Abstract
Helical milling is used to generate holes with a cutting tool traveling on a helical path into the workpiece in which the diameter of the hole can be adjusted through that of the helical path. Based on an improved Z-map model, a 3D surface topography simulation model is established to simulate the surface finish profile generated after a helical milling operation using a cylindrical end mill. The surface topography simulation model incorporates the effects of the relative motion between the cutting tool and the workpiece, in which the effect of the insert runout error of the cutting tool is considered. Furthermore, the roughness parameters are deduced from simulations of the 3D surface topography. The experimental result shows that the proposed simulation algorithm can predict well the surface roughness in a helical milling operation. The surface topography simulation model is used to study the effects of cutting conditions such as the tangential feedrate, the diameter of the cutting tool and the hole, the insert runout error of the cutting tool, as well as the revolution of the cutting tool around the axis of the hole on the surface finish profile. It is found that the surface quality can be improved by optimization of the cutting conditions. As a result, the proposed model will be helpful in determining the cutting conditions to meet surface finish requirements in helical milling operation.
Similar content being viewed by others
References
Lin SC, Chang MF (1998) A study on the effects of vibrations on the surface finish using a surface topography simulation model for turning. Int J Mach Tools Manuf 38:763–782
Baek DK, Ko TJ, Kim HS (2001) Optimization of feedrate in a face milling operation using a surface roughness model. Int J Mach Tools Manuf 41:451–462
Antoniadis A, Savakis C, Bilalis N, Balouktsis A (2003) Prediction of surface topomorphy and roughness in ball-end milling. Int J Adv Manuf Technol 21:965–971
Omar OEEK, EI-Wardany T, Ng E, Elbestawi MA (2007) An improved cutting force and surface topography prediction model in end milling. Int J Mach Tools Manuf 47:1263–1275
Li ZQ, Li S, Zhou M (2010) Surface topography prediction in high-speed end milling of flexible milling system. Appl Mech Mater 29–32:1832–1837
Li JG, Ding J, Gao D, Yao YX (2010) Quadtree-array-based workpiece geometric representation on three-axis milling process simulation. Int J Adv Manuf Technol 50:677–687
Tönshoff HK, Friemuth T, Groppe M (2001) High efficient circular milling: a solution for economical machining of bore holes in composite materials. In: Proceedings of the Third International Conference on High Speed Machining, Metz, France, 287–296
Sasahara H, Kawasaki M, Tsutsumi M (2003) Helical feed milling with MQL for boring of aluminum alloy. Nihon Kikai Gakkai Ronbunshu C 69:2156–2161
Weinert K, Kempmann C (2005) Comparing drilling and circular milling for the drill hole manufacture of fiber reinforced composites. Prod Eng Res Dev 12:1–4
Wang HY, Qin XD, Ren CZ, Wang Q (2012) Prediction of cutting forces in helical milling process. Int J Adv Manuf Technol 58:849–859
Toenshoff HK, Spintig W, Koenig W, Neises A (1994) Machining of holes: developments in drilling technology. CIRP Ann 43:551–561
Brinksmeier E, Fangmann S, Meyer I (2008) Orbital drilling kinematics. Prod Eng 2:277–283
Denkena B, Boehnke D, Dege JH (2008) Helical milling of CFRP–titanium layer compounds. CIRP J Manuf Sci Technol 1:64–69
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Li, Z., Liu, Q. Surface topography and roughness in hole-making by helical milling. Int J Adv Manuf Technol 66, 1415–1425 (2013). https://doi.org/10.1007/s00170-012-4419-2
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-012-4419-2