Abstract
Panel products have been joined to levels satisfying the requirements of the relevant standards for metallic connector assemblies by rotation welding of beech dowels through them. The wood panels substrates such as particleboard, OSB and MDF welded to the dowels almost as well as solid timber. Welded-through dowel assemblies presented better stiffness of the test joints than similar assemblies of dowelled solid timber.
Zusammenfassung
Mittels Reibschweissen hergestellte Verbindungen von Holzwerkstoffen mit Buchendübeln entsprechen den Anforderungen der Normen für Verbindungen mit metallischen Verbindungsmitteln. Die Holzwerkstoffe wie zum Beispiel Spanplatten, OSB- und MDF-Platten liessen sich mit Dübeln nahezu so gut wie Massivholz verschweissen. Die Reibschweiss-Dübelverbindung der Holzwerkstoffe wiesen eine höhere Steifigkeit auf als vergleichbare Massivholzverbindungen.
Similar content being viewed by others
References
EN 26891 (ISO 6891) (P21-310) (1991) Timber structures. Joints made with mechanical fasteners. General principles for the determination of strength and deformation characteristics
EN 1380 (P21-375) (1999) Timber structures. Test methods. Load bearing nailed joints
EN 383 (1993) Determination of assemblies local bearing performance
prEN 1995-1-1 (2003) Eurocode 5, Design of timber structures. Part 1-1: General. Common rules and rules for buildings. Final Draft
Ganne-Chedeville C, Pizzi A, Thomas A, Leban J-M, Bocquet J-F, Despres A, Mansouri HR (2005) Parameter interactions in two-block welding and the wood nail concept in wood dowels welding. J Adhes Sci Technol 19(13–14):1157–1174
Kanazawa F, Pizzi A, Properzi M, Delmotte L, Pichelin F (2005) Influence parameters in wood dowels welding by high speed rotation. J Adhes Sci Technol 19(12):1025–1038
Pizzi A, Leban J-M, Kanazawa F, Properzi M, Pichelin F (2004) Wood dowels bonding by high speed rotation welding. J Adhes Sci Technol 18(11):1263–1278
Stamm B, Natterer J, Navi P(2005) Joining wood by friction welding. Holz Roh- Werkst 63(5):313–320
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Resch, L., Despres, A., Pizzi, A. et al. Welding-through doweling of wood panels. Holz Roh Werkst 64, 423–425 (2006). https://doi.org/10.1007/s00107-005-0090-8
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00107-005-0090-8