Abstract
This article reports a design that reliably adds reagents into droplets by exploiting the physics of fluid flow at a T-junction in the microchannel. An expanded section right after the T-junction enhances merging of a stream with a droplet, eliminates the drawbacks such as extra droplet formation and long mixing time. The expanded section reduces the pressure buildup at the T-junction and minimizes the tendency to form extra droplets; plays the role in creating low Laplace pressure jump across the interface of the droplet forming from the T-junction which reduces the probability of forming extra droplet in the merging process; provides space for droplet coalescence if there is an extra droplet due to droplet break-up before merging. In this design, after merging, the reactants are in axial arrangement inside the droplets which lead to faster mixing. Reliable addition of reagent to the droplets happens for the combination of flow rates in a broad range from 25 to 250 μl/h, for both DI water (Q DI) and fluorescent (Q fluo) streams.
This is a preview of subscription content, log in via an institution to check access.
References
Ahn K, Agresti J, Chong H, Marquez M, Weitz DA (2006) Electrocoalescence of drops synchronized by size-dependent flow in microfluidic channels. Appl Phys Lett 88:264105
Bremond N, Thiam AR, Bibette J (2008) Decompressing emulsion droplets favors coalescence. Phys Rev Lett 100:024501
Bringer MR, Gerdts CJ, Song H, Tice JD, Ismagilov RF (2004) Microfluidic systems for chemical kinetics that rely on chaotic mixing in droplets. Philos Trans Roy Soc A 362:1087–1104
Christopher GF, Anna SL (2007) Microfluidic methods for generating continuous droplet streams. J Phys D 40:R319–R336
Fidalgo LM, Abell C, Huck WTS (2007) Surface-induced droplet fusion in microfluidic devices. Lab Chip 7:984–986
Frenz L, Harrak AE, Pauly M, Bégin-Colin S, Griffiths AD, Baret JC (2008) Droplet-based microreactors for the synthesis of magnetic iron oxide nanoparticles. Angew Chem Int Ed 47:6817–6820
Garstecki P, Fuerstman MJ, Stone HA, Whitesides GM (2006) Formation of droplets and bubbles in a microfluidic T-junction—scaling and mechanism of break-up. Lab Chip 6:437–446
Hatakeyama T, Chen DL, Ismagilov RF (2006) Microgram-scale testing of reaction conditions in solution using nanoliter plugs in microfluidics with detection by MALDI-MS. J Am Chem Soc 128:2518–2519
Henkel T, Bermig T, Kielpinski M, Grodrian A, Metze J, Köhler J (2004) Chip modules for generation and manipulation of fluid segments for micro serial flow processes. Chem Eng J 101:439–445
Köhler JM, Henkel T, Grodrian A, Kirner T, Roth M, Martin K, Metze J (2004) Digital reaction technology by micro segmented flow-components, concepts and applications. Chem Eng J 101:201–216
Li L, Boedicker JQ, Ismagilov RF (2007) Using a multijunction microfluidic device to inject substrate into an array of preformed plugs without cross-contamination: comparing theory and experiments. Anal Chem 79:2756–2761
Liu K, Ding H, Chen Y, Zhao XZ (2007) Droplet-based synthetic method using microflow focusing and droplet fusion. Microfluidics Nanofluidics 3:239–243
Nguyen N-T, Wu Z (2005) Micromixers—a review. J Micromech Microeng 15:R1–R16
Nisisako T, Torii T, Higuchi T (2002) Droplet formation in a microchannel network. Lab Chip 2:24–26
Niu X, Gulati S, Edel JB, deMello AJ (2008) Pillar-induced droplet merging in microfluidic circuits. Lab Chip 8:1837–1841
Sarrazin F, Prat L, Di Miceli N, Cristobal G, Link DR, Weitz DA (2007) Mixing characterization inside microdroplets engineered on a microcoalescer. Chem Eng Sci 62:1042–1048
Shestopalov I, Tice JD, Ismagilov RF (2004) Multi-step synthesis of nanoparticles performed on millisecond time scale in a microfluidic droplet-based system. Lab Chip Miniatur Chem Biol 4:316–321
Song H, Tice JD, Ismagilov RF (2003) A microfluidic system for controlling reaction networks in time. Angew Chem 42:768–772
Song H, Chen D, Ismagilov RF (2006) Reactions in droplets in microfluidic channels. Angew Chem 45:7336–7356
Stone HA, Stroock AD, Ajdari A (2004) Engineering flows in small devices: microfluidics toward a lab-on-a-chip. Annu Rev Fluid Mech 36:381–411
Taly V, Kelly BT, Griffiths AD (2007) Droplets as microreactors for high-throughput biology. ChemBioChem 8:263–272
Tan Y, Fisher JS, Lee AI, Cristini V, Lee AP (2004) Design of microfluidic channel geometries for the control of droplet volume, chemical concentration, and sorting. Lab Chip 4:292–298
Tan Y, Ho YL, Lee AP (2007) Droplet coalescence by geometrically mediated flow in microfluidic channels. Microfluidics Nanofluidics 3:495–499
Tanthapanichakoon W, Aoki N, Matsuyama K, Mae K (2006) Design of mixing in microfluidic liquid slugs based on a new dimensionless number for precise reaction and mixing operations. Chem Eng Sci 61:4220–4232
Teh S-Y, Lin R, Hung L-H, Lee AP (2008) Droplet microfluidics. Lab Chip 8:198–220
Um E, Lee DS, Pyo HB, Park JK (2008) Continuous generation of hydrogel beads and encapsulation of biological materials using a microfluidic droplet-merging channel. Microfluidics Nanofluidics 5:541–549
Whitesides GM, Ostuni E, Takayama S, Jiang X, Ingber DE (2001) Soft lithography in biology and biochemistry. Annu Rev Biomed Eng 3:335–373
Acknowledgments
The authors gratefully acknowledge the support from the Agency of Science, Technology and Research (A*STAR), Singapore (Grant Number SERC 0521010108 “Droplet-based micro/nanofluidics”).
Author information
Authors and Affiliations
Corresponding author
Electronic supplementary material
Below is the link to the electronic supplementary material.
MPEG (1770 KB)
Rights and permissions
About this article
Cite this article
Sivasamy, J., Chim, Y.C., Wong, TN. et al. Reliable addition of reagents into microfluidic droplets. Microfluid Nanofluid 8, 409–416 (2010). https://doi.org/10.1007/s10404-009-0531-5
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10404-009-0531-5