References
Liacouras P, Garnes J, Roman N, Petrich A, Grant GT (2011) Designing and manufacturing an auricular prosthesis using computed tomography, 3-dimensional photographic imaging, and additive manufacturing: a clinical report. J Prosthet Dent 105(2):78–82
Subburaj K, Nair C, Rajesh S, Meshram SM, Ravi B (2007) Rapid development of auricular prosthesis using CAD and rapid prototyping technologies. Int J Oral Maxillofac Surg 36(10):938–943
Ciocca L, Scotti R (2004) CAD–CAM-generated ear cast by means of a laser scanner and rapid prototyping machine. J Prosthet Dent 92(6):591–595
Tsuji M, Noguchi N, Ihara K, Yamashita Y, Shikimori M, Goto M (2004) Fabrication of a maxillofacial prosthesis using a computer-aided design and manufacturing system. J Prosthodont 13(3):179–183
Ciocca L, Mingucci R, Gassino G, Scotti R (2007) CAD/CAM ear model and virtual construction of the mold. J Prosthet Dent 98(5):339–343
Acknowledgments
Mr Gabriel Teo (Visual effect artist of the Academy of Media Arts): CAD processing of digital data and 3D reconstruction of mold. Miss Sydnie Wach (Academy of Media Arts): assistance in setting up and co-ordinating
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Financial disclosure
N/A
Conflict of Interest
N/A
Patient Consent
The patient/next of kin/guardian has consented to the submission of this letter for submission to the journal.
Rights and permissions
About this article
Cite this article
Chiu, M., Hong, S.C. & Wilson, G. Digital fabrication of orbital prosthesis mold using 3D photography and computer-aided design. Graefes Arch Clin Exp Ophthalmol 255, 425–426 (2017). https://doi.org/10.1007/s00417-016-3544-2
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00417-016-3544-2