Zusammenfassung
Hintergrund. Die anthropometrische Analyse des Gesichts erfolgte bisher mit den Methoden der direkten Gesichtsvermessung und der Fotogrammetrie. Beide Methoden haben Nachteile. Ziel unserer Studie war, die primäre spaltbedingte Nasendeformität mit einem videogestützten Oberflächenscanner aufzunehmen und dieses dreidimensionale Bild zu vermessen.
Patienten und Methode. Aus Gesichtsabdrücken hergestellte Modelle von 19 Patienten mit uni- und bilateraler Lippen-Kiefer-Gaumen-Spalte vor dem Lippenverschluss wurden mit dem 3D-Oberflächenscanner DSP 400 aufgenommen. Die Breite der Nasenwurzel, der Abstand der Nasenflügel und der Nasenflügelbasen, die Breite des Naseneingangs, die Protrusion der Nasenspitze und die Nasenflügellänge wurden anschließend vermessen.
Ergebnisse. Die Aufnahme war bei allen Gesichtsmodellen problemlos möglich. Vergleichende Messungen am Gipskopf und 3D-Bild korrelierten sehr gut miteinander. Es konnten damit deutliche Dimensionsunterschiede für die untersuchten Nasenparameter in Abhängigkeit von der Spaltform bestimmt werden.
Schlussfolgerung. Der vorgestellte videogestützter Oberflächenscanner erlaubte die dreidimensionale Aufnahme des Gesichts ohne Zeitverzögerung. Mit Hilfe entsprechender Software konnte die geschaffene Oberfläche exakt vermessen werden. Mit dem vorgestellten System konnten Messergebnisse erzielt werden, die mit der bekannten Literatur übereinstimmten.
Abstract
Background. Anthropometric analysis of the face has been performed with direct facial measurement and photogrammetry. Both methods have disadvantages. The aim of our investigation was to create a three-dimensional image of the primary cleft nasal deformity with a video scanner and to carry out linear measurements.
Material and methods. Facial plaster casts of 19 patients with uni- and bilateral cleft lip and palate before primary lip repair were scanned with digital surface photogrammetry DSP 400. The width of the nose and of the nostril floor, the distance of the alar bases, the length of the ala, and the nasal tip protrusion were measured.
Results. Imaging was possible without problems in all models. Direct measurements of the model correlated well with the results of the three-dimensional image. Significant dimensional differences of the nasal parameters examined were noted, depending on the cleft type.
Discussion. A video-supported surface scanner allowed immediate three-dimensional imaging of the face. The computer software analyzed the generated surface exactly. The data measured with the presented system resembled other previously published results.
Author information
Authors and Affiliations
Additional information
Electronic Publication
Rights and permissions
About this article
Cite this article
Krimmel, M., Bacher, M., Cornelius, C.P. et al. Dreidimensionale Bildakquisition zur Analyse der primären, spaltbedingten Gesichtsdeformität mit einem optoelektronischen Oberflächenscanner. Mund Kiefer GesichtsChir 6, 158–161 (2002). https://doi.org/10.1007/s10006-002-0379-2
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10006-002-0379-2