu Z, Zhang X, Xiao R (2018) Long-term wettability of titanium surfaces by combined femtosecond laser micro/nano structuring and chemical treatments. Appl Surf Sci 459:257–262

    Article  CAS  Google Scholar 

  20. Li J, Zhao S, Du F, Zhou Y, Yu H (2018) One-step fabrication of superhydrophobic surfaces with different adhesion via laser processing. J Alloy Compd 739:489–498

    Article  CAS  Google Scholar 

  21. Song Y, Wang C, Dong X, Yin K, Zhang F, Xie Z, Chu D, Duan J (2018) Controllable superhydrophobic aluminum surfaces with tunable adhesion fabricated by femtosecond laser. Opt Laser Technol 102:25–31

    Article  CAS  Google Scholar 

  22. Feng G, Li F, Xue W, Sun K, Yang H, Pan Q, Cao Y (2019) Laser textured GFRP superhydrophobic surface as an underwater acoustic absorption metasurface. Appl Surf Sci 463:741–746

    Article  CAS  Google Scholar 

  23. Cassie ABD, Baxter S (1944) Wettability of porous surfaces. Trans Faraday Soc 40:0546–0550

    Article  CAS  Google Scholar 

  24. Lai Y, Gao X, Zhuang H, Huang J, Lin C, Jiang L (2009) Designing superhydrophobic porous nanostructures with tunable water adhesion. Adv Mater 21(3):3799–3803

    Article  CAS  Google Scholar 

  25. Wenzel RN (1936) Resistance of solid surfaces to wetting by water. Ind Eng Chem 28(8):988–994

    Article  CAS  Google Scholar 

  26. Zhang H, Yang J, Chen B, Liu C, Zhang M, Li C (2015) Fabrication of superhydrophobic textured steel surface for anti-corrosion and tribological properties. Appl Surf Sci 359:905–910

    Article  CAS  Google Scholar 

  27. Li Y, Wan Y, Dong Z, Zhang J (2014) Excellent friction-reducing performance of superhydrophobic steel surface in dry sliding. RSC Adv 4(39):20548–20553

    Article  CAS  Google Scholar 

Download references

Funding

The work was supported by National Natural Science Foundation of China (Grant Nos. 51775169, U1404516, U1604253), Natural Science Foundation of Henan province (Grant No. 162300410053), Training Program of Young Key Teachers in Henan University of Technology, Training Program of Young Key Teachers in Colleges and Universities in Henan Province (Grant No. 2016GGJS-067), Key Scientific Research Projects of Henan Colleges and Universities (Grant No. 17A430014).

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Yonggang Guo.

Ethics declarations

Conflict of interest

The authors declare that they have no conflict of interest.

Additional information

Publisher's Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Guo, Y., Zhang, X., Wang, X. et al. Wetting and tribological properties of superhydrophobic aluminum surfaces with different water adhesion. J Mater Sci 55, 11658–11668 (2020). https://doi.org/10.1007/s10853-020-04733-0

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s10853-020-04733-0

Navigation