Application of disk springs as vibration isolators with quasi-zero stiffness is described. Analytical studies are made to determine the design parameters of the described vibration isolators. The model of a disk spring as a combination of a separate disk spring and an annular section is proposed.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
B. V. Ovsyannikov, Theory and Calculation of Pumps of Fluid Rocket Engines, GNTI OboronGIZ, Moscow (1960).
A. V. Rudachenko and I. V. Shtin, “Experience of introduction of vibration diagnostics systems in technical servicing and repair of NPS equipment based on technical state,” Trubopr. Transp. Nefti, No. 4, 25–29 (1998).
L. E. Andreeva, Elastic Elements of Devices, Mashinostroenie, Moscow (1981), 2nd ed.
V. I. Feodos’ev, “Calculation of Bellville spring,” New Methods of Calculating the Springs, Mashgiz, Moscow (1946), pp. 83–102.
P. M. Alabuzhev, A. A. Gritchin, and L. I. Kim, Vibration-Protection System with Quasi-Zero Stiffness, K. M. Ragulskis (ed.), Mashinostroenie, Leningrad (1986), p. 96.
Ya. G. Panovko, Fundamentals of Applied Theory of Vibrations and Shock, Politekhnika, Leningrad (1990), p. 272.
V. I. Anur’ev, A Handbook for Designers and Machine Builders, I. N. Zhestkova (ed.), Mashinostroenie, Moscow (2001), 8th ed., Vol. 3, p. 864.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Khimicheskoe i Neftegazovoe Mashinostroenie, No. 3, pp. 33–37, March, 2015.
Rights and permissions
About this article
Cite this article
Valeev, A.R., Zotov, A.N. & Kharisov, S.A. Application of Disk Springs for Manufacturing Vibration Isolators with Quasi-Zero Stiffness. Chem Petrol Eng 51, 194–200 (2015). https://doi.org/10.1007/s10556-015-0023-2
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10556-015-0023-2