Abstract
A measurement system based on the Scheimpflug principle is designed in this paper to solve the problem of difficulty in clear imaging due to excessively small depth of field in line-structured light close-range photogrammetry. A conversion model from the image coordinate system to the measured object coordinate system is established through the spatial projection relationship. The calibration method of the measurement system under Scheimpflug conditions is investigated and the calibration of the measurement system is completed through nonlinear iterative optimization, and the calibration re-projection error is less than 0.3 pixels. GPU (graphic processing unit) acceleration processing is performed on the center extraction of line-structured light stripe to achieve real-time output at a high frame rate. The processing time for a single 1024 × 1280 image is only 2.14 ms after acceleration. Experimental results showed that the measurement system can realize the three-dimensional measurement of complex shapes and high-reflectivity surfaces with high detection accuracy and output frame rate.
Similar content being viewed by others
References
Mei, Q., Gao, J., Lin, H., et al.: Structure light telecentric stereoscopic vision 3D measurement system based on Scheimpflug condition. Opt. Lasers Eng. 86, 83–91 (2016)
Berliner, P.: The Scheimpflug principless. Projection Lights Staging News (2010)
Peng, J., Wang, M., Deng, D., et al.: Distortion correction for microscopic fringe projection system with Scheimpflug telecentric lens. Appl. Opt. (2004) 54(34), 10055–10062 (2015)
Heikkila, J., Silven, O.: A four-step camera calibration procedure with implicit image correction. F. IEEE (1997)
Weng, J., Cohen, P., Herniou, M.: Camera calibration with distortion models and accuracy evaluation. IEEE Trans. Pattern Anal. Mach. Intell. 14(10), 965–980 (1992)
An, Y., Bell, T., Li, B., et al.: Method for large-range structured light system calibration. Appl. Opt. (2004) 55(33), 9563–9572 (2016)
Zhang, Z.: A flexible new technique for camera calibration. IEEE Trans. Pattern Anal. Mach. Intell. 22(11), 1330–1334 (2000)
Ma, S.D.: A self-calibration technique for active vision systems. IEEE Trans. Robot. Autom. 12(1), 114–120 (1996)
Legarda, A., Izaguirre, A., Arana, N., et al.: A new method for Scheimpflug camera calibration. F. IEEE. (2011)
Cornic, P., Illoul, C., Cheminet, A., et al.: Another look at volume self-calibration: calibration and self-calibration within a pinhole model of Scheimpflug cameras. Meas. Sci. Technol. 27(9), 94004 (2016)
Xu, G., Zhang, X., Li, X., et al.: Timed evaluation of the center extraction of a moving laser stripe on a vehicle body using the Sigmoid-Gaussian function and a tracking method. Opt. (Stuttgart) 130, 1454–1461 (2017)
Ester, M., Kriegel, H. P., Sander, J., et al.: A density-based algorithm for discovering clusters in large spatial databases with noise. AAAI Press (1996)
Funding
This work was funded by the National Major Scientific Instrument Development Project: Design and Integration of Air Flotation Carrier Unit (2013YQ22074903).
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Zhang, Y., Qian, Y., Liu, S. et al. Real-time line-structured light measurement system based on Scheimpflug principle. Opt Rev 28, 471–483 (2021). https://doi.org/10.1007/s10043-021-00681-5
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10043-021-00681-5