Skip to main content
Log in

Experimental Study on Rock Strength and Deformation Characteristics Under Triaxial Cyclic Loading and Unloading Conditions

  • Original Paper
  • Published:
Rock Mechanics and Rock Engineering Aims and scope Submit manuscript

Abstract

The mechanical behavior of rock under cyclic loading is quite complicated compared to monotonic loading or unloading conditions. The triaxial cyclic loading and unloading testing of rock specimens under 6 confining pressures (σ3) was carried out through the MTS 815 rock mechanics testing system, to explore the strength, deformation, and expansion characteristics of the rock specimens. The stress–strain curves of the rock specimens in the triaxial cyclic loading and unloading testing presented the hysteresis effect. Besides, as σ3 increased, the rock specimen strength increased, while the failure form brittle to ductile. The elasticity modulus (El) increased first and consequently decreased as the cycle index increased, while it increased as σ3 increased. However, the generalized Poisson’s ratio (μl) increased as the cycle index increased, whereas it decreased as the σ3 increased. Based on the Mohr–Coulomb strength criterion and plastic shear strain (γp) as the plastic parameter, the subsequent yield plane model of the loaded rock was characterized by generalized cohesion () and generalized internal friction angle (φ´). Ultimately, the evolution rules of c´, φ´ and Ψ (dilatancy angle), with σ3 and γp were revealed. Moreover, the post-peak dilatancy angle models with regard to the influence of σ3 and γp on the volume dilatancy of the rock specimen were established, which indicated that Ψ increased first and consequently decreased along with the γp increase, whereas it decreased as the σ3 increased.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13
Fig. 14
Fig. 15
Fig. 16
Fig. 17

Similar content being viewed by others

References

Download references

Acknowledgements

The financial and general supports for this research provided by the National Natural Science Foundation of China (Nos. 51704280, 51809263, U1803118) and the Key Laboratory of Deep Earth Science and Engineering (Sichuan University), Ministry of Education (Nos. DESE201907, DESE201906).

Author information

Authors and Affiliations

Authors

Corresponding authors

Correspondence to Jiang-Feng Liu or Li Ren.

Additional information

Publisher's Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Meng, Qb., Liu, JF., Ren, L. et al. Experimental Study on Rock Strength and Deformation Characteristics Under Triaxial Cyclic Loading and Unloading Conditions. Rock Mech Rock Eng 54, 777–797 (2021). https://doi.org/10.1007/s00603-020-02289-8

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s00603-020-02289-8

Keywords

Navigation