Abstract
We examined the effect of interfacially active particles on the morphology and rheology of droplet/matrix blends of two immiscible homopolymers. Experiments were conducted on polybutadiene/polydimethylsiloxane (10/90) blend and the inverse system. The effects of fumed silica nanoparticles, at low particle loadings (0.1–2.0 wt%), were examined by direct flow visualization and by rheology. Fumed silica nanoparticles were found to significantly affect the morphology of polymer blends, inducing droplet cluster structure and decreasing the droplet size, regardless of which phase wets the particles preferentially. This is surprising in light of much past research that shows that particles are capable of bridging and thus induce droplet cluster structure in droplet/matrix systems only when they are preferentially wetted by the continuous phase. Therefore, there should exist other possible mechanisms responsible for these droplet cluster structures except for the bridging mechanism. We proposed a particle-flocculating mechanism based on the fact that fumed silica particles readily flocculate due to their high aspect ratio, fractal-like shape, or interparticle attractions. Optical microscopy also reveals that the clustering structure becomes more extensive, and the droplet sizes in the clusters become smaller when the particle loading is increased. Rheologically, the chief effect of particles is to change the flow behavior from a liquid-like rheology to gel-like behavior. This gel-like behavior can be attributed to droplet clustering. Moreover, it should be emphasized that such gel-like behavior can be seen in the blends regardless of which phase wets the particles preferentially, suggesting that, once again, bridging is not the only cause of droplet clustering.
Similar content being viewed by others
References
Aveyard R, Binks BP, Clint JH (2003) Emulsions stabilised solely by colloidal particles. Adv Colloid Interfac 100:503–546
Binks BP (2002) Particles as surfactants—similarities and differences. Curr Opin Colloid I(7):21–41
Binks BP (2007) Colloidal particles at liquid interfaces. Phys Chem Chem Phys 9:6298–6299
Binks BP, Clint JH (2002) Solid wettability from surface energy components: relevance to pickering emulsions. Langmuir 18:1270–1273
Binks BP, Lumsdon SO (2000) Influence of particle wettability on the type and stability of surfactant-free emulsions. Langmuir 16:8622–8631
Clarke J, Clarke B, Freakley PK, Sutherland I (2001) Compatibilising effect of carbon black on morphology of NR-NBR blends. Plast Rubber Compos 30:39–44
DeLeo CL, Velankar SS (2008) Morphology and rheology of compatibilized polymer blends: diblock compatibilizers vs crosslinked reactive compatibilizers. J Rheol 52:1385–1404
Elias L, Fenouillot F, Majeste JC, Cassagnau P (2007) Morphology and rheology of immiscible polymer blends filled with silica nanoparticles. Polymer 48:6029–6040
Gubbels F, Jerome R, Vanlathem E, Deltour R, Blacher S, Brouers F (1998) Kinetic and thermodynamic control of the selective localization of carbon black at the interface of immiscible polymer blends. Chem Mater 10:1227–1235
Guido S, Villone M (1999) Measurement of interfacial tension by drop retraction analysis. J Colloid Interf Sci 209:247–250
Herzig EM, White KA, Schofield AB, Poon WCK, Clegg PS (2007) Bicontinuous emulsions stabilized solely by colloidal particles. Nat Mater 6:966–971
Hong JS, Namkung H, Ahn KH, Lee SJ, Kim C (2006) The role of organically modified layered silicate in the breakup and coalescence of droplets in PBT/PE blends. Polymer 47:3967–3975
Hong JS, Kim YK, Ahn KH, Lee SJ, Kim C (2007) Interfacial tension reduction in PBT/PE/clay nanocomposite. Rheol Acta 46:469–478
Horozov TS, Binks BP (2006) Particle-stabilized emulsions: a bilayer or a bridging monolayer Angew Chem Int Edit 45:773–776
Ibarra-Gomez R, Marquez A, Valle LFRD, Rodriguez-Fernandez OS (2003) Influence of the blend viscosity and interface energies on the preferential location of CB and conductivity of BR/EPDM blends. Rubber Chem Technol 76:969–978
Katada A, Buys YF, Tominaga Y, Asai S, Sumita M (2005) Relationship between electrical resistivity and particle dispersion state for carbon black filled poly (ethylene-co-vinyl acetate)/poly (l-lactic acid) blend. Colloid Polym Sci 284:134–141
Koos E, Willenbacher N (2011) Capillary forces in suspension rheology. Science 331:897–900
Lee LH (1967) Adhesion of high polymers. 2. wettability of elastomers. J Polym Sci A2(5):1103–1118
Lee MN, Chan HK, Mohraz A (2012) Characteristics of Pickering emulsion gels formed by droplet bridging. Langmuir 28:3085–3091
Li L, Miesch C, Sudeep PK, Balazs AC, Emrick T, Russell TP, Hayward RC (2011) Kinetically trapped co-continuous polymer morphologies through intraphase gelation of nanoparticles. Nano Lett 11:1997–2003
Liu YQ, Kontopoulou M (2006) The structure and physical properties of polypropylene and thermoplastic olefin nanocomposites containing nanosilica. Polymer 47:7731–7739
Maiti S, De SK, Bhowmick AK (1992) Quantitative estimation of filler distribution in immiscible rubber blends by mechanical damping studies. Rubber Chem Technol 65:293–302
Martin JD, Velankar SS (2007) Effects of compatibilizer on immiscible polymer blends near phase inversion. J Rheol 51:669–692
Nagarkar SP, Velankar SS (2012) Morphology and rheology of ternary fluid-fluid-solid systems. Soft Matter 8:8464–8477
Owens DK, Wendt RC (1969) Estimation of surface free energy of polymers. J Appl Polym Sci 13:1741–1747
Palierne JF (1990) Linear rheology of viscoelastic emulsions with interfacial-tension. Rheol Acta 29:204–214
Pawar AB, Caggioni M, Ergun R, Hartel RW, Spicer PT (2011) Arrested coalescence in Pickering emulsions. Soft Matter 7:7710–7716
Pawar AB, Caggioni M, Hartel RW, Spicer PT (2012) Arrested coalescence of viscoelastic droplets with internal microstructure. Faraday Discuss 158:341–350
Pham KN, Petekidis G, Vlassopoulos D, Egelhaaf SU, Poon WCK, Pusey PN (2008) Yielding behavior of repulsion - and attraction-dominated colloidal glasses. J Rheol 52:649–676
Pickering SU (1907) Emulsions. J Chem Soc 91:2001–2021
Ramsden W (1903) Separation of solids in the surface-layers of solutions and ’suspensions’ (observations on surface-membranes, bubbles, emulsions, and mechanical coagulation). preliminary account. P R Soc London 72:156–164
Ray SS, Bousmina M (2005) Effect of organic modification on the compatibilization efficiency of clay in an immiscible polymer blend. Macromol Rapid Comm 26:1639–1646
Si M, Araki T, Ade H, Kilcoyne ALD, Fisher R, Sokolov JC, Rafailovich MH (2006) Compatibilizing bulk polymer blends by using organoclays. Macromolecules 39:4793–4801
Tambe DE, Sharma MM (1994) The effect of colloidal particles on fluid-fluid interfacial properties and emulsion stability. Adv Colloid Interfac 52:1–63
Thareja P, Velankar S (2007) Particle-induced bridging in immiscible polymer blends. Rheol Acta 46:405–412
Thareja P, Velankar S (2008a) Rheology of immiscible blends with particle-induced drop clusters. Rheol Acta 47:189–200
Thareja P, Velankar SS (2008b) Interfacial activity of particles at PI/PDMS and PI/PIB interfaces: analysis based on Girifalco-Good theory. Colloid Polym Sci 286:1257–1264
Thareja P, Moritz K, Velankar SS (2010) Interfacially active particles in droplet/matrix blends of model immiscible homopolymers: particles can increase or decrease drop size. Rheol Acta 49:285–298
Vandebril S, Vermant J, Moldenaers P (2010) Efficiently suppressing coalescence in polymer blends using nanoparticles: role of interfacial rheology. Soft Matter 6:3353–3362
Vermant J, Cioccolo G, Nair KG, Moldenaers P (2004) Coalescence suppression in model immiscible polymer blends by nano-sized colloidal particles. Rheol Acta 43:529–538
Ziegler VE, Wolf BA (2004) Interfacial tensions from drop retraction versus pendant drop data and polydispersity effects. Langmuir 20:8688–8692
Acknowledgments
This work is subsidized by the National Basic Research Program of China (973 Program, 2012CB821500) and supported by the National Natural Science Foundation of China (21222407, 21074137, 50930001) programs.
Author information
Authors and Affiliations
Corresponding author
Electronic supplementary material
Below is the link to the electronic supplementary material.
Rights and permissions
About this article
Cite this article
Zou, ZM., Sun, ZY. & An, LJ. Effect of fumed silica nanoparticles on the morphology and rheology of immiscible polymer blends. Rheol Acta 53, 43–53 (2014). https://doi.org/10.1007/s00397-013-0740-4
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00397-013-0740-4