Skip to main content
SpringerLink
Log in

Representing and analysing integrated engineering systems through combinatorial representations

  • Original Article
  • Published:
Engineering with Computers Aims and scope Submit manuscript

Abstract

The current paper introduces a systematic method for representing and analysing coupled integrated engineering systems by means of general discrete mathematical models, called Combinatorial Representations, that can be conveniently implemented in computers. The combinatorial representation of this paper, which is based on graph theory, was previously shown to be useful in representing engineering systems from different engineering domains. Once all of the subsystems of an integrated multidisciplinary system are brought up to the common level of the combinatorial representation, they cease to be separated from one another and the analysis process is applied to all of the engineering elements disregarding the domain to which they belong.

During the development of the representation and study of its inherent properties, special attention was dedicated to developing an efficient analysis method. A vectorial extension of the mixed variable method known from electrical network theory was found to be the most suitable choice for this purpose.

In the paper, the approach is implemented by representing and analysing two systems: one that is a macro system comprised of truss, dynamic and electric elements, and another that is a comb-driven micro-resonator. The techniques presented in the paper are not limited to analysis only, but can be applied to many other aspects of engineering research. Among them is a systematic derivation of new ways of presenting engineering elements, one of which – the process of derivation of a new type of force representation entitled “face force” – is described in the paper.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11

Similar content being viewed by others

Abbreviations

CR:

Combinatorial Representations

FCFS:

Flow Controlled Flow Source

FCPS:

Flow Controlled Potential difference Source

FGR:

Flow Graph Representation

MCA:

Multidisciplinary Combinatorial Approach

PCFS:

Potential difference Controlled Flow Source

PCPS:

Potential difference Controlled Potential difference Source

PGR:

Potential Graph Representation

RGR:

Resistance Graph Representation

References

  1. Shai O (2001) The duality relation between mechanisms and trusses. Mech Mach Theory 36(3):343–369

    Article  MATH  Google Scholar 

  2. Shai O (2001) The multidisciplinary combinatorial approach and its applications in engineering. AI EDAM 15(2):109–144

    Article  MATH  Google Scholar 

  3. Shai O (2002) Utilization of the dualism between determinate trusses and mechanisms. Mech Mach Theory 37:1307–1323

    Article  MATH  Google Scholar 

  4. Shai O (2001) Combinatorial Representations in Structural Analysis. J Comput Civil Eng 15(3):193 – 207

    Article  Google Scholar 

  5. Seshu S, Reed MB (1961) Linear Graphs and Electrical Networks. Addison-Wesley, Boston, MA

  6. Trent HM (1955) Isomorphisms between oriented linear graphs and lumped physical systems. J Acoust Society Am 27(3):500–527

    Google Scholar 

  7. Andrews GC (1971) The vector-network model – a topological approach to mechanics. PhD Thesis, University of Waterloo, Ontario, Canada

  8. McPhee JJ (1996) On the use of linear graph theory in multibody system dynamics. Nonlinear Dynam 9:73–90

    Google Scholar 

  9. Fenves SJ, Branin FH (1963) Network topological formulation of structural analysis. J Struct Div-ASCE 89(ST4):483–514

    Google Scholar 

  10. Kaveh A (1997) Optimal structural analysis. Research Studies Press, Baldock, Hertfordshire, UK

  11. Paul B (1960) A unified criterion for the degree of constraint of plane kinematic chains. J Appl Mech-T ASME 27:196–200

    Google Scholar 

  12. Dobrjanskyj L (1966) Application of graph theory to the structural classification of mechanisms. PhD Thesis, Columbia University, New York

  13. Diaz-Calderon A (2000) A composable simulation environment to support the design of mechatronic systems. PhD Dissertation, Carnegie Mellon University, Pittsburgh, PA

  14. Cha DP, Rosenberg JJ, Dym CL (2000) Fundamentals of modeling and analyzing engineering systems. Cambridge University Press, Cambridge, UK

  15. Martens HR, Allen DR (1969) Introduction to systems theory. C.E. Merrill, Columbus, OH

  16. Kron G (1963) Diakoptics – the piecewise solution of large-scale systems. Macdonald, London

  17. Senturia S (2001) Microsystem design. Kluwer Academic, Boston, MA

  18. Swamy MN, Thulasiraman K (1981) Graphs: networks and algorithms. Wiley, New York

  19. Balabanian N, Bickart TA (1969) Electrical network theory. Wiley, New York

  20. Shearer JL, Murphy AT, Richardson HH (1971) Introduction to system dynamics. Addison-Wesley, Boston, MA

  21. Tang WC (1990) Electrostatic comb drive for resonant sensor and actuator applications. PhD Thesis, University of California, CA

  22. Tilmans HAC (1996) Equivalent circuit representation of electromechanical transducers: I. Lumped-parameter systems. J Micromech Microeng 6:157–176

    Article  Google Scholar 

Download references

Acknowledgements

This research work was supported by the Fleishman Grant from the Engineering Faculty of Tel-Aviv University.

Author information

Authors and Affiliations

  1. Department of Mechanics, Materials and Systems, Faculty of Engineering, Tel-Aviv University, 69978, Tel Aviv, Israel

    Offer Shai & Daniel Rubin

Authors
  1. Offer Shai
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Daniel Rubin
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Offer Shai.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Shai, O., Rubin, D. Representing and analysing integrated engineering systems through combinatorial representations. Engineering with Computers 19, 221–232 (2004). https://doi.org/10.1007/s00366-003-0262-2

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s00366-003-0262-2

Keywords

Search

Navigation