Abstract
Experimental observations concerning the time dependent variation in the room temperature microhardness of porous compacts of nanocrystalline Palladium are presented. These data and the earlier findings on the elevated temperature response of compacts of nanocrystalline composites Fe-63 vol% TiN and Ni-58 vol% TiN are interpreted as due to power law creep. The equations developed are validated using the experimental results.
Similar content being viewed by others
References
H. HAHN and K. A. PADMANABHAN, Nanostr. Mater. 6 (1995) 191.
Idem., in “Advanced Materials and Processing,” edited by K. S. Shin, J. K. Yoon and S. J. Kim, (Korean Inst. of Metals and Mater., Kyongju, Korea, 1995) Vol. 3, p. 2119.
K. A. PADMANABHAN and H. HAHN, in “Synthesis and Processing of Nanocrystalline Powder,” edited by G. Burrell, (Minerals, Metals and Mater. Soc., Warrendale, PA, USA, 1996) p. 21.
D. G. MORRIS, “Mechanical Behavior of Nanostructured Materials,” (Mater. Sci. Foundations 2, Trans. Tech. Publ., Aedermannsdorf, Switzerland, 1998) p. 1.
K. A. PADMANABHAN, Mater. Sci. Eng. A304–306 (2001) 200.
K. S. KUMAR, H. VAN SWYGENHOVEN and S. SURESH, Acta Mater. 51 (2003) 5743.
A. J. KOZLOV, D. H. KIM, A. YEZERETS, P. ANDERSEN, H. H. KUNG and M. C. KUNG, J. Catal. 209 (2002) 417.
T. J. WEBSTER, R. W. SIEGEL and R. BIZIOS, Nanostr. Mater. 12 (1999) 983.
G. D. MCADAM, J. Iron Steel Inst. 68 (1951) 346.
G. ARTUSIA, V. GALLINA, G. MANNONE and E. SGAMBETTERA, Powder Met. 9 (1966) 89.
R. HAYNES and J. T. EGEDIEGE, ibid. 32 (1989) 47.
Y. OGINO, T. YAMASAKI and B. L. SHEN, in “Advanced Materials and Processing,” edited by K. S. SHIN, J. K. YOON and S. J. KIM (Korean Inst. of Metals and Mater., Kyongju, Korea, 1995) Vol. 3, p. 2149.
W. M. YIN, S. H. WHONG, R. MIRSHAMS and C. H. XIAO, Mater. Sci. Eng. A301 (2001) 18.
H. IWASAKI, K. HIGASHI and T. G. NIEH, Scr. Mater. 50 (2004) 395.
A. HASNAOUI, H. VAN SWYGENHOVEN and P. M. DERLET, Acta Mater. 50 (2002) 3927.
R. BIRRINGER, H. GLEITER, H.-P. KLEIN and P. MARQUARDT, Phys. Lett. 102A (1984) 461.
H. P. KLUG and L. E. ALEXANDER, “X-Ray Diffraction Procedures for Polycrystalline and Amorphous Materials” (John Wiley, New York, 1954).
J. WEISSMUELLER, J. LÖFFLER and M. KLEBER, Nanostr. Mater. 6 (1995) 105.
W. B. LI, J. L. HENSHALL, R. M. HOOPER and K. E. EASTERLING, Acta Metall. Mater. 39 (1991) 3099.
K. A. PADMANABHAN, R. A. VASIN and F. U. ENIKEEV, “Superplastic Flow: Phenomenology and Mechanics” (Springer Verlag, Heidelberg-Berlin, 2001).
S. VEPREK, Thin Solid Films 297 (1997) 145.
G. W. NIEMAN, J. R. WEERTMAN and R. W. SIEGEL, Scr. Metall. Mater. 24 (1990) 145.
Idem., J. Mater. Res. 6 (1991) 1012.
J. H. GITTUS, “Creep, Viscoelasticity and Creep Fracture in Solids” (Applied Science, London, 1975) pp. 168–171, 182–185, 192–193, 196–197, 278–279, 342–343, 396–399, 500–501, 526–527, 538–539, 542–547, 638–639.
H. A. KUHN, in “Powder Metallurgy Processing,” edited by H. A. KUHN and A. LAWLEY, (Academic Press, New York, 1978) p. 99.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Padmanabhan, K.A., Mondal, P. & Hahn, H. Micro-indentation creep of porous nanocrystalline metallic and composite compacts. J Mater Sci 40, 6113–6120 (2005). https://doi.org/10.1007/s10853-005-3171-5
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10853-005-3171-5