Skip to main content
Log in

Advanced Techniques for the Characterization of Surface Structure in Polymer Thin Films and Coatings

  • Review Article -- Chemistry
  • Published:
Arabian Journal for Science and Engineering Aims and scope Submit manuscript

Abstract

This review demonstrates the importance of advanced characterization techniques, such as X-ray photoelectron spectroscopy (XPS) and near-edge X-ray adsorption fine structure (NEXAFS) spectroscopy, in accurately determining the composition/morphology of polymeric thin films. The ability to relate structure with surface properties has the potential to benefit a wide variety of science and engineering fields with direct application to the polymer coating, lithography and solar cell industries. Further advances in such areas will build on these characterization techniques and other microscopy, probe and scattering methods to allow real-time monitoring of the evolution of surface structure during processing and/or annealing. The ultimate goal of these methods is the accurate design of tunable, multifunctional surfaces.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Similar content being viewed by others

References

  1. Brandrup J., Immergut E.H., Grulke E.A.: Polymer Handbook. Wiley-Interscience, New York (2003)

    Google Scholar 

  2. Mark J.E.: Physical Properties of Polymers Handbook. Springer, Berlin (2007)

    Book  Google Scholar 

  3. Painter P.C., Coleman M.M.: Fundamentals of Polymer Science: An Introductory Text. CRC Press, Boca Raton (1998)

    Google Scholar 

  4. Vestberg R., Malkoch M., Kade M., Wu P., Fokin V.V., Sharpless K.B., Drockenmuller E., Hawker C.J.: Role of architecture and molecular weight in the formation of tailor-made ultrathin multilayers using dendritic macromolecules and click chemistry. J. Polym. Sci. Part A Polym. Chem. 45, 2835–2846 (2007)

    Article  Google Scholar 

  5. McCrum N.G., Buckley C.P., Bucknall C.B.: Principles of Polymer Engineering. Oxford University Press, Oxford (1997)

    Google Scholar 

  6. Tracton A.A.: Coatings Technology Handbook. CRC Press, Boca Raton (2005)

    Book  Google Scholar 

  7. Hawker C.J., Saville P.M., White J.W.: The synthesis and characterization of a self-assembling amphiphilic fullerene. J. Org. Chem. 59, 3503–3505 (1994)

    Article  Google Scholar 

  8. Truong, T.A.; Campos, L.M.; Matioli, E.; Meinel, I.; Hawker, C. J.; Weisbuch, C.; Petroff, P.M.: Light extraction from GaN-based light emitting diode structures with a noninvasive two-dimensional photonic crystal. Appl. Phys. Lett. 94, 023101 (2009)

    Google Scholar 

  9. Tang C.B., Hur S.M., Stahl B.C., Sivanandan K., Dimitriou M.D., Pressly E., Fredrickson G.H., Kramer E.J., Hawker C.J.: Thin Film Morphology of Block Copolymer Blends with Tunable Supramolecular Interactions for Lithographic Applications. Macromolecules 43, 2880–2889 (2010)

    Article  Google Scholar 

  10. Rzayev J., Hillmyer M.A.: Nanochannel array plastics with tailored surface chemistry. J. Am. Chem. Soc. 127, 13373–13379 (2005)

    Article  Google Scholar 

  11. Krishnan S., Weinman C.J., Ober C.K.: Advances in polymers for anti-biofouling surfaces. J. Mater. Chem. 18, 3405–3413 (2008)

    Article  Google Scholar 

  12. Killops K.L., Gupta N., Dimitriou M.D., Lynd N.A., Jung H., Tran H., Bang J., Campos L.M.: Nanopatterning Biomolecules by Block Copolymer Self-Assembly. ACS Macro Lett. 1, 758–762 (2012)

    Article  Google Scholar 

  13. Wojtecki R.J., Meador A.M., Rowan S.J.: Using the dynamic bond to access macroscopically responsive structurally dynamic polymers. Nat. Mater. 10, 14–27 (2011)

    Article  Google Scholar 

  14. Toohey K.S., Sottos N.R., Lewis J.A., Moore J.S., White S.R.: Self-healing materials with microvascular networks. Nat. Mater. 6, 581–585 (2007)

    Article  Google Scholar 

  15. Scheirs J.: Modern Fluoropolymers: High Performance Polymers for Diverse Applications. Wiley Series in Polymer Science, Chichester (1997)

    Google Scholar 

  16. Townsin R.L.: The ship hull fouling penalty. Biofouling 19, 9–15 (2003)

    Article  Google Scholar 

  17. Schultz M.P., Bendick J.A., Holm E.R., Hertel W.M.: Economic impact of biofouling on a naval surface ship. Biofouling 27, 87–98 (2011)

    Article  Google Scholar 

  18. Thomas K.V., Brooks S.: The environmental fate and effects of antifouling paint biocides. Biofouling 26, 73–88 (2010)

    Article  Google Scholar 

  19. Champ M.A.: Economic and environmental impacts on ports and harbors from the convention to ban harmful marine anti-fouling systems. Mar. Pollut. Bull. 46, 935–940 (2003)

    Article  Google Scholar 

  20. Cahn J.W.: Critical-point wetting. J. Chem. Phys. 66, 3667–3672 (1977)

    Article  Google Scholar 

  21. Schmidt I., Binder K.: Model-calculations for wetting transitions in polymer mixtures. J. Phys. (Paris) 46, 1631–1644 (1985)

    Article  Google Scholar 

  22. Nakanishi H., Pincus P.: Surface spinodals and extended wetting in fluids and polymer-solutions. J. Chem. Phys. 79, 997–1003 (1983)

    Article  Google Scholar 

  23. Jones R.A.L., Kramer E.J., Rafailovich M.H., Sokolov J., Schwarz S.A.: Surface enrichment in an isotopic polymer blend. Phys. Rev. Lett. 62, 280–283 (1989)

    Article  Google Scholar 

  24. Composto R.J., Stein R.S., Kramer E.J., Jones R.A.L., Mansour A., Karim A., Felcher G.P.: Surface enrichment in polymer blends—a neutron reflection test. Physica B 156, 434–436 (1989)

    Article  Google Scholar 

  25. Sokolov J., Rafailovich M.H., Jones R.A.L., Kramer E.J.: Enrichment depth profiles in polymer blends measured by forward recoil spectrometry. Appl. Phys. Lett. 54, 590–592 (1989)

    Article  Google Scholar 

  26. Zhao X., Zhao W., Sokolov J., Rafailovich M.H., Schwarz S.A., Wilkens B.J., Jones R.A.L., Kramer E.J.: Determination of the concentration profile at the surface of d-ps h-ps blends using high-resolution ion-scattering techniques. Macromolecules 24, 5991–5996 (1991)

    Article  Google Scholar 

  27. Schwarz S., Wilkens B., Pudensi M., Rafailovich M., Sokolov J., Zhao X., Zhao W., Zheng X., Russell T.P., Jones R.: Studies of surface and interface segregation in polymer blends by secondary ion mass spectrometry. Mol. Phys. 76, 937–950 (1992)

    Article  Google Scholar 

  28. Jones R.A.L., Kramer E.J.: The surface-composition of miscible polymer blends. Polymer 34, 115–118 (1993)

    Article  Google Scholar 

  29. Elman J.F., Johs B.D., Long T.E., Koberstein J.T.: A neutron reflectivity investigation of surface and interface segregation of polymer functional end-groups. Macromolecules 27, 5341–5349 (1994)

    Article  Google Scholar 

  30. Krausch G.: Surface-induced self-assembly in thin polymer-films. Mat. Sci. Eng. R 14, 1–94 (1995)

    Article  Google Scholar 

  31. Norton L.J., Kramer E.J., Bates F.S., Gehlsen M.D., Jones R.A.L., Karim A., Felcher G.P., Kleb R.: Neutron reflectometry study of surface segregation in an isotopic poly(ethylenepropylene) blend—deviation from mean-field theory. Macromolecules 28, 8621–8628 (1995)

    Article  Google Scholar 

  32. Geoghegan M., Krausch G.: Wetting at polymer surfaces and interfaces. Prog. Polym. Sci. 28, 261–302 (2003)

    Article  Google Scholar 

  33. Kellogg G.J., Walton D.G., Mayes A.M., Lambooy P., Russell T.P., Gallagher P.D., Satija S.K.: Observed surface energy effects in confined diblock copolymers. Phys. Rev. Lett. 76, 2503–2506 (1996)

    Article  Google Scholar 

  34. Matsen M.W.: Thin films of block copolymer. J. Chem. Phys. 106, 7781–7791 (1997)

    Article  Google Scholar 

  35. Shull K.R., Winey K.I., Thomas E.L., Kramer E.J.: Segregation of block copolymer micelles to surfaces and interfaces. Macromolecules 24, 2748–2751 (1991)

    Article  Google Scholar 

  36. Wu D., Fredrickson G.H.: Effect of architecture in the surface segregation of polymer blends. Macromolecules 29, 7919–7930 (1996)

    Article  Google Scholar 

  37. Shull K.R.: Theory of end-adsorbed polymer brushes in polymeric matrices. J. Chem. Phys. 94, 5723–5738 (1991)

    Article  Google Scholar 

  38. Ansari I.A., Clarke N., Hutchings L.R., Pillay-Narrainen A., Terry A.E., Thompson R.L., Webster J.R.P.: Aggregation, adsorption, and surface properties of multiply end-functionalized polystyrenes. Langmuir 23, 4405–4413 (2007)

    Article  Google Scholar 

  39. Halperin A., Tirrrell M., Lodge T.P.: Tethered chains in polymer microstructures. Adv. Polym. Sci. 100, 31–71 (1992)

    Article  Google Scholar 

  40. Kim B.J., Given-Beck S., Bang J., Hawker C.J., Kramer E.J.: Importance of end-group structure in controlling the interfacial activity of polymer-coated nanoparticles. Macromolecules 40, 1796–1798 (2007)

    Article  Google Scholar 

  41. Kim B.J., Fredrickson G.H., Hawker C.J., Kramer E.J.: Nanoparticle surfactants as a route to bicontinuous block copolymer morphologies. Langmuir 23, 7804–7809 (2007)

    Article  Google Scholar 

  42. Chiu J.J., Kim B.J., Kramer E.J., Pine D.J.: Control of nanoparticle location in block copolymers. J. Am. Chem. Soc. 127, 5036–5037 (2005)

    Article  Google Scholar 

  43. Jannasch P.: Surface structure and dynamics of block and graft copolymers having fluorinated poly(ethylene oxide) chain ends. Macromolecules 31, 1341–1347 (1998)

    Article  Google Scholar 

  44. Kim B.J., Chiu J.J., Yi G., Pine D.J., Kramer E.J.: Nanoparticle-induced phase transitions in diblock-copolymer films. Adv. Mater. 17, 2618–2622 (2005)

    Article  Google Scholar 

  45. Huang E., Russell T.P., Harrison C., Chaikin P.M., Register R.A., Hawker C.J., Mays J.: Using surface active random copolymers to control the domain orientation in diblock copolymer thin films. Macromolecules 31, 7641–7650 (1998)

    Article  Google Scholar 

  46. Jeong U.Y., Kim H.C., Rodriguez R.L., Tsai I.Y., Stafford C.M., Kim J.K., Hawker C.J., Russell T.P.: Asymmetric block copolymers homopolymers: Routes to multiple length scale nanostructures. Adv. Mater. 14, 274–279 (2002)

    Article  Google Scholar 

  47. Temple K., Kulbaba K., Power-Billard K.N., Manners I., Leach K.A., Xu T., Russell T.P., Hawker C.J.: Spontaneous vertical ordering and pyrolytic formation of nanoscopic ceramic patterns from poly(styrene-b-ferrocenylsilane). Adv. Mater. 15, 297–300 (2003)

    Article  Google Scholar 

  48. Tran, H.; Killops, K.L.; Campos, L.M.: Advancements and challenges of patterning biomolecules with sub-50 nm features. Soft Matter (2013, in press)

  49. Jasper J.: The surface tension of pure liquid compounds. J. Phys. Chem. Ref. Data 1, 841–1009 (1972)

    Article  Google Scholar 

  50. Krishnan S., Paik M.Y., Ober C.K., Martinelli E., Galli G., Sohn K.E., Kramer E.J., Fischer D.A.: NEXAFS depth profiling of surface segregation in block copolymer thin films. Macromolecules 43, 4733–4743 (2010)

    Article  Google Scholar 

  51. Schaub T.F., Kellogg G.J., Mayes A.M., Kulasekere R., Ankner J.F., Kaiser H.: Surface modification via chain end segregation in polymer blends. Macromolecules 29, 3982–3990 (1996)

    Article  Google Scholar 

  52. Iyengar D.R., Perutz S.M., Dai C.A., Ober C.K., Kramer E.J.: Surface segregation studies of fluorine-containing diblock copolymers. Macromolecules 29, 1229–1234 (1996)

    Article  Google Scholar 

  53. Andruzzi L., Chiellini E., Galli G., Li X.F., Kang S.H., Ober C.K.: Engineering low surface energy polymers through molecular design: synthetic routes to fluorinated polystyrene-based block copolymers. J. Mater. Chem. 12, 1684–1692 (2002)

    Article  Google Scholar 

  54. Andruzzi L., Hexemer A., Li X.F., Ober C.K., Kramer E.J., Galli G., Chiellini E., Fischer D.A.: Control of surface properties using fluorinated polymer brushes produced by surface-initiated controlled radical polymerization. Langmuir 20, 10498–10506 (2004)

    Article  Google Scholar 

  55. French, R.H.; Wheland, R.C.; Qiu, W.M.; Lemon, M.F.; Zhang, E.; Gordon, J.; Petrov, V.A.; Cherstkov, V.F.; Delaygina, N.I.: Novel hydrofluorocarbon polymers for use as pellicles in 157 nm semiconductor photolithography: fundamentals of transparency. J. Fluorine Chem. 122, 63–80 (2003)

    Google Scholar 

  56. Wang J.G., Mao G.P., Ober C.K., Kramer E.J.: Liquid crystalline, semifluorinated side group block copolymers with stable low energy surfaces: Synthesis, liquid crystalline structure, and critical surface tension. Macromolecules 30, 1906–1914 (1997)

    Article  Google Scholar 

  57. Nason T.C., Moore J.A., Lu T.M.: Deposition of amorphous fluoropolymer thin-films by thermolysis of teflon amorphous fluoropolymer. Appl. Phys. Lett. 60, 1866–1868 (1992)

    Article  Google Scholar 

  58. Lemal D.M.: Perspective on fluorocarbon chemistry. J. Org. Chem. 69, 1–11 (2004)

    Article  Google Scholar 

  59. Hansen N.M.L., Jankova K., Hvilsted S.: Fluoropolymer materials and architectures prepared by controlled radical polymerizations. Eur. Polym. J. 43, 255–293 (2007)

    Article  Google Scholar 

  60. Sauer B.B., Dee G.T.: Surface tension and melt cohesive energy density of polymer melts including high melting and high glass transition polymers. Macromolecules 35, 7024–7030 (2002)

    Article  Google Scholar 

  61. Affrossman S., Bertrand P., Hartshorne M., Kiff T., Leonard D., Pethrick R.A., Richards R.W.: Surface segregation in blends of polystyrene and perfluorohexane double end capped polystyrene studied by static SIMS, ISS, and XPS. Macromolecules 29, 5432–5437 (1996)

    Article  Google Scholar 

  62. Hwang S.S., Ober C.K., Perutz S., Iyengar D.R., Schneggenburger L.A., Kramer E.J.: Block-copolymers with low surface-energy segments—siloxane-modified and perfluoroalkane-modified blocks. Polymer 36, 1321–1325 (1995)

    Article  Google Scholar 

  63. Genzer, J.; Sivaniah, E.; Kramer, E.J.; Wang, J.G.; Körner, H.; Xiang, M.L.; Char, K.; Ober, C.K.; DeKoven, B.M.; Bubeck, R.A.; Chaudhury, M.K.; Sambasivan, S.; Fischer, D.A.: The orientation of semifluorinated alkanes attached to polymers at the surface of polymer films. Macromolecules 33, 1882–1887 (2000)

    Google Scholar 

  64. Genzer, J.; Sivaniah, E.; Kramer, E.J.; Wang, J.; Körner, H.; Char, K.; Ober, C.K.; DeKoven, B.M.; Bubeck, R.A.; Fischer, D.A.; Sambasivan, S.: Temperature dependence of molecular orientation on the surfaces of semifluorinated polymer thin films. Langmuir 16, 1993–1997 (2000)

    Google Scholar 

  65. Li X.F., Andruzzi L., Chiellini E., Galli G., Ober C.K., Hexemer A., Kramer E.J., Fischer D.A.: Semifluorinated aromatic side-group polystyrene-based block copolymers: bulk structure and surface orientation studies. Macromolecules 35, 8078–8087 (2002)

    Article  Google Scholar 

  66. Dimitriou, M.D.; Sundaram, H.S.; Cho, Y.; Paik, M.Y.; Kondo, M.; Schmidt, K.; Fischer, D.A.; Ober, C.K.; Kramer, E.J.: Amphiphilic block copolymer surface composition: effects of spin coating versus spray coating. Polymer 53 (6), 1321–1327 (2012)

    Google Scholar 

  67. Park, D.; Weinman, C.J.; Finlay, J.A.; Fletcher, B.R.; Paik, M.Y.; Sundaram, H.S.; Dimitriou, M.D.; Sohn, K.E.; Callow, M.E.; Callow, J.A.; Handlin, D.L.; Willis, C.L.; Fischer, D.A.; Kramer, E.J.; Ober, C.K.: Amphiphilic surface active triblock copolymers with mixed hydrophobic and hydrophilic side chains for tuned marine fouling-release properties. Langmuir 26, 9772–9781 (2010)

    Google Scholar 

  68. Krishnan S., Ayothi R., Hexemer A., Finlay J.A., Sohn K.E., Perry R., Ober C.K., Kramer E.J., Callow M.E., Callow J.A., Fischer D.A.: Anti-biofouling properties of comblike block copolymers with amphiphilic side chains. Langmuir 22, 5075–5086 (2006)

    Article  Google Scholar 

  69. Krishnan, S.; Wang, N.; Ober, C.K.; Finlay, J.A.; Callow, M.E.; Callow, J.A.; Hexemer, A.; Sohn, K.E.; Kramer, E.J.; Fischer, D.A.: Comparison of the fouling release properties of hydrophobic fluorinated and hydrophilic PEGylated block copolymer surfaces: Attachment strength of the diatom Navicula and the green alga Ulva. Biomacromolecules 7, 1449–1462 (2006)

    Google Scholar 

  70. Wei Q., Tajima K., Tong Y., Ye S., Hashimoto K.: Surface-segregated monolayers: A new type of ordered monolayer for surface modification of organic semiconductors. J. Am. Chem. Soc. 131, 17597–17604 (2009)

    Article  Google Scholar 

  71. Wei Q., Nishizawa T., Tajima K., Hashimoto K.: Self-organized buffer layers in organic solar cells. Adv. Mater. 20, 2211–2216 (2008)

    Article  Google Scholar 

  72. Voet V., Pick T., Park S., Moritz M., Hammack A., Urban J., Ogletree D., Olynick D., Helms B.: Interface segregating fluoralkyl-modified polymers for high-fidelity block copolymer nanoimprint lithography. J. Am. Chem. Soc. 134, 1234–1240 (2011)

    Google Scholar 

  73. Briggs, D.: Surface analysis of polymers by XPS and static SIMS. Cambridge University Press, Cambridge (1998)

  74. Moulder, J.F.; Stickle, W.F.; Sobol, P.E.; Bomben, K.D.: Handbook of X-Ray Photoelectron Spectroscopy. Physical Electronics Inc, Minnesota (1995)

  75. NIST: X-ray Photoelectron Spectroscopy Database, Version 3.5, National Institute of Standards and Technology, Gaithersburg (2003). http://srdata.nist.gov/xps/

  76. Cumpson P.J., Seah M.P.: Elastic scattering corrections in AES and XPS .2. Estimating attenuation lengths and conditions required for their valid use in overlayer/substrate experiments. Surf. Interf. Anal. 25, 430–446 (1997)

    Article  Google Scholar 

  77. Cumpson P.J.: Estimation of inelastic mean free paths for polymers and other organic materials: use of quantitative structure-property relationships. Surf. Interf. Anal. 31, 23–34 (2011)

    Article  Google Scholar 

  78. Powell, C.J.; Jablonski, A. NIST Electron Effective-Attenuation-Length Database—Version 1.3; National Institute of Standards and Technology, Gaithersburg (2011)

  79. Weinman, C.J.; Finlay, J.A.; Park, D.; Paik, M.Y.; Krishnan, S.; Sundaram, H.S.; Dimitriou, M.D.; Sohn, K.E.; Callow, M.E.; Callow, J.A.; Handlin, D.L.; Willis, C.L.; Kramer, E.J.; Ober, C.K.: ABC triblock surface active block copolymer with grafted ethoxylated fluoroalkyl amphiphilic side chains for marine antifouling/fouling-release applications. Langmuir 25, 12266–12274 (2009)

    Google Scholar 

  80. Stöhr J., Samant M.G.: Liquid crystal alignment by rubbed polymer surfaces: a microscopic bond orientation model. J. Electron Spectrosc. 99, 189–207 (1999)

    Article  Google Scholar 

  81. Stöhr, J.: NEXAFS spectroscopy. In: Springer Series in Surface Sciences. Springer, Berlin (1992)

  82. Sohn, K.E.; Dimitriou, M.D.; Genzer, J.; Fischer, D.A.; Hawker, C.J.; Kramer, E.J.: Determination of the electron escape depth for NEXAFS spectroscopy. Langmuir 25, 6341–6348 (2009)

    Google Scholar 

  83. Genzer, J.; Kramer, E.J.; Fischer, D.A.: Accounting for auger yield energy loss for improved determination of molecular orientation using soft X-ray absorption spectroscopy. J. Appl. Phys. 92, 7070–7079 (2002)

    Google Scholar 

  84. Dimitriou M.D., Martinelli E., Fischer D.A., Galli G., Kramer E.J.: Surface organization of a perfluorocarbon-functionalized polystyrene homopolymer. Macromolecules 45((10), 4295–4302 (2012)

    Article  Google Scholar 

  85. Hähner G., Kinzler M., Wöll C., Grunze M., Scheller M.K., Cederbaum L.S.: Near edge X-ray absorption fine-structure determination of alkyl-chain orientation—breakdown of the building-block scheme. Phys. Rev. Lett. 67, 851–854 (1991)

    Article  Google Scholar 

  86. Kinzler M., Schertel A., Hähner G., Wöll C., Grunze M., Albrecht H., Holzhüter G., Gerber T.: Structure of monolayer and multilayer Langmuir–Blodgett films from Cd arachidate and Ca arachidate. J. Chem. Phys. 100, 7722–7735 (1994)

    Article  Google Scholar 

  87. Bierbaum, K.; Kinzler, M.; Wöll, C.; Grunze, M.; Hähner, G.; Heid, S.; Effenberger, F.: A near-edge X-ray absorption fine structure spectroscopy and X-ray photoelectron spectroscopy study of the film properties of self-assembled monolayers of organosilanes on oxidized Si(100). Langmuir 11, 512–518 (1995)

    Google Scholar 

  88. Zou, Y.; Araki, T.; Appel, G.; Kilcoyne, A.L.D.; Ade, H.: Solid state effects in the NEXAFS spectra of alkane-based Van der Waals crystals: Breakdown of molecular model. Chem. Phys. Lett. 430, 287–292 (2006)

    Google Scholar 

  89. Wang, Y.; Zou, Y.; Araki, T.; Luening, J.; Kilcoyne, A.L.D.; Sokolov, J.; Ade, H.; Rafailovich, M.: Probing the chain and crystal lattice orientation in polyethylene thin films by near edge X-ray absorption fine structure (NEXAFS) spectroscopy. Macromolecules 43, 8153–8161 (2011)

    Google Scholar 

  90. Dimitriou, M.D.; Zhou, Z.; Yoo, HS.; Killops, K.L.; Finlay, J.A.; Cone, G.; Sundaram, H.S.; Lynd, N.A.; Barteau, K.P.; Campos, L.M.; Fischer, D.A.; Callow, M.E.; Callow, J.A.; Ober, C.K.; Hawker, C.J.; Kramer, E.J.: A general approach to controlling the surface composition of poly(ethylene oxide)-based block copolymers for antifouling applications. Langmuir 27, 13762–13772 (2011)

  91. Killops K.L., Campos L.M., Hawker C.J.: Robust, efficient, and orthogonal synthesis of dendrimers via thiol-ene “click” chemstry. J. Am. Chem. Soc. 130, 5062–5064 (2008)

    Article  Google Scholar 

  92. Campos L.M., Killops K.L., Sakai R., Paulusse J.M.J., Damiron D., Drockenmuller E., Messmore B.W., Hawker C.J.: Development of thermal and photochemical strategies for thiol-ene click polymer functionalization. Macromolecules 41, 7063–7070 (2008)

    Article  Google Scholar 

  93. Martinelli E., Agostini S., Galli G., Chiellini E., Glisenti A., Pettitt M.E., Callow M.E., Callow J.A., Graf K., Bartels F.W.: Nanostructured films of amphiphilic fluorinated block copolymers for fouling release application. Langmuir 24, 13138–13147 (2008)

    Article  Google Scholar 

  94. Martinelli E., Menghetti S., Galli G., Glisenti A., Krishnan S., Paik M.Y., Ober C.K., Smilgies D.-M., Fischer D.A.: Surface engineering of styrene/PEGylated-fluoroalkyl styrene block copolymer thin films. J. Polym. Sci. Pollut. Chem. 47, 267–284 (2009)

    Article  Google Scholar 

  95. Tan B.H., Hussain H., Chaw K.C., Dickinson G.H., Gudipati C.S., Birch W.R., Teo S.L.M., He C., Liu Y., Davis T.P.: Barnacle repellent nanostructured surfaces formed by the self-assembly of amphiphilic block copolymers. Polym. Chem. 1, 276–279 (2010)

    Article  Google Scholar 

  96. Bartels J.W., Cheng C., Powell K.T., Xu J., Wooley K.L.: Macromol. Chem. Phys. 208, 1676–1687 (2007)

    Google Scholar 

  97. Ma J., Bartels J.W., Li Z., Zhang K., Cheng C., Wooley K.L.: Synthesis and solution-state assembly or bulk state thiol-ene crosslinking of pyrrolidinone- and alkene-functionalized amphiphilic block fluorocopolymers: from functional nanoparticles to anti-fouling coatings. Aust. J. Chem. 63, 1159–1163 (2010)

    Article  Google Scholar 

  98. Campos L.M., Meinel I., Guino R.G., Schierhorn M., Gupta N., Stucky G.D., Hawker C.J.: Highly versatile and robust materials for soft imprint lithography based on thiol-ene click chemistry. Adv. Mater. 20, 3728–3733 (2008)

    Article  Google Scholar 

  99. Richardson J.J., Estrada D., DenBaars S.P., Hawker C.J., Campos L.M.J.: A facile route to patterned epitaxial ZnO nanostructures by soft lithography. Mater. Chem. 21, 14417–14419 (2011)

    Article  Google Scholar 

  100. Treat N.D., Campos L.M., Dimitriou M.D., Ma B., Chabinyc M.L., Hawker C.J.: Nanostructured hybrid solar cells: dependence of the open circuit voltage on the interfacial composition. Adv. Mater. 22, 4982–4986 (2010)

    Article  Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Craig J. Hawker.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Dimitriou, M.D., Kramer, E.J. & Hawker, C.J. Advanced Techniques for the Characterization of Surface Structure in Polymer Thin Films and Coatings. Arab J Sci Eng 39, 1–13 (2014). https://doi.org/10.1007/s13369-013-0916-3

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s13369-013-0916-3

Keywords

Navigation