Abstract
AA7475 alloy was deformed up to 25% elongation in INSTRON at 788K. The grain boundary sliding due to this superplastic deformation was measured by Scanning Electron Microscope. The microstructure and texture development due to this deformation at elevated temperature was analyzed from the Orientation Image Microstructures i.e. the Electron Back Scattered Diffraction Image. The Orientation Image Microstructures revealed that superplastic deformation was associated with recovery and recrystallization in-situ process.
Similar content being viewed by others
Abbreviations
- ɛ:
-
Strain
- t:
-
Total
- gbs:
-
Grain boundary sliding
- d:
-
Diffusion
- L:
-
Gauge length
- w:
-
Width of Grain boundary sliding
- m:
-
Meter (length scale)
- μm:
-
Micrometer (length scale)
- K:
-
Kelvin (Temperature)
- ϕ:
-
Phi (Geometrical constant)
- \( \bar L \) :
-
Mean linear intercept
- °:
-
Degree (Misorientation Angle)
- s:
-
Second (Time scale)
References
Zelin M G and Guillard S, Mater. Sci. and Tech., 15 (1999) 309.
Zelin M G, Guillard S and Chaudhary P K, Materials Science Forum, 137 (1997) 243.
Langdon T G, Philo Mag, 22 (1970) 689
Bate P S, Humphreys F J, Ridley N and Zhang B, Acta Materialia 53 (2005) 3059.
Pérez-Prado M T, Cristina M C, Ruano O A and González-Doncel G, Materials Science and Engineering A, 244 (1998) 216.
Pérez-Prado M T, Gonzalez-Doncel G, Ruano1 O A and Mcnelley T R, Acta materialia., 49 (2001) 2259.
Engler O, Hirsch J and Lücke K, Acta Metall., 43 (1995) 121.
Humphrey F J and Hatherly M, Recrystallization and Related Annealing Phenomena, Oxford, Elsevier, (2004).
Mukhopadhyay P, Aluminium 78 (2002) 912.
Hirsch J and Lücke K, Acta Metall, 33 (1985) 1927.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Mukhopadhyay, P., Biswas, S. & Chokshi, A.H. Deformation characterization of superplastic AA7475 alloy. Trans Indian Inst Met 62, 149–152 (2009). https://doi.org/10.1007/s12666-009-0020-2
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12666-009-0020-2