Skip to main content
Log in

Harmony search based algorithm for the optimum design of grillage systems to LRFD-AISC

  • Research Paper
  • Published:
Structural and Multidisciplinary Optimization Aims and scope Submit manuscript

Abstract

Harmony search based optimum design method is presented for the grillage systems. This numerical technique imitates the musical performance process that takes place when a musician searches for a better state of harmony. Jazz improvisation seeks to find musically pleasing harmony similar to the optimum design process which seeks to find the optimum solution. The design algorithm considers the serviceability and ultimate strength constraints which are implemented from Load and Resistance Factor Design—American Institute of Steel Construction (LRFD-AISC). It selects the appropriate W-sections for the transverse and longitudinal beams of the grillage system out of 272 discrete W-section designations given in LRFD-AISC. This selection is carried out such that the design limitations described in LRFD-AISC are satisfied and the weight of the system is the minimum. Many design examples are considered to demonstrate the efficiency of the algorithm presented.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Similar content being viewed by others

References

  • Adeli H, Kumar S (1995) Distributed genetic algorithm for structural optimization. J Aerosp Eng 8:156–163

    Article  Google Scholar 

  • Bennage WA, Dhingra A-K (1995) Single and multi-objective structural optimization in discrete-continuous variables using simulated annealing. Int J Numer Methods Eng 38:2753–2773

    Article  MATH  Google Scholar 

  • Bonabeau E, Dorigo M, Theraulaz G (1999) Swarm intelligence: from natural to artificial systems. Oxford University Press, Oxford

    MATH  Google Scholar 

  • Camp CV, Barron JB (2004) Design of space trusses using ant colony optimization. J Struct Eng 130:741–751

    Article  Google Scholar 

  • Camp CV, Barron JB, Scott PS (2005) Design of steel frames using ant colony optimization. J Struct Eng 131:369–379

    Article  Google Scholar 

  • Camp C, Pezeshk S, Cow G (1998) Optimized design of two-dimensional structures using a genetic algorithm. J Struct Eng 124:551–559

    Article  Google Scholar 

  • Dasgupta D (1999) Artificial immune systems and their applications. Springer, Berlin Heidelberg New York

    MATH  Google Scholar 

  • Dorigo M (1992) Optimization, learning and natural algorithms. (in Italian). PhD thesis, Dipartimento di Elettronica e Informazione, Politecnico di Milano, IT

  • Dorigo M, Caro GD, Gambardella LM (1999) An algorithm for discrete optimization. Artif Life 5:137–172

    Article  Google Scholar 

  • Erbatur F, Hasancebi O, Tutuncil I, Kilci H (2000) Optimum design of planar and space structures with genetic algorithms. J Comput Struct 75:209–224

    Article  Google Scholar 

  • Erdal F (2007) Optimum design of grillage systems using harmony search algorithm. MSc thesis, Engineering Sciences Department, Middle East Technical University

  • Gallagher RH, Zienkiewicz OC (1973) Optimum structural design: theory and application. Wiley, New York

    Google Scholar 

  • Geem ZW (2006a) Improved harmony search from ensemble of music players. Lect Notes Artif Intell 4251:86–93

    Article  Google Scholar 

  • Geem ZW (2006b) Optimal cost design of water distribution networks using harmony search. Eng Optim 38:259–280

    Article  Google Scholar 

  • Geem ZW, Kim JH (2001) A new heuristic optimization algorithm: harmony search. Simulation 76:60–68

    Article  Google Scholar 

  • Geem ZW, Kim JH, Loganathan GV (2002) Harmony search optimization: application to pipe network design. Int J Model Simul 22:125–133

    Google Scholar 

  • Goldberg DE (1989) Genetic algorithm in search optimization and machine learning. Addison Wesley, Reading

    Google Scholar 

  • Kameshki ES, Saka MP (2001a) Genetic algorithm based optimum bracing design of non-swaying tall plane frames. J Constr Steel Res 57:1081–1097

    Article  Google Scholar 

  • Kameshki ES, Saka MP (2001b) Optimum design of nonlinear steel frames with semi-rigid connections using a genetic algorithm. J Comput Struct 79:1593–1604

    Article  Google Scholar 

  • Kameshki ES, Saka MP (2003) Genetic algorithm based optimum design of nonlinear planar steel frames with various semi-rigid connections. J Constr Steel Res 59:109–134

    Article  Google Scholar 

  • Koumousis VK, Georgious PG (1994) Genetic algorithms in discrete optimization of steel truss roofs. J Comput Civ Eng 8:309–325

    Article  Google Scholar 

  • Lee KS, Geem ZW (2004) A new structural optimization method based on harmony search algorithm. Comput Struct 82:781–798

    Article  Google Scholar 

  • Lee KS, Geem ZW (2005) A new meta-heuristic algorithm for continuous engineering optimization: harmony search theory and practice. Comput Methods Appl Mech Eng 194:36–38, 3902–3933

    Article  Google Scholar 

  • Leite JPB, Topping BHV (1999) Parallel simulated annealing for structural optimization. J Comput Struct 73:545–569

    Article  MATH  Google Scholar 

  • LRFD-AISC, Manual of Steel Construction (1999) Load and resistance factor design. Metric conversion of the second edition, vols 1 & 2. AISC, Chicago

    Google Scholar 

  • Luh G-C, Chueh C-H (2004) Multi-objective optimal design of truss structure with immune algorithm. J Comput Struct 82:829–844

    Article  MathSciNet  Google Scholar 

  • Matheck C (1998) Design in nature: learning from trees. Springer, Berlin Heidelberg New York

    Google Scholar 

  • Pezeshk S, Camp CV, Clem D (2000) Design of nonlinear framed structures using genetic optimization. J Struct Eng 126:382–383

    Article  Google Scholar 

  • Rajev S, Krishhnamoorty OS (1992) Discrete optimization of structures using genetic algorithms. J Struct Eng 118: 1233–1250

    Article  Google Scholar 

  • Reeves CR (1993) Modern heuristic techniques for combinatorial problems. Blackwell, Oxford

    MATH  Google Scholar 

  • Saka MP (1981) Optimum design of grillages including warping. In: Proc. of international symposium on optimum structural design, Tucson, 19–22 October 1981, pp 9.13–9.20

  • Saka MP (1987) Optimum design of steel grillage systems. In: Proc. of the third international conference on steel structures, Singapore, March 1987, pp 273–290

  • Saka MP (1998) Optimum design of steel grillage systems using genetic algorithms. Comput Aided Civil Infrastruct Eng 13:233–238

    Google Scholar 

  • Saka MP (2003) Optimum design of pitched roof steel frames with haunched rafters by genetic algorithm. J Comput Struct 81:1967–1978

    Article  Google Scholar 

  • Saka MP, Daloglu A, Malhas F (2000) Optimum spacing design of grillage systems using a genetic algorithm. Adv Eng Softw 31:863–873

    Article  MATH  Google Scholar 

  • Van Laarhoven PJM, Aaarts EHL (1998) Simulated annealing, theory and applications. Kluwer, Boston

    Google Scholar 

  • Xie YM, Steven GP (1997) Evolutionary structural optimization. Springer, Berlin Heidelberg New York

    MATH  Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to M. P. Saka.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Saka, M.P., Erdal, F. Harmony search based algorithm for the optimum design of grillage systems to LRFD-AISC. Struct Multidisc Optim 38, 25–41 (2009). https://doi.org/10.1007/s00158-008-0263-2

Download citation

  • Received:

  • Revised:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s00158-008-0263-2

Keywords

Navigation