Skip to main content
SpringerLink
Log in

The application of multi-body simulation approach in the kinematic analysis of beetle leg joints

  • Original Article
  • Published:
Artificial Life and Robotics Aims and scope Submit manuscript

Abstract

Locomotion of insects is exceptionally efficient and this efficiency is partially due to the kinematics within leg joints, which in different movement scenarios depends on their inner contacting conditions. The investigation of functionality of the leg joints can potentially provide new innovative problem solutions in robotics. The previously published information about the shape of the joints is not sufficient, because without knowledge about the movements of the articulating surfaces within the joint, the kinematics cannot be understood. To understand the joint movements, we have performed motion tracking experiments in the beetle Pachnoda marginata (Scarabaeidae, Cetoniinae) in different locomotory scenarios. We aimed at understanding the range of motion within single leg joints depending on their function in the entire leg movement scenario. For this purpose, we combined the motion analysis of living beetles with the results of the simulation of a multi-body system. The results of the multi-body simulation allowed the kinematic characterization of articulating joints by their degrees of freedom and the identification of the rotation axes. The simulated range of motion predicted by the limitations of the exoskeleton of the joints partially matched those obtained from the motion analysis of the living beetle. We showed that the range of motion of the single leg joints depends strongly on the type of the beetle locomotory scenario. It is also concluded that the simulation of multi-body systems is a powerful tool for the kinematic analysis of insect tribological systems.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10

Similar content being viewed by others

References

  1. Ritzmann RE, Zill SN (2003) Walking and jumping. In: Resh VH, Carde RT (eds) Encyclopedia of insects. Academic Press, San Diego CA, USA, pp 1174–1179

    Google Scholar 

  2. Cruse H (1976) The function of the legs in the free walking stick insect, Carausius morosus. J Comp Physiol A 112(2):235–262

    Article  Google Scholar 

  3. Baessler U, Bueschges A (1998) Pattern generation for stick insect walking movements—multisensory control of a locomotor program. Brain Res Rev 27(1):65–88

    Article  Google Scholar 

  4. Nye SW, Ritzmann RE (1992) Motion analysis of leg joints associated with escape turns of the cockroach, Periplaneta americana. J Comp Physiol A 171(2):183–194

    Article  Google Scholar 

  5. Espenschied KS, Chiel HJ, Quinn RD, Beer RD (1993) Leg coordination mechanisms in the stick insect applied to hexapod robot locomotion. Adapt Behav 1(4):455–468

    Article  Google Scholar 

  6. Mueller-Wilm U, Cruse H, Eltze J, Dean J, Weidemann HJ, Pfeiffer F (1992) Kinematic Model of a stick insect as an example of a six-legged walking system. Adapt Behav 1(2):155–169

    Article  Google Scholar 

  7. Cruse H, Bartling C (1995) Movement of joint angles in the legs of a walking insect, Carausius morosus. J Insect Physiol 41(9):761–771

    Article  Google Scholar 

  8. Cruse H, Duerr V, Schmitz J (2007) Insect walking is based on a decentralized architecture revealing a simple and robust controller. Philos Trans R Soc A 365(1850):221–250

    Article  MathSciNet  Google Scholar 

  9. Duerr V, Schmitz J, Cruse H (2004) Behaviour-based modelling of hexapod locomotion: linking biology and technical application. Arthropod Struct Develop 33(3):237–250

    Article  Google Scholar 

  10. Burns MD (1973) The control of walking in Orthoptera: I. Leg movements in normal walking. J Exp Biol 58(1):45–58

    Google Scholar 

  11. Delcomyn F, Usherwood DNR (1973) Motor activity during walking in cockroach Periplaneta americana. 1. Free walking. J Exp Biol 59(3):643–654

    Google Scholar 

  12. Watson JT, Ritzmann RE (1998) Leg kinematics and muscle activity during treadmill running in the cockroach, Blaberus discoidalis: I. Slow running. J Comp Physiol A 182(1):11–22

    Article  Google Scholar 

  13. Gorb SN (1996) Design of insect unguitractor apparatus. J Morphol 230:219–230

    Article  Google Scholar 

  14. Gorb SN (2001) Attachment devices of insect cuticle. Kluwer Academic, Dordrecht

    Google Scholar 

  15. Wan C, Hao Z, Feng X (2016) Structures, properties, and energy-storage mechanisms of the semi-lunar process cuticles in locusts. Sci Rep 6:35219. doi:10.1038/srep35219

    Article  Google Scholar 

  16. Gorb SN (1995) Design of the predatory legs of water bugs (Hemiptera: Nepidae, Naucoridae, Notonectidae, Gerridae). J Morphol 223(3):289–302

    Article  Google Scholar 

  17. Gorb SN (2004) The jumping mechanism of cicada Cercopis vulnerata (Auchenorrhyncha, Cercopidae): skeleton-muscle organisation, frictional surfaces, and inverse-kinematic model of leg movements. Arthropod Struct Dev 33:201–220

    Article  Google Scholar 

  18. Frantsevich L, Shumakova I, Mokrushov P, Gorb S (1996) Insect rope-walkers: kinematics of walking on thin rods in a bug, Graphosoma italicum (Heteroptera; Pentatomidae). J Zool (London) 238:713–724

    Article  Google Scholar 

  19. Frantsevich L (2004) Righting kinematics in beetles (Insecta: Coleoptera). Arthropod Struct Dev 33(3):221–235

    Article  Google Scholar 

  20. Frantsevich L, Gorb SN (2004) Structure and mechanics of the tarsal chain in the hornet, Vespa crabro (Hymenoptera: Vespidae): implications on the attachment mechanism. Arthropod Struct Dev 33:77–89

    Article  Google Scholar 

  21. Frantsevich LI, Cruse H (2005) Leg coordination during turning on an extremely narrow substrate in a bug, Mesocerus marginatus (Heteroptera, Coreidae). J Insect Physiol 51:1092–1104

    Article  Google Scholar 

  22. Vagts S, Haschke H, Schlattmann J, Kleinteich T, Busshardt P, Pullwitt T, Gorb SN (2013) Towards understanding frictional properties of articular joints in beetle legs: µCT-based 3D model and multi-body simulation of joints kinematics. In: Proceedings of 5th World Tribology Congress, pp 3–6

  23. Spoor CW, Veldpaus FE (1980) Rigid body motion calculated from spatial co-ordinates of markers. J Biomech 13(4):391–393

    Article  Google Scholar 

  24. Fioretti S, Jetto L, Leo T (1990) Reliable in vivo estimation of the instantaneous helical axis in human segmental movements. Biomed Eng 37(4):398–409

    Google Scholar 

  25. Woltring HJ, Huiskes R, De Lange A, Veldpaus FE (1985) Finite centroid and helical axis estimation from noisy landmark measurements in the study of human joint kinematics. J Biomech 18:379–389

    Article  Google Scholar 

  26. Berme N, Cappozzo A, Meglan J (1990) Rigid body mechanics as applied to human movement studies. In: Berme N, Cappozzo A (eds) Biomechanics of human movement: applications in rehabilitation, sports and ergonomics. Worthington, Bertec

    Google Scholar 

  27. Sommer HJ, Buczeck FL (1990) Experimental determination of the instant screw axis and angular acceleration axis. In: Proceedings of the Annual Northeast Bioengineering Conference, pp 141–142

  28. Bouguet JY, Perona P (1998) Camera calibration from points and lines in dual-space geometry. In: Proc. 5th European Conf. on Computer Vision, pp 2–6

  29. Adler PH (2003) Legs. In: Resh VH, Carde RT (eds) Encyclopedia of insects. Academic Press, San Diego CA, USA, pp 627–631

    Google Scholar 

  30. Vagts S, Schlattmann J (2013) General systems theory in a horizontal and vertical action process for cross-disciplinary knowledge transfer. Proc ASME IMECE. doi:10.1115/IMECE2013-64235

    Google Scholar 

Download references

Author information

Authors and Affiliations

  1. Department of System Technologies and Engineering Design Methodology, Hamburg University of Technology, Denickestr. 22, 21079, Hamburg, Germany

    Steffen Vagts & Josef Schlattmann

  2. Department of Functional Morphology and Biomechanics, Kiel University, Am Botanischen Garten 9, 24118, Kiel, Germany

    Philipp Busshardt, Thomas Kleinteich & Stanislav N. Gorb

Authors
  1. Steffen Vagts
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Josef Schlattmann
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Philipp Busshardt
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Thomas Kleinteich
    View author publications

    You can also search for this author in PubMed Google Scholar

  5. Stanislav N. Gorb
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Steffen Vagts.

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Vagts, S., Schlattmann, J., Busshardt, P. et al. The application of multi-body simulation approach in the kinematic analysis of beetle leg joints. Artif Life Robotics 22, 412–420 (2017). https://doi.org/10.1007/s10015-017-0386-x

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s10015-017-0386-x

Keywords

Search

Navigation