Abstract.
Two numerical techniques are used in recent regional high-frequency geoid computations in Canada: discrete numerical integration and fast Fourier transform. These two techniques have been tested for their numerical accuracy using a synthetic gravity field. The synthetic field was generated by artificially extending the EGM96 spherical harmonic coefficients to degree 2160, which is commensurate with the regular 5′ geographical grid used in Canada. This field was used to generate self-consistent sets of synthetic gravity anomalies and synthetic geoid heights with different degree variance spectra, which were used as control on the numerical geoid computation techniques. Both the discrete integration and the fast Fourier transform were applied within a 6∘ spherical cap centered at each computation point. The effect of the gravity data outside the spherical cap was computed using the spheroidal Molodenskij approach. Comparisons of these geoid solutions with the synthetic geoid heights over western Canada indicate that the high-frequency geoid can be computed with an accuracy of approximately 1 cm using the modified Stokes technique, with discrete numerical integration giving a slightly, though not significantly, better result than fast Fourier transform.
Similar content being viewed by others
Author information
Authors and Affiliations
Additional information
Received: 2 November 1999 / Accepted: 11 July 2000
Rights and permissions
About this article
Cite this article
Novák, P., Vaníc˘ek, P., Véronneau, M. et al. On the accuracy of modified Stokes's integration in high-frequency gravimetric geoid determination. Journal of Geodesy 74, 644–654 (2001). https://doi.org/10.1007/s001900000126
Issue Date:
DOI: https://doi.org/10.1007/s001900000126