Skip to main content
Log in

A Study of the Parasitic Properties of the Schottky Barrier Diode

  • Published:
Journal of Infrared, Millimeter, and Terahertz Waves Aims and scope Submit manuscript

Abstract

In this paper, we present a newly designed parameter extraction method of the Schottky barrier diode (SBD) with the purpose of measuring and studying its parasitic properties. This method includes three kinds of auxiliary configurations and is named as three-configuration parameter extraction method (TPEM). TPEM has such features as simplicity of operation, self-consistence, and accuracy. With TPEM, the accurate parasitic parameters of the diode can be easily obtained. Taking a GaAs SBD as an example, the pad-to-pad capacitance is 7 fF, the air-bridge finger self-inductance 11 pH, the air-bridge finger self-resistance 0.6 Ω, and the finger-to-pad capacitance 2.1 fF. A more accurate approach to finding the value of the series resistant of the SBD is also proposed, and then a complete SBD model is built. The evaluation of the modeling technology, as well as TPEM, is implemented by comparing the simulated and measured I-V curves and the S-parameters. And good agreements are observed. By using TPEM, the influence of the variation of the geometric parameters is studied, and several ways to reduce the parasitic effect are presented. The results show that the width of the air-bridge finger and the length of the channel are the two largest influencing parameters, with the normalized impact factors 0.56 and 0.29, respectively. By using TPEM and the modeling technology presented in this paper, a design process of the SBD is proposed. As an example, a type of SBD suitable for 500–600 GHz zero-biased detection is designed, and the agreement between the simulated and measured results has been improved. SBDs for other applications could be designed in a similar way.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12

Similar content being viewed by others

References

  1. A. Maestrini, I. Mehdi, R. Lin, J. V. Siles, C. Lee, J. Gill, G. Chattopadhyay, E. Schlecht, T. Bertrand, and J. Ward, “A 2.5-2.7 THz Room Temperature Electronic Source,” in 22nd International Symposium on Space Terahertz Technology Tucson, Arizona, Apr. 2011.

  2. T. Crowe, J. Hesler, C. Pouzou, W. Bishop, and G. Schoenthal, “Development and characterization of a 2.7 THz LO source,” in Proc. 22nd Int. Symp. on Space Terahertz Technol, 2011, pp. 26-28.

  3. B. Thomas, A. Maestrini, and G. Beaudin, “A low-noise fixed-tuned 300-360-GHz sub-harmonic mixer using planar Schottky diodes,” Microwave and Wireless Components Letters, IEEE, vol. 15, no. 12, pp. 865-867, 2005.

    Article  Google Scholar 

  4. J. L. Hesler, and T. W. Crowe, “Responsivity and noise measurements of zero-bias Schottky diode detectors,” Proc. ISSTT, pp. 89-92, 2007.

  5. A. E. Grekov, Z. Chen, R. Fu, J. L. Hudgins, H. A. Mantooth, D. C. Sheridan, J. Casady, and E. Santi, “Parameter extraction procedure for vertical SiC power JFET,” Industry Applications, IEEE Transactions on, vol. 47, no. 4, pp. 1862-1871, 2011.

    Article  Google Scholar 

  6. C. F. Campbell, and S. A. Brown, “An analytic method to determine GaAs FET parasitic inductances and drain resistance under active bias conditions,” Microwave Theory and Techniques, IEEE Transactions on, vol. 49, no. 7, pp. 1241-1247, 2001.

    Article  Google Scholar 

  7. A. Y. Tang, V. Drakinskiy, K. Yhland, J. Stenarson, T. Bryllert, and J. Stake, “Analytical extraction of a Schottky diode model from broadband S-parameters,” Microwave Theory and Techniques, IEEE Transactions on, vol. 61, no. 5, pp. 1870-1878, 2013.

    Article  Google Scholar 

  8. T. Ren, Y. Zhang, R. Xu, J. Zhou, C. Yang, and Z. Jin, “A 340-400 GHz Zero-Biased Waveguide Detector Using an Self-Consistent Method to Extract the Parameters of Schottky Barrier Diode,” Applied Computational Electromagnetics Society Journal, vol. 30, no. 12, 2015.

  9. S. Taking, “AlN/GaN MOS-HEMTs Technology,” University of Glasgow, 2012.

  10. T. J. Reck, L. Chen, C. Zhang, A. Arsenovic, C. Groppi, A. Lichtenberger, R. M. Weikle, and N. S. Barker, “Micromachined probes for submillimeter-wave on-wafer measurements—Part II: RF design and characterization,” Terahertz Science and Technology, IEEE Transactions on, vol. 1, no. 2, pp. 357-363, 2011.

    Article  Google Scholar 

  11. N. Alijabbari, M. F. Bauwens, and R. M. Weikle, “Design and Characterization of Integrated Submillimeter-Wave Quasi-Vertical Schottky Diodes,” Terahertz Science and Technology, IEEE Transactions on, vol. 5, no. 1, pp. 73-80, 2015.

    Article  Google Scholar 

  12. G. Massabrio, and P. Antognetti, Semiconductor device modeling with SPICE: McGraw-Hill, Inc., 1998.

  13. G. Chattopadhyay, “Technology, capabilities, and performance of low power terahertz sources,” Terahertz Science and Technology, IEEE Transactions on, vol. 1, no. 1, pp. 33-53, 2011.

    Article  Google Scholar 

  14. J. T. Louhi, and A. V. Räisänen, “On the modeling and optimization of Schottky varactor frequency multipliers at submillimeter wavelengths,” Microwave Theory and Techniques, IEEE Transactions on, vol. 43, no. 4, pp. 922-926, 1995.

    Article  Google Scholar 

  15. Z. Yong, L. Qiu-Quan, L. Wei, L. Li, and X. Rui-Min, “Design of a 220 GHz frequency tripler based on EM model of Schottky diodes,” JOURNAL OF INFRARED AND MILLIMETER WAVES, vol. 33, no. 4, pp. 405-411, 2014.

    Google Scholar 

  16. R. Tian-Hao, Z. Yong, Y. Bo, X. Rui-Min, Y. Cheng-Yue, Z. Jing-Tao, and J. Zhi, “A 330–500 GHz Zero-Biased Broadband Tripler Based on Terahertz Monolithic Integrated Circuits,” Chinese Physics Letters, vol. 32, no. 2, pp. 020702, 2015.

  17. A. Maestrini, J. S. Ward, J. J. Gill, H. S. Javadi, E. Schlecht, C. Tripon-Canseliet, G. Chattopadhyay, and I. Mehdi, “A 540-640-GHz high-efficiency four-anode frequency tripler,” Microwave Theory and Techniques, IEEE Transactions on, vol. 53, no. 9, pp. 2835-2843, 2005.

    Article  Google Scholar 

  18. A. Maestrini, J. Ward, J. Gill, G. Chattopadhyay, F. Maiwald, K. Ellis, H. Javadi, and I. Mehdi, “A planar-diode frequency tripler at 1.9 THz.” pp. 747-750.

  19. K. S. Saini, “Development of frequency multiplier technology for ALMA,” 2003.

  20. A. Semenov, O. Cojocari, H.-W. Hübers, F. Song, A. Klushin, and A.-S. Müller, “Application of zero-bias quasi-optical Schottky-diode detectors for monitoring short-pulse and weak terahertz radiation,” Electron Device Letters, IEEE, vol. 31, no. 7, pp. 674-676, 2010.

    Article  Google Scholar 

Download references

Acknowledgments

The authors would like to thank the support from the National High Technology Research and Development Program of China (863 Program) (2011AA010203), the National Basic Research Program of China (973 Program) (2011CB201704, 2010CB327502), and the National Nature Science Foundation of China (61434006).

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Tianhao Ren.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Ren, T., Zhang, Y., Liu, S. et al. A Study of the Parasitic Properties of the Schottky Barrier Diode. J Infrared Milli Terahz Waves 38, 143–154 (2017). https://doi.org/10.1007/s10762-016-0315-4

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s10762-016-0315-4

Keywords

Navigation