References
Bras A, Gião R, Lúcio V, Chastre C (2013) Development of an injectable grout for concrete repair and strengthening. Cem Concr Comp 37:185–195
Butron C, Gustafson G, Fransson A, Funehag J (2010) Drip sealing of tunnels in hard rock: a new concept for the design and evaluation of permeation grouting. Tunn Undergr Sp Tech 25(2):114–121
Deere DU (1982) Cement-bentonite grouting for dams. American Society of Civil Engineers, Geotechnical Engineering Specialty Conference on Grouting, New Orleans, February 10–12, pp 279–300
Eklund D, Stille H (2008) Penetrability due to filtration tendency of cement-based grouts. Tunn Undergr Sp Tech 23(4):389–398
El Tani M (2012) Grouting Rock Fractures with Cement Grout. Rock Mech Rock Eng 45(4):547–561
Ewert FK (1985) Rock grouting with emphasis on dam sites, Springer-verlag, Berlin, New York, 428 p
Hoien AH, Nilson B (2013) Rock mass grouting in the Løren tunnel: case study with the main focus on the groutability and feasibility of drill parameter interpretation. Rock Mech Rock Eng 47(3):967–983
Lim SK, Tan CS, Chen KP, Lee ML, Lee WP (2013) Effect of different sand grading on strength properties of cement grout. Constr Build Mater 38:348–355
PTCI.186 (2000) Guideline for grouting in hydro-structures. Letter no. 186. Publications and technical criteria Iran (PTCI), Plan and Budget Organization-Ministry of Energy. Tehran, Iran, in Persian. Available on the mporg website. http://tec.mporg.ir/. Accessed 25 Sept 2012
Rafi JY (2010) Applying "real time grouting control method" in sedimentary rock with gotvand dam data. Master of Science thesis, Division of Soil and Rock Mechanics, Royal Institute of Technology, Stockholm, Sweden
Rostami Barani HR, Lashkaripour GL, Ghafoori M (2014) Predictive permeability model of faults in crystalline rocks; verification by Joint Hydraulic factor (JH) obtained from water pressure tests. J Earth Syst Sci 123(6):1325–1334
Saeidi O, Stille H, Torabi SR (2013) Numerical and analytical analyses of the effects of different joint and grout properties on the rock mass groutability. Tunn Undergr Sp Tech 38:11–25
T-Mahar Ab Engineering Company (T-MAECO) (2011) Engineering geology report of Sumbar dam site; Sumbar Project, vol. 2. Ministry of Energy. Mashhad, Iran, in Persian
T-Mahar Ab Engineering Company (T-MAECO) (2012) Method statement for drilling and grouting works report of Sumbar dam site; Sumbar Project, vol. 9. Ministry of Energy. Mashhad, Iran, in Persian
Turkmen S (2003) Treatment of the seepage problems at the Kalecik Dam (Turkey). Eng Geol 68(3–4):159–169
Acknowledgments
I would like to express my sincere thanks to Prof Giovanni Barla (Editor) for his great help, and to the reviewers for their beneficial suggestions and comments to improve this paper. The author also wishes to thank many engineers, geologists and technical staff of T-Mahar Ab Engineering Company (T-MAECO) for facilitating access to the dam data.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Rostami Barani, H.R., Khatib, M.M. Back Analysis of Grout Treatment at Sumbar Dam Using the Joint Hydraulic Factor. Rock Mech Rock Eng 48, 2485–2488 (2015). https://doi.org/10.1007/s00603-014-0706-6
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00603-014-0706-6