It is shown that fully sintered ceramic articles can be obtained on the basis of local feldspar-zeolite raw material. Materials with high strength and low water absorption were obtained by optimizing the batch composition.
Similar content being viewed by others
Notes
Here and below the content by weight, %.
References
V. F. Pavlov, Physical and Chemical Principles of Firing of Articles of Building Ceramic [in Russian], Stroiizdat, Moscow (1977).
G. I. Ovcharenko, V. L. Sviridov, and L. K. Kazantsev, Zeolites in Building Materials [in Russian], Izd. AltGTU, Barnaul (2000).
N. A. Toropov and V. P. Borzakovskii, Phase Diagram of Silicate Systems [in Russian], Nauka, Leningrad (1972).
G. D. Ashmarin, N. I. Naumkina, and A. M. Gubaidullina, “Ceramic wall materials based on zeolite-containing clay material,” Stroit. Mater., No. 2, 52 – 53 (2005).
V. I. Goleus and A. Ya. Belyi, “Calculation of the viscosity of enamel melts,” Steklo Keram., No. 8, 30 – 31 (1997).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Steklo i Keramika, No. 9, pp. 28 – 31, September, 2015.
Rights and permissions
About this article
Cite this article
Kara-Sal, B.K., Seren, S.V. & Mongush, D.S. Production of Densely Sintered Ceramic Articles Using Feldspar-Zeolite Raw Material From Tuva. Glass Ceram 72, 331–334 (2016). https://doi.org/10.1007/s10717-016-9785-z
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10717-016-9785-z